Nr. crt.
|
Autor (i)
|
Titlu lucrare
|
Rezumat
|
Sectiune
|
Poster
|
Voturi
|
1
|
Academia de Stiinte a Moldovei Institutul de Energetica
|
Instalatie eoliana – sursa nepoluanta de energie
|
Instalatie eoliana de 3 KW putere destinata asigurarii cu
energie electrica a consumatorilor individuali. Instalatia functioneaza in
regim autonom la viteze ale vantului mai mari de 3-8 m/s. Instalatia
energetica eoliana consta din turbina multipala de vant, cu sistem de
orientare, turn compus din cateva sectii, generator asincron cu autoexcitatie
si reductor-multiplicator.
|
1
|
http://www.cttecotech.ro/salon/postere/P1.ppt
|
0
|
2
|
Academia de Stiinte a Moldovei Institutul de Energetica
|
Dispozitiv de excitatie si stabilizare a tensiunii generatorului actionat de
aeromotor
|
Esenta inventiei consta in excitarea la frecventa
ridicata, ca urmare a divizarii bateriei de condensatoare in doua
subansambluri comutate de un contactor dirijat, precum si in reglarea
factorului de calitate Q al circuitului de excitatie si functionarea in bucla
de histerezis a traductoarelor de tensiune. Ca rezultat se majoreaza
siguranta de functionare a generatorului la variatii ale vitezei vantului si
la varierea sarcinii, precum si indicii de calitate ai energiei produse:
devierea tensiunii < 2% si a frecventei ± 1,5%.
|
2
|
http://www.cttecotech.ro/salon/postere/P2.ppt
|
0
|
3
|
Afrasinei Mihai
|
Dispozitiv modulat pentru incarcare si transport
|
Module device for loading and transport, integrated from
lateral ears for catching the ensemble at installationused for loading,
solidarly with a elevation beam on which there are attached some plates for
catching, provided with bolts for catching the body of contrivance, provided
with teh bolts where are instalated hydraulic cylinders acted by a hydraulic
panel through some articulations, which acts as taking arms where there are
fixed the loading bowls.
|
3
|
http://www.cttecotech.ro/salon/postere/P3.png
|
0
|
4
|
Afrasinei Mihai
|
Dispozitiv de prindere si rotire
|
Device for catching and whirling of cylinder with mass by
two tons, specialy for loading, unloading and stovage operations
thiscilynders in and from merchandiser trucks. The contrivance acts some jaws
for catching through a hydraulic mechanism.
|
3
|
http://www.cttecotech.ro/salon/postere/P4.png
|
0
|
5
|
Afrasinei Mihai
|
Pompa manuala
|
Manual pump intended for extraction of the fluids,
provided with four vents which works in cross, one of left face with one of
right back, and one of left back with one of right face, in relationship with
action of a handle, turn/return, all the time the existing fluid at penting
linkage.
|
3
|
http://www.cttecotech.ro/salon/postere/P5.png
|
0
|
6
|
Agentia de proprietate intelectuala a Republica Moldova
|
Sistemul de protectie a proprietatii intelecutale in Republica Moldova
|
Proprietatea intelectuala. Înregistrarea si acordarea
titlurilor de protectie juridica a obiectelor de proprietate industriala
(OPI) inventii, modele de utilitate, desene si modele industriale, marci
de produse si servicii, noi soiuri de plante, topografii ale circuitelor
integrate, drepturilor de autor si conexe, înregistrarea rezultatelor
cercetarilor stiintifice etc. Înregistrarea contractelor de transmitere a
drepturilor asupra OPI (cesiune, licenta, franchising). Atestarea si
înregistrarea reprezentantilor în proprietate industriala. Pregatirea si
reciclarea specialistilor în domeniul proprietatii industriale. Editarea
Buletinului Oficial de Proprietate Industriala (BOPI). Acordarea serviciilor
de consultanta în domeniul legislatiei nationale si al dreptului international
în domeniul protectiei proprietatii industriale, cercetari documentare în
domeniul brevetelor de inventie si marcilor, evaluarea OPI.- functii ale
AGEPI
|
20
|
http://www.cttecotech.ro/salon/postere/P6.png
|
0
|
7
|
Alecu C., Enache I., Serban S.
|
Aditiv antipoluant pentru benzine auto si procedeu de obtinere a acestuia
|
Brevetul se refera la o compozitie aditivanta pentru
benzinele auto în vederea reducerii gradului de poluare, diminuarii
depunerilor de calamina, cresterii continutului de apa în benzina cu efect
benefic asupra arderii in motor si reducerii coroziunii gazelor de esapament.
|
1
|
http://www.cttecotech.ro/salon/postere/P7.ppt
|
0
|
8
|
Alecu C., Popescu L., Militaru V.
|
Procedeu pentru valorificarea deseurilor de plumb provenite de la
acumulatoare uzate
|
Brevetul se refera la un procedeu de valorificare
integrala a contintului acumulatoarelor acide uzate prin transformarea
acestuia în compusi cu plumb reactivi, stabilizatori PVC, pigmenti
anorganici, costurile de productie a acestora fiind mult diminuate.
|
1
|
http://www.cttecotech.ro/salon/postere/P8.ppt
|
0
|
9
|
Alecu C., Popescu M.
|
Procedeu de obtinere a solutiei GIEMSA -RAS
|
Brevetul se refera la un procedeu de obtinere a unui
reactiv analitic special - GIEMSA – utilizat în analizele hematologice si a
biopsiilor, eliminandu-se din analiza colorarea suplimentara cu albastru de
metilen. Se reduc astfel consumurile de materiale, de utilitati si de
manopera si se inlocuiesc solventii de puritate farmaceutica cu cei de
puritate tehnica.
|
6
|
http://www.cttecotech.ro/salon/postere/P9.ppt
|
0
|
10
|
Alecu C., Popescu M.
|
Procedeu de obtinere a solutiei MAY-GRÜNWALD-RAS
|
Brevetul se refera la un procedeu de obtinere a unui
reactiv analitic special – MAY-GRÜNWALD – utilizat in analizele hematologice
si a biopsiilor cu rezultate foarte bune, avand ca efect scaderea costurilor
de productie si economii valutare.
|
6
|
http://www.cttecotech.ro/salon/postere/P10.ppt
|
0
|
11
|
Alexoaie-Conachi Petre si al.
|
Borna geotopografica
|
Marking in maximal security conditions of topographical
elevation marks. The solution is given by constraining the mark in soil with
the help of anchorage and survey the horizontal and vertical moving by using
LASER techniques.
|
4
|
http://www.cttecotech.ro/salon/postere/P11.png
|
0
|
12
|
Alexoaie-Conachi Petre si al.
|
Dispozitiv pentru ameliorarea vizualizarii reperelor geotopografice
|
The device is used in topographical work for measures
execution. It contains a polarizer and an analyzer, the light intensity and
reflection by the fixed point are diminished by rotating the polarizing plan
of the analyzer.
|
4
|
http://www.cttecotech.ro/salon/postere/P12.png
|
0
|
13
|
Alexoaie-Conachi Petre, Antohi Constantin Marin
|
Dispozitiv pentru verificarea verticalitatii
|
The increased measure precision in topographical work. The
solution is given by generating a sonorous signal when placing vertically a
leveling rod during measurement using a low power LASER.
|
4
|
http://www.cttecotech.ro/salon/postere/P13.png
|
0
|
14
|
Andrei C.
|
Procedeu de obtinere a copolimerilor alternanti acetat de vinil-anhidrida
maleica
|
Inventia se refera la un procedeu continuu de obtinere a
copolimerilor alternanti acetat de vinil – anhidrida maleica (1:1) cu
greutate moleculara mare, la temperatura de 60-120°C.
|
6
|
http://www.cttecotech.ro/salon/postere/P14.ppt
|
0
|
15
|
Andrei C., Andrei D.C., Andrei G., Balteanu V.
|
Extract de lemn dulce (glycyrrhiza glabra) si procedeu de obtinere
|
Prezenta inventie se refera la obtinerea unui concentrat
de lemn dulce de provenienta romaneasca, utilizat in preparate
imunostimulatoare, antivirale, antiinflamatorii si puternic antioxidante.
|
5
|
http://www.cttecotech.ro/salon/postere/P15.ppt
|
0
|
16
|
Andrei C., Andrei G., Luncasu-Rolea E., Moraru E.
|
Fotostabilizator pentru poliolefine
|
Inventia se refera la fotostabilizarea poliolefinelor cu
fotostabilizatori de tip dezactivator (quencher) – compusi organici de
nichel, cu inalta eficienta si compatibilitate cu polimerul.
|
6
|
http://www.cttecotech.ro/salon/postere/P16.ppt
|
0
|
17
|
Andrei C., Balteanu V.
|
Procedeu pentru obtinerea radicalilor cu viata lunga
|
Inventia prezinta un procedeu de obtinere a radicalilor
liberi cu viata lunga de tip nitroxil prin oxidarea catalitica a aminelor
impiedicate steric Radicalii liberi cu viata lunga de tip nitroxil se pot
utiliza intr-o varietate de procese tehnice si biologice: obtinerea de
polimeri si materiale avansate pentru componente electronice, optica,
biomateriale, stabilizarea polimerilor, stoparea stresului oxidativ al
organismelor vii, marcare membrane celulare, etc.
|
6
|
http://www.cttecotech.ro/salon/postere/P17.ppt
|
0
|
18
|
Andrei C., Bivolaru I., Dima L., Andrei I.
|
Agent pentru desalinarea si dezemulsionarea titeiului si procedeu pentru
obtinerea acestuia
|
Inventia se refera la un agent pentru desalinarea si
dezemulsionarea titeiurilor cu eficienta sporita, pe baza de monoetilenglicol
propoxilat si etoxilat si/sau orto-sec-butilfenol propoxi-etoxilat, precum si
la un procedeu de obtinere a acestuia.
|
6
|
http://www.cttecotech.ro/salon/postere/P18.ppt
|
0
|
19
|
Andrei C., Campeanu A., Duca M., Nitescu E.
|
Compozitie pentru imbunatatirea proprietatilor benzinelor ecologice
|
Inventia se refera la o compozitie pe baza de compusi
organici, care adaugata in proportie de 5-10% vol. in benzinele de distilare
atmosferica sau de reformare catalitica creste cifra octanica, imbunatateste
arderea, reduce fenomenul de coroziune si previne formarea de depuneri pe
piesele motorului.
|
6
|
http://www.cttecotech.ro/salon/postere/P19.ppt
|
0
|
20
|
Andrei C., Campeanu A., Savu T.
|
Compozitii adezive pentru reparatii rutiere
|
Inventia se refera la o compozitie adeziva pentru
reparatii rutiere pe baza de elastomeri si rasini sintetice si la procedeul
de obtinere a acesteia.
|
15
|
http://www.cttecotech.ro/salon/postere/P20.ppt
|
0
|
21
|
Andrei C., Hogea I., Campeanu A.
|
Agent pentru spalarea masinilor de prelucrare a polimerilor
|
Inventia se refera la un produs pentru curatarea rapida si
fara pierderi a masinilor folosite la obtinerea si prelucrarea polimerilor
colorati si a compozitelor polimerice cu umpluturi anorganice. Prin folosirea
produsului la curatare a utilajelor de prelucrare se reduc substantial
pierderile de polimer si creste productivitatea utilajelor.
|
6
|
http://www.cttecotech.ro/salon/postere/P21.ppt
|
0
|
22
|
Andrei C., Negulescu A., Andrei G., Manescu P.
|
Procedeu pentru obtinerea acidului fumaric
|
Inventia se refera la un procedeu pentru obtinerea
acidului fumaric si consta in aceea ca in scopul cresterii conversiei
concomitent cu controlarea dimensiunii cristalelor, reactia are loc in prezenta
unor polimeri si copolimeri polari solubili in apa (polietilenglicoli,
poliacrilamida, acid poliacrilic, copolimeri etilena-anhidrida maleica,
copolimeri acetat de vinil-anhidrida maleica etc.) adaugati inainte de
izomerizare in proportie de 0,1 – 3% fata de acidul maleic.
|
6
|
http://www.cttecotech.ro/salon/postere/P22.ppt
|
0
|
23
|
Andrei C., Tomescu V., Andrei G., Dumitru I.
|
Compozitie poliolefinica reticulata si ignifugata
|
Inventia se refera la o compozitie poliolefinica
reticulata si ignifugata cu stabilitate dimensionala la temperaturi inalte si
rezistenta marita la foc, utilizata pentru izolarea conductorilor electrici.
|
6
|
http://www.cttecotech.ro/salon/postere/P23.ppt
|
0
|
24
|
Andrei Constantin
|
Procedeu continuu pentru fabricarea copolimerilor etilena-acetat de vinil
|
Inventia se refera la un procedeu continuu pentru
fabricarea copolimerilor etilena-acetat de vinil (EVA) prin copolimerizarea
monomerilor in suspensie, in prezenta de initiatori radicalici.
|
6
|
http://www.cttecotech.ro/salon/postere/P24.ppt
|
0
|
25
|
Andrei D.C., Andrei C.
|
Compozitie de polietilena fotoreticulata
|
Inventia se refera la o compozitie de polietilena
fotoreticulabila utilizata la fabricarea de folii pentru agricultura cu
proprietati de rezistenta mecanica imbunatatite si durata de viata de minim 2
sezoane de cultura agricola.
|
6
|
http://www.cttecotech.ro/salon/postere/P25.ppt
|
0
|
26
|
Andrei D.C., Andrei C.
|
Procedeu nou pentru tratarea psoriazisului prin stoparea stresului oxidativ
|
Noul procedeu revendicat de autori are la baza stoparea
stresului oxidativ (deteriorarea celulelor vii de catre radicalii liberi
rapizi si nocivi din organism) printr-un sistem format din doua specii active
care blocheaza radicalii liberi nocivi.
|
6
|
http://www.cttecotech.ro/salon/postere/P26.ppt
|
0
|
27
|
Andrei D.C., Andrei C., Balteanu V.
|
Adezivi ecologici
|
Adezivii ecologici conform inventiei se obtin din polimeri
naturali cu adaos de agenti antimicotici netoxici. Adezivii prezinta o buna
adezivitate la hartie, sticla, metale, polimeri si alte substraturi poroase.
Sunt rezistenti la caldura si mucegaiuri, sunt netoxici, neinflamabili si au
biodegradabilitate controlata.
|
6
|
http://www.cttecotech.ro/salon/postere/P27.ppt
|
0
|
28
|
Andrei G., Constantinescu V., Moraru M., Andrei D.C.,
Pogorevici D., Vasile N.
|
Compozitie polimerica cu proprietati magnetice
|
Inventia se refera la o compozitie polimerica cu
proprietati magnetice constituita din 78-95% ferita de bariu, 4-20% elastomer
ales dintre: copolimer etilena-propilena, copolimeri etilena-propilena-diena,
cauciuc poliizoprenic, cauciuc polibutadienic sau cauciuc termoplastic SBS si
1-2% amestec stearina si stearat bibazic de plumb.
|
6
|
http://www.cttecotech.ro/salon/postere/P28.ppt
|
0
|
29
|
Andrei G., Pita S., Campeanu A., Andrei D.C., Duca M., Stan Gh.
|
Combustibili ecologici
|
Inventia se refera la combustibili ecologici obtinuti din
uleiuri vegetale transesterificate si combustibili minerali. Combustibilii
ecologici prezinta cifra cetanica imbunatatita, proprietati de ungere
superioare, reduc cu cel putin 50% poluarea atmosferei cu hidrocarburi
nearse, CO si SO2.
|
6
|
http://www.cttecotech.ro/salon/postere/P29.ppt
|
0
|
30
|
Anghel Ioan s.a.
|
Procedeu de obtinere a condensatoarelor cu tantal miniatura cu electrolit
solid
|
Inventia se refera la descrierea procedeului de obtinere a
condensatoarelor cu tantal miniatura cu electrolit solid
|
2
|
http://www.cttecotech.ro/salon/postere/P30.ppt
|
0
|
31
|
Antohi Constantin Marin
|
Dispozitiv pentru evacuarea apei din incinte
|
The device allows the quick disposal of water through
subterranean pipes due to a one-way closing flap endowed with an electronic
system for certain opening.
|
1
|
http://www.cttecotech.ro/salon/postere/P31.png
|
0
|
32
|
Antohi Constantin Marin
|
Aparat pentru colectarea probelor de apa
|
The apparatus is formed by a launching device with winch,
an electronically device for measuring the collecting depth, a probe for
punctual collecting without disturbing the bed silt concentration and a
device for warning when the river bed is reached.
|
1
|
http://www.cttecotech.ro/salon/postere/P32.png
|
0
|
33
|
Antohi Constantin Marin
|
Traductor pentru precipitatii atmosferice
|
The transducer for atmospherically precipitations with
improved measuring possibilities; the impulses are realized at every buck up
of tilting buckets with water from precipitation, the heating of the
catchments funnel to measure the volume of water from solide precipitation
and detecting the chemical or radioactive contamination produced by
precipitations.
|
1
|
http://www.cttecotech.ro/salon/postere/P33.png
|
0
|
34
|
Antohi Constantin Marin
|
Aparat pentru indicarea caracteristicilor curentilor atmosferici de aer
|
The invention is designated for meteorologically use,
hydro technical constructions, environmental protection. Using an ensemble of
transducers it can measure the speed and direction of air currents, alerts
the reach of critical limits, indicates the continuance of wind on certain
direction.
|
1
|
http://www.cttecotech.ro/salon/postere/P34.png
|
0
|
35
|
Antohi Constantin Marin
|
Aparat pentru determinarea gradului de compactare
|
The apparatus use a portable device which autocorrects
itself allowing an inductive accelerometer mounted into an electronically
scheme to measure the compacted degree. This degree is proportional with the
braking acceleration at the accelerometer’s free fall from an established
height; the signal is put up analogically or digitally.
|
1
|
http://www.cttecotech.ro/salon/postere/P35.png
|
0
|
36
|
Antohi Constantin Marin
|
Toba de esapament ecologica
|
The muffler is formed by two semi-cylinders, laterally bounded
by an adjusting collar. Inside are circular elements, of different diameters
with a distance between . The circular elements have a series of apertures to
give the gases a circular motion.
|
1
|
http://www.cttecotech.ro/salon/postere/P36.png
|
0
|
37
|
Antohi Constantin Marin
|
Instalatie de protectie si dezinfectia aerului
|
The installation for treating the air from the biological
cleaning plants consists from covering the basins with PAS structures; under
the roof are mounted ozone generators for oxidizing the chemical substances
from the air above the used water.
|
1
|
http://www.cttecotech.ro/salon/postere/P37.png
|
0
|
38
|
Antohi Constantin Marin
|
Instalatie pentru iluminare solara a incintelor si galeriilor
|
The illumination is realized by light reflection using a
complex system of plane mirrors with automatic placing. The command is given
by sensor placed on the windows.
|
1
|
http://www.cttecotech.ro/salon/postere/P38.png
|
0
|
39
|
Antohi Constantin Marin
|
Telepluviograf avertizor
|
The invention refers to a device for measuring, warning
and registering the liquid, solid and mixed rainwater, warning the operator
when a critical limit of intensity and quantity is reached (15 l/m2
/ 3h; 30l/m2 / 6h)
|
1
|
http://www.cttecotech.ro/salon/postere/P39.png
|
0
|
40
|
Antohi Constantin Marin
|
Sonda piezometrica
|
The probe consist of a cylinder from plastic with a
counterweight mounted into the cylinder to assure the verticality during
immersion. The existing air chamber is needed for an Archimedean force which,
at a certain point will annihilate the tension appeared in the wire due to
the weight of the probe.
|
1
|
http://www.cttecotech.ro/salon/postere/P40.png
|
0
|
41
|
Antohi Constantin Marin
|
Dispozitiv pentru ionizarea aerului de admisie la motoarele cu ardere interna
|
The device is formed by an inducting bobbin mounted banked
together with the ignition bobbin, commanded by a magnetically driven REED
sensor; the bobbin charges two tubes with mercury vapors to generate ozone
for increasing the quantity
|
1
|
http://www.cttecotech.ro/salon/postere/P41.png
|
0
|
42
|
Antohi Constantin Marin
|
Dispozitiv de protectie
|
The birds fly using the magnetic field lines around the
Earth; any disturbance of these lines cause panic around birds. The invention
consist in a rectangular pyramid with aerodynamic cones on the lateral
corners designed to produce a spinning movement thereby creating a variable
magnetic field due to permanent magnets mounted onto the cones sustaining
supports.
|
1
|
http://www.cttecotech.ro/salon/postere/P42.png
|
0
|
43
|
Antohi Constantin Marin
|
Aparat portabil pentru foraje si piezometre
|
The device uses a measurement sonde. The displacement of
the reference safety level versus the measured level is transformed in
electricel impulses, diplayed digitally. One impulse represents a 1 mm displacement
of the sonde.
|
4
|
http://www.cttecotech.ro/salon/postere/P43.png
|
0
|
44
|
Antohi Constantin Marin s.a.
|
Aparat pentru teletransmisia variatiei nivelului apei
|
Due to a probe that descends on command the device allows
the transmittance of the variation between a reference level and water level
during 24 hours.
|
4
|
http://www.cttecotech.ro/salon/postere/P44.png
|
0
|
45
|
Antohi Constantin Marin, Giurma Ion
|
Avertizor de depasire a parametrilor de debit si turbiditate in canale
deschise
|
The warning device is formed by a module placed into the
collecting channel for the infiltrated water through the dam body and equipped
with a resistive transducer for level measuring and an optically transducer
for turbidity measuring; the warning device can signalize the reach of
critical level and turbidity crest.
|
4
|
http://www.cttecotech.ro/salon/postere/P45.png
|
0
|
46
|
Antohi Constantin Marin s.a.
|
Dispozitiv automat pentru indicarea nivelului la o cota superioara de
referinta
|
The invention refers to an automatic device used in
teletransmision of the level variation in piezometrical tubes from the body
of earth or concrete dams or walls.
|
4
|
http://www.cttecotech.ro/salon/postere/P46.png
|
0
|
47
|
Antohi Constantin Marin s.a.
|
Indicator de nivel
|
The level indicator is formed by a core bar with swimmer
that can rotate around an articulation. The core bar operates, with the help
of a semicircular pane, a series of proximity transducers connected to a code
panel.
|
4
|
http://www.cttecotech.ro/salon/postere/P47.png
|
0
|
48
|
Antohi Constantin Marin s.a.
|
Aparat pentru indicarea evolutiei unor rosturi in plansee de beton cu
transmisie la distanta
|
The apparatus is formed from a displacement transducer
axial mounted together with a measure plate on both sides of a rift; the
transducer transforms the rectilinear move in electrical impulses due to an
optical transducer, one impulse represents a move by 0,01 mm.
|
4
|
http://www.cttecotech.ro/salon/postere/P48.png
|
0
|
49
|
Antohi Constantin Marin s.a.
|
Instalatie pentru indicarea tasarilor
|
The installation contains a number of concentrically tubes
mounted on the top with measure plates; the lower side is build-in the ground
a different depths. Fro measuring is used a displacement transducer which
generates electrical impulses, one impulse represents a 0,1 mm. The
displacement of the measuring plates is realized by a servo-mechanism that
rotates the displacement transducer.
|
4
|
http://www.cttecotech.ro/salon/postere/P49.png
|
0
|
50
|
Antohi Constantin Marin s.a.
|
Aparat pentru masurarea nivelului lichidelor cu afisare la distanta
|
To determine the level variations the device use a
capacitive transducer for levels formed by a core bar 1m long; the core bar
in positioned by an actuator mechanism when a maximal or minimal level is
reached, increasing thereby the vertical deviation.
|
4
|
http://www.cttecotech.ro/salon/postere/P50.png
|
0
|
51
|
Antohi Constantin Marin s.a.
|
Indicator proportional de nivel
|
The indicator is formed by a module with a hyperbolic
wall, mounted onto a collecting channel fro the infiltrated water through the
bodies of concrete or composite dams; the level of the water in the channel,
therefore the debit, is being measured with a capacitive level transducer.
|
4
|
http://www.cttecotech.ro/salon/postere/P51.png
|
0
|
52
|
Antohi Constantin Marin s.a.
|
Dispozitiv pentru indicarea nivelului de separatie dintre doua lichide
nemiscibile
|
The device is formed by two detachable assemblies who
percepts the different density between the two corps, the vertical move of
the probe being transformed into impulses by an optical transducer and
numbered
by an adding counter.
|
5
|
http://www.cttecotech.ro/salon/postere/P52.png
|
0
|
53
|
Antohi Constantin Marin
|
Instalatie de pasteurizare
|
The installation contains a case with two vertically
positioned UV generators, mounted in the focal of an ellipsoidal mirror; the
reflected radiation is focused in the central area where is a quartz tube
through which the liquid to be pasteurized circulates.
|
7
|
http://www.cttecotech.ro/salon/postere/P53.png
|
0
|
54
|
Antohi Constantin Marin s.a.
|
Indicator de nivel al materialelor solide din silozuri si buncare
|
The invention is formed from a level transducer which,
through a command unit in a dispatcher room, can emit electrical impulses by
descending a measure probe which automatically rises to the reference point
after reaching the content’s surface.
|
9
|
http://www.cttecotech.ro/salon/postere/P54.png
|
0
|
55
|
Antohi Constantin Marin, Caramalau C.
|
Modul pentru tratarea aerului din instalatiile de ventilare
|
The module resolves the problem by using an ozone
generator with UV radiations generators mounted into an aerodynamically cone
fitted onto a pipe together with a fan, pipe which is inserted into the
ventilation tube. The ozone, based on his high oxidizer power eliminated the
unpleasant odours from the air output.
|
10
|
http://www.cttecotech.ro/salon/postere/P55.png
|
0
|
56
|
Antohi Constantin Marin
|
Deumidificator
|
The air is aspirated into a cavity cooled by Peltier
elements, the water vapors are condensed and colected by a reservoir with
radiations generator for water disinfection. The electric suply is generated
by a solar panel.
|
10
|
http://www.cttecotech.ro/salon/postere/P56.png
|
0
|
57
|
Antohi Constantin Marin, Antohi Angela
|
Aparat portabil pentru sterilizarea apei potabile
|
The filtering and water disinfection in realised by an
active carbon filter and with non-ionizing germicide radiations focused by
special mirrors.
|
11
|
http://www.cttecotech.ro/salon/postere/P57.png
|
0
|
58
|
Antohi Constantin Marin s.a.
|
Instalatie pentru obtinerea apei potabile
|
The subterranean and surface water chemical or
bacteriological infested is circulated through a filtering battery and then
filtrated with activated carbon and disinfected using UV-C radiations focused
by special mirrors.
|
11
|
http://www.cttecotech.ro/salon/postere/P58.png
|
0
|
59
|
Antohi Constantin Marin
|
Instalatie portabila pentru obtinerea apei potabile
|
The infested water is filtered using mechanical and
membranous filters, filters from activated carbon at small granulation to
improve the organoleptic characteristics of water. The disinfection is
realized with UV-C fascicles, all the operation are being controlled by a
microprocessor. The electric suply is assured by a solar panel and an
acumulator
|
11
|
http://www.cttecotech.ro/salon/postere/P59.png
|
0
|
60
|
Antohi Constantin Marin s.a.
|
Miniclimatizor ecologic
|
The apparatus is formed from a metallically case endowed
with a mini fan which attract the air inside the case where a tube with
electrical discharge in mercury vapors emits germicide UV radiation focalized
in the focal of an ellipsoidal mirror increasing the efficiency; the cooling
and heating of the air is realized by Peltier elements.
|
11
|
http://www.cttecotech.ro/salon/postere/P60.png
|
0
|
61
|
Antohi Constantin Marin s.a.
|
Incinta pentru dezinfectie
|
The apparatus is formed by a metallically case that has on
the lower side a series of drawers for bestowing the medical instruments and
the soft material for a safe keep in sterile atmosphere. In the upper side
are two UV radiation generators mounted onto the focal of spherical mirrors.
One of the drawers has Peltier elements to increase or decrease the
temperature inside after the usage.
|
11
|
http://www.cttecotech.ro/salon/postere/P61.png
|
0
|
62
|
Antohi Constantin Marin
|
Instalatie pentru dezinfectia aerului cu flux concentrat de radiatie
neionizanta AEROGERM
|
The air is aspirated on the upper side by a fan, filtrated
by a filter 3 and given a spiral move by a statically screw 5 so the volume
of air will came in contact with two UV-C radiation generators mounted into
the focal of a mirror; the ozone released is absorbed by activated carbon
filter.
|
11
|
http://www.cttecotech.ro/salon/postere/P62.png
|
0
|
63
|
Antohi Constantin Marin
|
Instalatie pentru dezinfectia aerului si suprafetelor cu fascicol variabil de
radiatii neionizante
|
The obtainment of variable radiation fascicles by modifying
the source position towards a special mirror. As a result, the divergent,
convergent and parallels fascicles make the device useful in disinfection of
the air and surfaces especially in bacteriological atack.
|
11
|
http://www.cttecotech.ro/salon/postere/P63.png
|
0
|
64
|
Antohi Constantin Marin
|
Instalatie de dezinfectie EUROGERM
|
The installation is formed by a metallically case which
has on the upper side two UV-C radiation generators mounted in the focal of
two ellipsoidal mirrors to create a concentrated fascicle of radiation. For
soft material disinfection on the upper side also is mounted an ozone
generator.
|
11
|
http://www.cttecotech.ro/salon/postere/P64.png
|
0
|
65
|
Antohi Constantin Marin
|
Instalatie pentru dezinfectia obiectelor pe o banda transportoare
|
The exposure of objects or products to a concentrated flow of non-ionising
germicidal radiations by using a specialized generator, the objectsor
products are moving on a conveyer belt with an adequately speed
|
11
|
http://www.cttecotech.ro/salon/postere/P65.png
|
0
|
66
|
Antohi Constantin Marin
|
Instalatie cu radiatie neionizanta pentru depozitarea intermediara a
deseurilor
|
The installation is formed by a rectangular case for storing the wastes which
has on the lid a cylindrical mirror with UV radiation generator on the focal
for stopping the degradation of the wastes. A switch opens and closes the
power in relation with the filling degree of the installation.
|
11
|
http://www.cttecotech.ro/salon/postere/P66.png
|
0
|
67
|
Antohi Constantin Marin s.a.
|
Instalatie pentru decontaminare bacteriologica
|
Contains a water-jet washing module, a chemical treating module, a drying
module followed by a module for treating the car body with UV-C radiations by
translating the generators; for treating the air and water from the washing
process the installation contains a treating plant and an air-treating
module.
|
11
|
http://www.cttecotech.ro/salon/postere/P67.png
|
0
|
68
|
Antohi Constantin Marin, Pavnev D.
|
Husa cu ecran antiradiatie
|
The casing is realized by a textile material formed by interlacing vegetal
fibers with carbon fibers, material designed by telephone’s dimensions,
double sewed only in one lateral side for blocking the eventually apertures
which appears as new emission centers of electro-magnetic radiation.
|
13
|
http://www.cttecotech.ro/salon/postere/P68.png
|
0
|
69
|
Antohi Constantin Marin
|
Aparat pentru masurat viteza unui fluid
|
For measuring the speed of water in a canal or river the device contains a
resistive transducer powered by the water current through a metallic draw bar
united with a little sphere, the angle formed with the vertical direction in
the measuring point represents the water speed in that moment.
|
1
|
http://www.cttecotech.ro/salon/postere/P69.png
|
0
|
70
|
Arghirescu M.
|
Inductor de calire izoterma cu curenti de inductie
|
Inductorul este alcatuit din trei spire, spira (1) realizând austenitizare la
temperatura de 900…1000°C, iar spirele (2 si 3) având niste gauri pe partea
interioara, realizând transformarea bainitica la 300…500°C (sau sub 300°C, în
functie de otel), prin actiunea simultana a curentilor electrici de inductie
si a apei de racire ce iese prin aceste gauri în regim cvasi-izoterm.
Reglajul se poate realiza prin presiunea apei sau cu niste cleme de obturare
alternativa a unora din gauri.
|
2
|
http://www.cttecotech.ro/salon/postere/P70.ppt
|
0
|
71
|
Arghirescu M.
|
Scaun cu efect de rezonanta electromagnetica bioenergizanta
|
Scaunul bioterapeutic are picioarele din spate prelungite cu doua tevi din
plastic dur sau inox, având inserat un set de magneti cilindrici, cu o
valoare minima a câmpului de cca 200 Oe, un alt set de magneti fiind dispus
în cotierele scaunului, spatarul fiind prevazut cu un strat rezonant
electromagneticdin sârma de cupru, conectat printr-un ansamblu electronic la
un generator de unde electromagnetice cu frecventa de 0,05…3 GHz, alimentat
în momentul asezarii pe scauna unei persoane, sau la iesirea unui
amplificator de antena TV.
|
2
|
http://www.cttecotech.ro/salon/postere/P71.ppt
|
0
|
72
|
Arghirescu M.
|
Arzator cu plasma obtinuta din solutii apoase, în particular cu fuziune
deuteronica
|
Arzatorul este compus dintr-o cavitate tubulara cu trei tuburi, formând un
ghid de unde multiplu si un traiect continuu de circulare a solutiei apoase
introduse printr-un tub al unei antene-horn de microunde, conectata la un
generator de microunde de 2,45 GHz frecventa modulata în impulsuri, un catod
multiplu, un anod inelar de generare de plasma rece, conectat la o sursa de
înalta tensiune, un anod circular pentru generare de plasma calda, fixat în
dreptul catoduluipe un suport ceramical unei parti de disociere moleculara,
ardere, ionizare intensa, accelerare si confinare a ionilor pozitivi, care
mai cuprinde un electrod anodic de accelerare a electronilor emisi de catodul
încalzit si cel putin un electrod catodic de accelerare a ionilor pozitivi,
întregul ansamblufiind introdus în interiorul unui magnet de confinare a
plasmei, favorizare a rezonantei electronice de spin si pentru cataliza
fuziunii nucleare prin inducere de tranzitie sau captare electronica pe nivel
sub-fundamental.
|
2
|
http://www.cttecotech.ro/salon/postere/P72.ppt
|
0
|
73
|
Arghirescu M.
|
Senzor de detectare si combatere a adormirii la volan
|
Sistemul se bazeaza pe detectarea unui unghi de rotire critic si pe
semnalizarea sonora printr-un circuit electronic cuprinzand o minisonerie tip
buzer sau muzicala cu un minidifuzor, alimentata cu baterii. Soneria are in
circuitul de alimentare un miniintrerupator cu mercur de forma unui sector de
cerc, din plastic, de maxim 5 cm lungime cu mercur in interior, lungimea
arcului corespunzand unei valori critice de rotire a volanului masinii sau de
aplecare a capului soferului.
|
2
|
http://www.cttecotech.ro/salon/postere/P73.ppt
|
0
|
74
|
Arghirescu M.
|
Avertizor cu sonerie pentru undita
|
Avertizorul este compusdintr-un intrerupator electric, un ansamblu cu
minisonerie, minidifuzor si baterie electrica, fixat intr-o carcasa
izolatoare si o curea de fixare de partea inferioara a primului segment al
unditei.
|
2
|
http://www.cttecotech.ro/salon/postere/P74.ppt
|
0
|
75
|
Arghirescu M.
|
Colector de praf electrostatic fara alimentare pentru covoare
|
Colectorul este format dintr-un tambur din material plastic usor electrizabil
prin frecare, cu suprafata cilindrica perfect neteda, solidar cu doua roti
dintate, din plastic, avand axul fixat intr-un cadru. Actionarea colectorului
se face prin electrizarea tamburului frecat de o bucata de pasla, la rotirea
acestuia sub actiunea fortei de impingere aplicata manual.
|
2
|
http://www.cttecotech.ro/salon/postere/P75.ppt
|
0
|
76
|
Arghirescu M.
|
Casa solara cu terasa
|
Casa solara cu terasa permite folosirea acoperisului casei propriu-zise
partial ca sera, prin valorificarea energiei solare si partial ca terasa, in
varianta acoperita sau descoperita, prin construirea podului casei cu
pardoseala avand o usoara inclinatie de scurgere, de maxim 15 grade, peretii
fiind prevazuti cu ferestre glisante din material transparent sau
semitransparent rezistent. Acoperisul include niste tevi inseriate intre
circuitul de aductie a apei si circuitul unui dus, conectat in paralel cu
circuitul unor tevi gaurite fin, pentru udarea prin picurare a serei.
|
4
|
http://www.cttecotech.ro/salon/postere/P76.ppt
|
0
|
77
|
Arghirescu M.
|
Curea de ceas cu electret, bioterapeutica
|
Cureaua de ceas este confectionata din doua parti din plexiglas facut
electret pe cale termica, la 150°C, in camp electric, polarizate pe fete, in
care se insereaza la turnarea in forma 1..2 sarme magneticedin ferita,
magnetizate, pentru efect magnetoterapeutic si 2..1 sarme de cupru sau alama,
pentru rezonanta cu microundele fondului cosmic (1…21 cm lungime de unda),
precum si doua sarme din inox cu rol de parte incheietoare, de fixare la
mana. Inventia prezinta avantajul ca cele trei componente: camp magnetic,
camp electric, camp electromagnetic, conlucreaza sinergic, marind efectul
bioterapeutic.
|
11
|
http://www.cttecotech.ro/salon/postere/P77.ppt
|
0
|
78
|
Arghirescu M.
|
Dispozitiv terapeutic cu electret si metoda de realizare
|
Dispozitivul este compus dintr-un disc de 8..10 cm diametru si circa 5 mm
grosime, din material dielectric – de exemplu plexiglas, facut electret în
câmp electric intens, care are inserat un circuit L-C constituit dintr-o
antena spirala de microunde, din sârma de Cu-Âem relativ groasa, simpla sau
dubla, ale carei capete sunt conectate electric la un condensator fix plat si
o cantitate de pulbere magnetica, calculata astfel încât dupa magnetizarea pe
fete discul sa genereze la suprafata un câmp magnetic de minim 200 Oe.
|
11
|
http://www.cttecotech.ro/salon/postere/P78.ppt
|
0
|
79
|
Arghirescu M.
|
Constructie piramidala pentru electroterapie cu unde scurte, trusa cu
cearceaf de electroterapie pentru aceasta
|
Inventia se refera la o constructie piramidala de electroterapie cu unde
electromagnetice scurte, precum si la o trusa continand un cearsaf pentru
electroterapie, care utilizeaza metoda de electroterapie in camp condensator.
Este folosit efectul de piramida generat de o constructie in forma de
piramida cu peretii din material dielectric, cu 1..2 paturi, pentru tratarea
cu microunde de slaba intensitate, simultan cu tratarea cu unde scurte cu
frecventa in domeniul MHz, realizata cu o trusa de electroterapie.
|
11
|
http://www.cttecotech.ro/salon/postere/P79.ppt
|
0
|
80
|
Arghirescu M.
|
Costum electroterapeutic si ansamblu rezonant de utilizare
|
Inventia se refera la un costum electroterapeutic care utilizeaza
electroterapia in camp inductor, prin rezonanta electromagnetica cu un
dispozitiv de rezonanta avand o infasurare solenoidala sai si un magnet
conectat la un generator de unde scurte sau la o antena TV, sau doar cu
undele electromagnetice din spatiu. Pe elementele de vestimentatie ale
costumului sunt fixate prin coasere infasurari solenoidale din sarma de Cu-Em
flexibila, de minim 0,3 mm diametru. Puterea generatorului de unde scurte
este reglabila in gama de 5…300 W, iar gama de frecventa a acestuia poate
cuprinde si gama de microunde de 3…80 cm lungime de unda.
|
11
|
http://www.cttecotech.ro/salon/postere/P80.ppt
|
0
|
81
|
Arghirescu M.
|
Jucarie cu efect luminos "TANTALACHE"
|
Jucarie cu efect luminos tip figurina umana prezentand un cap semitransparent
pictat, cu 1…2 LED-uri montate la interior, un gat si un corp din plastic.
Efectul luminos se produce prin inchiderea aleatorie a circuitului de
alimentare a LED-urilor, de la niste baterii, ca urmare a unei lovituri
mecanice usoare aplicate preferential capului. Revenirea in pozitia initiala
a figurinei este asigurata de un suport in forma de sector de cilindru ce
contine o cantitate mica de plumb. Nu este necesara intreruperea alimentarii
in repaos.
|
17
|
http://www.cttecotech.ro/salon/postere/P81.ppt
|
0
|
82
|
Arghirescu M.
|
Joc de sah in varianta "Pacifista" si tabla de sah specifica
|
Jocul de sah in varianta „pacifista” este jucat cu aceleasi piese si aceleasi
reguli de mutare a pieselor ca la varianta cunoscuta, dar se joaca pe o tabla
cu numar impar de carouri, de preferinta 81, in doi sau trei jucatori,
urmarindu-se ocuparea cu piesa-rege a caroului central al tablei, cu rol de
„tron”. Realizarea acestui obiectiv finalizeaza jocul cu „sah terminus”.
|
17
|
http://www.cttecotech.ro/salon/postere/P82.ppt
|
0
|
83
|
Arghirescu M.
|
Metoda si instalatie de fuziune nucleara la rece
|
Inventia se refera la o metoda si la o instalatie de fuziune nucleara la rece
utilizand apa deuterizata cu oxid de deuteriuca electrolit, cu o cantitate
mica de saruri de litiu, rubidiu sau potasiu, cu aplicarea unei tensiuni de
alimentare de 0,3..10 KV in impulsuri de polaritate alternanta cu o frecventa
de minim 100 kHz sau si a unui camp magnetic oscilant cu o frecventa de minim
15 kHz sau de rezonanta magnetostrictiva la nivelul unui catod poros, intr-o cuva
de electroliza cu pereti metalici dubli, in care etapele de fuziune la rece
sunt realizate simultan intre niste electrozi-placa din nichel si niste
electrozi-sita din sarma de nichel sau wolfram.
|
20
|
http://www.cttecotech.ro/salon/postere/P83.ppt
|
0
|
84
|
Arghirescu M.
|
Cap de dus cu sapun utilizabil si pentru bucatarie
|
Inventia se refera la un cap de dus cu sapun, utilizabil si pentru bucatarie,
din plastic, cu o carcasa cilindrica cu fundul gaurit pe un sector inelar, o
cutie de sapun lichid cu perete cilindric, o fanta triunghiulara, un capac
fixat la partea superioara , profilat cu cu o portiune centrala mai groasa,
pentru ermetizarea cutiei si un distribuitor cu o parte cilindrica fixata pe
profilul cilindric al cutiei si avand o fanta dreptunghiulara corespondenta
cu fanta anterioara, cu care se intersecteaza gradual la actionarea prin
rotire a unui distribuitor, pentru curgerea dozata a sapunului lichid.
|
20
|
http://www.cttecotech.ro/salon/postere/P84.ppt
|
0
|
85
|
Arghirescu M.
|
Outil pour ecrire avec du parfum
|
L’outil peut étre realisé en trois variantes: porte-mine avec du parfum,
crayon avec du parfum et stylo avec du parfum. Il realise, pendant
l’utilisation, une ambiance olfactive plaisante, stimulative pour l’activité
intellectuelle.
|
20
|
http://www.cttecotech.ro/salon/postere/P85.ppt
|
0
|
86
|
Arghirescu M.
|
Dop pentru sticle din plastic de turnare a lichidului fara detasarea acestuia
|
Inventia se refera la un dop pentru sticle din plastic, pentru turnarea
lichidului fara detasarea acestuia, care se compune dintr-un dop de plastic
propriu-zis, avand la partea superioara circulara un decupaj in forma de trei
sferturi de cerc si o parte plata dreptunghiulara, pozitionata vertical la
marginea acestui decupaj, pentru sigilarea dopului prin plastifiere si
dintr-o parte in forma de disc cu diametru egal cu diametrul interior al
dopului propriu-zis, avand o parte plata dreptunghiulara pozitionata central
si vertical pe partea discoidala, de cca doua ori mai inalta decat partea de
sigilare si de lungime egala cu diametrul decupajului.
|
20
|
http://www.cttecotech.ro/salon/postere/P86.ppt
|
0
|
87
|
Arghirescu M.
|
Masa piramida de energizare a lichidelor
|
Inventia se refera la o piramida din plastic, plexiglas, sticla sau lemn, cu
rol de cavitate rezonanta pe lungimea de unda de 21 cm a microundelor
fondului cosmic, pentru energizarea unui lichid stocat intr-o sticla plasata
in centrul acesteia, cca 24 de ore.
|
20
|
http://www.cttecotech.ro/salon/postere/P87.ppt
|
0
|
88
|
Arghirescu M. s.a.
|
Tapis avec effet de resonance electromagnetique biocompatible
|
L’invention se refere ŕ un tapis avec effet d’antenne resonante en spectre
d’ondes electromagnetiques electrotherapeutiques, en particulair en le
domaine de la resonance electronique du spin, composé par troix couches de
feuilles d’aluminium avec role de circuite oscilant LC ouvert, connectable ŕ
une antenne TV et une couche magnetique, le circuit LC ainsi realisé en etant
fermé par le corp de la personne situé sur le tapis.
|
8
|
http://www.cttecotech.ro/salon/postere/P88.ppt
|
0
|
89
|
Arghirescu M. s.a.
|
Centura terapeutica si ansamblu rezonant de utilizare
|
Centura are niste magneti discoidali polarizati pe fete, care au un camp
magnetic la suprafata de 300-600 Oe, favorabil rezonantei electronice de
spin, lipiti echidistant pe o parte mediana plata, din plastic, inserata
intre doua parti din piele ale centurii. Pe partea din plastic este bobinat
un strat solenoidal din sarma de Cu-Em, cu capetele conectate la doua placi
metalice inoxidabile, lipite de partea dinspre corpul persoanei. Circuitul
solenoidal rezoneaza electromagnetic cu o antena solenoidala plata inserata
in spatarul unui scaun electroterapeutic sau intr-un covor electroterapeutic.
|
11
|
http://www.cttecotech.ro/salon/postere/P89.ppt
|
0
|
90
|
Arghirescu M. s.a.
|
Aparat Kirilian cu efect de piramida
|
Inventia se refera la un aparat Kirlian cu efect de piramida pentru
fotografierea aurei corpurilor, cuprinzand un generator de inalta tensiune si
inalta frecventa, pulsurile de tensiune generate fiind aplicate pe placiloe
unui condensator intre care este dispusa o placa fotografica cu tesutul
biologic de studiat dispus pe ea. Undele electromagnetice generate in
interiorul cavitatii prin efectul de piramida, de rezonanta cu microundele
fondului cosmic, micsoreaza valoarea critica a campului electric de
descarcare cu efect Kirlian, necesara fotografierii aurei corpului studiat.
Pentru fotografierea aurei cu electrod transparent, varful cavitatii
piramidale are o gaura de montare a unui aparat fotografic.
|
11
|
http://www.cttecotech.ro/salon/postere/P90.ppt
|
0
|
91
|
Arghirescu Marius
|
Cap de magnetizare a lichidelor pentru recipiente cu filet
|
Inventia se refera la un cap de magnetizare a lichidelor pentru recipiente cu
gatul in forma de filet. Capul de magnetizare, conform inventiei, are un corp
care se ataseaza la un gat al unui recipient, este tubular, din plastic sau
din metal, in el fiind fixati minimum doi magneti toroidali cu sctiunea
rectangulara si are la partea inferioara diametrul interior egal cu diametrul
exterior filetat al gatului unui recipient si filet interior corespunzator
filetului exterior al gatului recipientului, pentru infiletarea unui capac
din plastic, iar pentru curgerea lichidului, in cavitatea centrala este
introdus un tub subtire din plastic.
|
3
|
http://www.cttecotech.ro/salon/postere/P91.ppt
|
0
|
92
|
Arghirescu Marius
|
Instalatie de electropatentare si tratament termochimic
|
Inventia se refera la o instalatie de electropatentare si tratament
termochimic prin efect electroreyistiv si prin efect electroinductiv, montata
in cuprinsul unei linii de trefilare a unor sarme cu un diametru de 0,5 …3
mm. Instalatia cuprinde o parte de austenitizare si de alamire si o parte de
perlitizare si de zincare sau de cromizare, alcatuite dintr-o succesiune de
tuburi ceramice, asamblate in perechi.
|
3
|
http://www.cttecotech.ro/salon/postere/P92.ppt
|
0
|
93
|
Arghirescu Marius
|
Cercel de discoteca
|
Inventia se refera la un cercel, destinat tinerilor, prin care se poate
realiza un efect artistic luminos, in special in timpul dansului, cercelul
propriu-zis fiind prevazut cu o dioda electroluminiscenta-LED. Prin
simplitatea sa maxima, cercelul are o greutate mai redusa fata de alte tipuri
si un cost mai scazut.
|
17
|
http://www.cttecotech.ro/salon/postere/P93.ppt
|
0
|
94
|
Arghirescu Marius
|
Ghiveci de plante, cu udare prin picurare
|
Inventia se refera la un ghiveci de plante, cu udare prin picurare, cu apa
stocata in doua rezervoare incorporate. Ghiveciul se compune dintr-o cavitate
tip tava adanca, din plastic, tabla, lemn etc, cu spatiul interior separat de
doi pereti despartitori din plastic in trei cavitati, cavitatea din mijloc
reprezentand ghiveciul propriu-zis, iar cavitatile laterale, mai mici,
reprezentand doua rezervoare de apa. Peretii despartitori prezinta gauri fine
de circa 0,5 mm, iar intre pereti este fixata o teava din plastic, avand si
ea gauri fine.
|
20
|
http://www.cttecotech.ro/salon/postere/P94.ppt
|
0
|
95
|
Arghirescu Marius
|
Vasla pentru avans normal
|
Inventia se refera la o vasla pentru avans normal, in directia de observare a
vaslasului, al unei barci cu tractiunea realizata prin forta musculara. Vasla
se compune dintr-un corp cilindric, prevazut cu un maner la un capat si o parte
triunghiulara la capatul opus si o pala dreptunghiulara cu o evazare la un
capat, fixata de corp printr-un ax ce permite o rotire cu 90 grade a palei
fata de partea triunghiulara , unghiul minim fiind realizat la impingerea
vaslei, iar unghiul maxim la tractiunea ei.
|
17
|
http://www.cttecotech.ro/salon/postere/P95.ppt
|
0
|
96
|
Arghirescu Marius
|
Programator de aragaz
|
Inventia se refera la un programator electro-mecanic, utilizand o priza
programabila pentru un singur circuit tip PEM – 24 h, adaptata corespunzator
inchiderii programate a patru ochiuri de aragaz simultan, cu durata maxima de
programare de 24 h. Instalatia este conceputa ca o anexa atasabila la un
aragaz obisnuit, prezentandu-se sub forma unei placi cu patru module
electromecanice cu roata dintata cu clichet, actionata electromagnetic.
|
20
|
http://www.cttecotech.ro/salon/postere/P96.ppt
|
0
|
97
|
Arghirescu Marius
|
Motor magnetic cu lichid magnetic
|
Inventia se refera la un motor magnetic cu lichid magnetic, utilizat pentru
constructia de dispozitive mecanice de mica putere sau jucarii. Acest motor
asigura conversia energiei magnetice de interactie cu un lichid magnetic in
energie mecanica, printr-o constructie continand elemente rotorice
constituite din magneti permanenti, dreptunghiulari, polarizati pe fete si
montati radial in jurul unui ax de rotatie.
|
3
|
http://www.cttecotech.ro/salon/postere/P97.ppt
|
0
|
98
|
Arghirescu Marius
|
Pompa cu magneti
|
Inventia se refera la o pompa cu magneti, destinata in special pomparii
fluidelor usor inflamabile, care necesita o instalatie de transport perfect
etansa. Pompa este prevazuta cu niste cilindri din material nemagnetic,
etansi, avand supape de aspiratie si supape de refulare, precum si cu niste
pistoane din magnet permanent, ce culiseaza liber in interiorul cilindrilor.
|
3
|
http://www.cttecotech.ro/salon/postere/P98.ppt
|
0
|
99
|
Arghirescu Marius
|
Suport incalzitor de farfurii sau cani din tabla prin curenti de inductie
|
Inventia se refera la un suport incalzitor de farfurii sau cani din tabla
prin curenti de inductie cu frecventa retelei de 50 Hz. Suportul este compus
dintr-o baza izolatoare electric, pe care este fixat un corp cilindric,
subtire, de asemenea izolator, cu dimensiuni mai mici decat ale canii, cu
doua sectiuni dreptunghiulare, sub care este bobinata o infasurare inductoare
conectata la reteaua de curent alternativ de 220 V.
|
20
|
http://www.cttecotech.ro/salon/postere/P99.ppt
|
0
|
100
|
Arghirescu Marius
|
Motor cu magneti
|
Inventia se refera la un motor cu magneti, ce utilizeaza conversia energiei
potentiale de repulsie magnetica intre niste magneti rotorici in forma de
sector cilindric, polarizati pe fete si un stator cilindric, polarizat pe fete,
eliminand fortele de franare prin intermediul unui ecran magnetic din tabla
feroasa sau antiferomagnetica.
|
3
|
http://www.cttecotech.ro/salon/postere/P100.ppt
|
0
|
101
|
Arghirescu Marius
|
Motor cu magneti folosind energia gravitationala
|
Inventia se refera la un motor cu magneti care foloseste interactiunea
magnetica repulsiva dintre un magnet statoric de forma unui sfert de
suprafata cilindrica, polarizat pe fete, dispus la partea inferioara intre
unghiurile de 180 si 270 grade si un numar de 36 de magneti rotorici,
cilindrici sau paralelipipedici, polarizati pe fetele plane, dispusi rigid la
capetele unor tije subtiri care trec prin niste gauri diametral opuse
practicate intr-un cilindru rotoric din aluminiu, ce se poate roti pe un
suport.
|
3
|
http://www.cttecotech.ro/salon/postere/P101.ppt
|
0
|
102
|
Arghirescu Marius
|
Procedeu si instalatie de tratament termomecanic si termochimic, cu incalzire
electrica, pentru tragerea sarmelor si barelor
|
Procedeul consta in incalzirea electrica, prin efect de rezistenta electrica
sau prin curenti de inductie, cu deformarea de tragere in filiere a
semifabricatului astfel incalzit, in trepte si realizarea simultana a unui
tratament termochimic in treptele intermediare, in solutii apoase sau bai de
saruri incalzite in tuburi ceramice, utilizand caldura semifabricatului.
Instalatia este constituita dintr-o combinatie de filiere sau matrite de
tragere, intercalate corespunzator, cu cel putin un contactor electric
exterior si cel putin un tub ceramic de tratament termic si termochimic.
|
3
|
http://www.cttecotech.ro/salon/postere/P102.ppt
|
0
|
103
|
Arghirescu Marius
|
Curea de ceas, magnetoterapeutica
|
La o curea de ceas obisnuita, din plastic semirigid, se ataseaza o a doua
curea, de care sunt fixate prin lipire si prin coliere din plastc, doua
elemente magnetice de 1,5… 3 mm grosime, polarizate pe fete, avand
polarizarea magnetica a fetelor reciproc opusa. Avantajul consta in faptul ca
se realizeaza un efect magnetoterapeuticeficace, cu un adaos de greutate
minimal la incheietura mainii.
|
11
|
http://www.cttecotech.ro/salon/postere/P103.ppt
|
0
|
104
|
Arghirescu Marius
|
Cuva pentru elecropatentare si pentru tratament slab electrochimic
|
Inventia se refera la o cuva pentru electropatentare cu saruri topite si
pentru tratament slab electrochimic al sarmelor, in timpul trefilarii
acestora, tratamentul slab electrochimic fiind realizat simultan cu
mentinerea subcritica de electropatentare.
|
3
|
http://www.cttecotech.ro/salon/postere/P104.ppt
|
0
|
105
|
Arghirescu Marius
|
Cap de dus, cu rezervor de sapun lichid
|
Capul de dus este constituit dintr-un corp cu capac perforat in interiorul
caruia este prevazut un rezervor cu sapun lichid, dispus pe niste ghidaje,
care are forma unui cilindru strabatut de de un orificiu tubular central, in
peretii caruia este prevazuta o fanta orizontala de scurgere a sapunului
lichid. In orificiul tubular central al rezervorului este introdusa partea
centrala cilindrica a unui distribuitor de sapun lichid.
|
20
|
http://www.cttecotech.ro/salon/postere/P105.ppt
|
0
|
106
|
Arghirescu Marius
|
Inductor pentru tratament termic de calire cvasiizoterma, cu curenti de
inductie
|
Inductorul este alcatuit din trei spirecirculare, inseriate, dintre care
ultimele doua au niste gauri dispuse pe doua randuri si echidistant pe partea
interioara a acestora, suprafata piesei tratate termic fiind austenitizata de
prima spira negaurita si apoi adusa in domeniul subcritic al transformarii,
prin actiunea simultana acurentilor electrici de inductie, generati la
parametrii de curent din zona de austenitizare si a apei de racire care
circula prin spire si iese prin gaurile ultimelor doua.
|
3
|
http://www.cttecotech.ro/salon/postere/P106.ppt
|
0
|
107
|
Arghirescu Marius
|
Motor-generator magnetic
|
Inventia se refera la un motor magnetic care permite si generarea de energie
electrica in timpul functionarii lui, folosind conversia energiei potentiale
de repulsie magnetica in energie cinetica de rotatie. Motorul-generator este
format dintr-un numar impar sau par de magneti statorici in forma de bara,
polarizati longitudinal sau transversal si un numar par sau impar de magneti
rotorici, de asemenea in forma de bara, polarizati la fel si dispusi repulsiv
fata de cei statorici, fiind ecranati pe un sfert cu un ecran feromagnetic
din tabla silicioasa.
|
3
|
http://www.cttecotech.ro/salon/postere/P107.ppt
|
0
|
108
|
Arghirescu Marius
|
Procedeu si dispozitiv de distrugere a rocilor, cu microunde
|
Procedeul de distrugere a rocilor cu microunde se realizeaza prin actiunea
simultana asupra materialului solid de distrus cu un fascicul de microunde in
impulsuri cu frecventa fundamentala de 2,45 GHz sau o alta frecventa de
rezonanta caracteristica corpului solid de distrus si a unui camp electric de
inalta tensiune (10..30 KV) aplicat pulsatoriu, preferabil cu freventa de
rezonanta fononica a retelei cristaline a corpului solid de distrus.
Procedeul se bazeaza pe efectul ionizant al microundelor in impulsuri si pe
actiunea campului electrostatic de separare a sarcinilor electrice.
|
5
|
http://www.cttecotech.ro/salon/postere/P108.doc
|
0
|
109
|
Aurel Tudorica
|
Gratar ecologic
|
Ecological grill is the healthy way to cook in your own kitchen. It is used
for meet, fish and vegetables in the same time and no burnt gas come into
contact with the food. It does not release smoke, and the entire device is
made of alimentary stainless steel, and therefore no contamination may occur.
|
7
|
http://www.cttecotech.ro/salon/postere/P109.png
|
0
|
110
|
Azzouz A, T .Sajin, A. Craciun
|
Procedeu de obtinere a agentului de coagulare catalitica alaptelui, agent de
coagulare catalitica a lapteluiu si procedeu de coagulare catalitica a
laptelui
|
The invention relates to the diary industry, namely to a
technology for catalytic coagulation of the freshly drawn milk. It is
proposed a milk catalytic coagulation agent (variants) and processes for
obtaining thereof. As coagulation agent is used activated clay of
montmorillonite type. The clay is activated either with organic acids from
the series of food acids or by thermal treatment of its ammoniacal or calcic
form.
|
7
|
http://www.cttecotech.ro/salon/postere/P110.png
|
0
|
111
|
Badea C. Dan
|
Procedeu pentru amestecarea electrostatica a lichidelor
|
Procedeu pentru emulsionarea electrostatica a lichidelor , caracterizat prin
aceea ca unul din electrozi este chiar lichidul ce trebuie dispersat în faza
continua a celuilalt lichid.
|
3
|
http://www.cttecotech.ro/salon/postere/P111.png
|
0
|
112
|
Badea C. Dan
|
Procedeu pentru purificarea electrostatica a germenilor de grâu si separator
pentru aplicarea procedeului
|
Procedeu pentru purificarea electrostatica a germenilor de grâu, care asigura
eliminarea tarâtelor si a prafului dintre germeni
|
7
|
http://www.cttecotech.ro/salon/postere/P112.png
|
0
|
113
|
Badea C. Dan
|
Procedeu electrostatic de conditionare sanogena a produselor cerealiere
|
Procedeu electrostatic pentru conditionarea sanogena a cerealelor, caracterizat
prin aceea ca prevede precuratire magnetica cuplata cu separarea
electrostatica a impuritatilor si sterilizarea electrostatica a produselor
finite.
|
9
|
http://www.cttecotech.ro/salon/postere/P113.png
|
0
|
114
|
Badea C. Dan
|
Separator electrostatic pentru curatirea miezurilor de seminte oleaginoase
|
Procedeu pentru încarcarea cu sarcina electrica a cojilor, deplasarea
materialului intr-un camp electrostatic si actiunea fortelor electrostatice
asupra cojilor in scopul eliminarii acestora
|
9
|
http://www.cttecotech.ro/salon/postere/P114.png
|
0
|
115
|
Badea C. Dan
|
Procedeu vibroelectrostatic de purificare a produselor cerealiere
|
Procedeu pentru purificarea electrostatica a cerealelor, care asigura
eliminarea impuritatilor
|
9
|
http://www.cttecotech.ro/salon/postere/P115.png
|
0
|
116
|
Badea C. Dan
|
Uscator solar cu efect de concentrare a radiatiei solare
|
Uscator solar cu efect de concentrare a radiatiei solare, care asigura
uscarea semintelor vegetale
|
9
|
http://www.cttecotech.ro/salon/postere/P116.png
|
0
|
117
|
Badea Dan C.
|
Procedeu pentru curatirea electrostatica a germenilor de porumb
|
Procedeul prevede un camp electrostatic convergent, intensitatea de camp
maxima in zona de separare, delimitat, in aceasta extremitate, de un concentrator
cilindric de camp electric, a caror interactiune conduce la antrenarea
tuturor grupelor si germenilor dupa traiectorii proprii de separare.
|
2
|
http://www.cttecotech.ro/salon/postere/P117.png
|
0
|
118
|
Badea Dan C.
|
Procedeu electrostatic pentru tratarea atermica a berii
|
Procedeul prevede pulverizarea lichidului in camp electrostatic, de inalta
tensiune, campul fiind creat intre un electrod racordat la sursa de inalta
tensiune si un alt electrod constituit de chiar lichidul de tratat, care se
afla in contact cu carcasa incintei de tratare, conectat la potentialul
pamantului.
|
7
|
http://www.cttecotech.ro/salon/postere/P118.png
|
0
|
119
|
Badulescu D. s.a.
|
Procedeu pentru obtinerea unor lacuri electroizolante pentru acoperirea
conductorilor metalici
|
Procedeul se bazeaza pe prepararea unui poliester de joasa greutate
moleculara, printr-o reactie de policondensare dintre acizi
paradicarboxilici-acizi dicarboxilici obtinuti prin reactia dintre anhidrida
trimetilica si diaminodifenilmetan si amestecuri de alcooli ce contin grupe
de eter alifatic.
|
6
|
http://www.cttecotech.ro/salon/postere/P119.png
|
0
|
120
|
Badulescu D. s.a.
|
Procedeu de fabricare a lacurilor electroizolante pentru emailarea
conductorilor metalici
|
Inventia se refera la un procedeu de fabricare a lacurilor electroizolante
poliesterimidice si poliesterimida modificate THEIC pentru emailarea
conductorilor metalici de cupru sau aluminiu.
|
6
|
http://www.cttecotech.ro/salon/postere/P120.png
|
0
|
121
|
Badulescu D. s.a.
|
Procedeu de obtinere a unor lacuri electroizolante
|
Procedeu de obtinere a unor lacuri electroizolante de emailare, pe baza de
rasini poliesterice poliesterimidice, poliesterimidamidice si solventi
eterici ciclici.
|
6
|
http://www.cttecotech.ro/salon/postere/P121.png
|
0
|
122
|
Badulescu D. s.a.
|
Procedeu de obtinere a unor pelicule electroizolante depuse pe conductori
metalici
|
Procedeu de obtinere a unor pelicule electroizolante depuse pe conductori
metalici caracterizat prin obtinerea unei rasini poliesterimidice cu greutate
moleculara de 3000-4000 prin copolicondensarea unui poliol ales dintre
etilenglicol, glicerina, tris-(beta-hidroxietilizocianurat) si
pentaeritritol, cu un acid paradicarboxilic ales dintre acidul tereftalic,
dimetiltereftalat si acidul p,p’-difenilmetandicarboxilic si cu un acid
metadicarboxilic cu ciclu imidic preformat..
|
6
|
http://www.cttecotech.ro/salon/postere/P122.png
|
0
|
123
|
Badulescu D. s.a.
|
Procedeu de fabricare a unor lacuri electroizolante
|
Procedeu de fabricare a unor lacuri electroizolante destinate emailarii
conductorilor metalici, caracterizat prin aceea ca se obtine o rasina
poliesterica prin condensarea unor acizi dicarboxilici cu un amestec de
polioli si metildiglicol, la o temperatura cuprinsa intre 150…210°C, urmata
de policondensarea unui acid paradicarboxilic cu tris izocianurat in mediul
de reactie format.
|
6
|
http://www.cttecotech.ro/salon/postere/P123.png
|
0
|
124
|
Baerle Alexey, Gutsanu Vasile
|
Processes for obtaining natural colorants
|
These two inventions includes the chopping of the raw
materiel, the optimal conditions of the colorants extraction from rowan
berries, separation and purification of two red colorants. Inventions permit
obtaining individual hydrosolving and liposolving colorants of highly
purification which may be used in the food, pharmaceutical and cosmetic
industries
|
6
|
http://www.cttecotech.ro/salon/postere/P124.png
|
0
|
125
|
Bahnarel I., L. Coretchi, E. Samotîia, M.Moldovan
|
Procedeu de evaluare a statutului imun
|
Procedeul propus are o eficacitate inalta, este economic avantajos de
utilizat deoarece tehnologia testului este simpla, standardizata si
accesibila pentru institutiile cointeresate. Procedeul permite depistarea
corelatiei dintre expresarea indicelui tensionarii raspunsului imun si
dirularea clinica a patologiilor. Astfel expresarea incompleta a CD4+ si CD8+
a determinat acutizarea patologiei organice, coexpresarea lor - manifestarea
maladiilor cronice, balansarea - starea de remisie.Procedeul propus sporeste
posibilitatea de evaluarea a statutului imun individual, în situatie
concreta, fara compararea obligatorie cu norma. Procedeul poate fi utilizat
în investigarea pacientilor expusi la factori stresogeni, inclusiv la doze
mici de radiatii
|
11
|
http://www.cttecotech.ro/salon/postere/P125.ppt
|
0
|
126
|
Bahnarel I, Samotaia E, Coretchi L, Moldovan M
|
Method for evaluation of immunologic effects
|
Se propune un procedeu original de evaluare a influentei factorilor
stresogeni, inclusiv al radiatiilor ionizante asupra efectelor imunologice.
Procedeul este caracterizat prin analizarea ratei limfocitelor T-CD4+
(T-limfocite-helper) si T-CD8+ (T-limfocite-suppressor) fata de
T-CD3+(pan T-limfocite), studiate cu ajutorul imunofenotiparii cu
ajutorul anticorpilor monoclonali cu marcarea luminiscenta FITC.
|
11
|
http://www.cttecotech.ro/salon/postere/P126.ppt
|
0
|
127
|
Baltag Octavian Ioan
|
Traductor de camp magnetic
|
The invention reffers to a transducer for low magnetic
field fated to measure the magnetic fields.
|
2
|
http://www.cttecotech.ro/salon/postere/P127.png
|
0
|
128
|
Banabic, D., Deacu, L., Pop, I.I.
|
Electromagnet proportional
|
Brevetul se refera la o noua solutie constructiva de electromagnet
proportional, utilizat ca element de comanda proportionala
|
2
|
|
0
|
129
|
Banciu Cristina Antonela, Rimbu Gimi Aurelian, Bondar ana Maria, Enescu
Elena, Stamatin Ioan
|
Material nanocompozit carbonic transparent la unde electromagnetice
|
Carbon nanocomposite as transparent material for
electromagnetic waves consists in a carbon matrix on based of asphaltum oil
pitch by purified pit coal in which is nanocarbon with 50 – 60 nm size,
obtained by laser pirolysys form olefiant gas precursor, in 0,05, 0,1, 1 and
1,5% mass percentage, further the material is thermal treated at 440o and 900o C
temperatures, the finite product having the attenuation factor 0,3 – 9 dB
range, in the frequency domain of 7 – 17 GHz.
|
13
|
http://www.cttecotech.ro/salon/postere/P129.png
|
0
|
130
|
Bartha Iosif
|
Metoda si aparat pentru investigarea gradului de infundare a conductelor de
distributie in retelele de irigatie
|
Changing head loss for a given flow by modification of the
cross section due ti clogging and washing.
|
2
|
http://www.cttecotech.ro/salon/postere/P130.png
|
0
|
131
|
Bartha Iosif
|
Regulator automat pentru curgere libera
|
Changing of contraction and discharge coefficients
directing path lines and the orifice cross section by positioning and form of
the mobile mask hinged with the gate.
|
2
|
http://www.cttecotech.ro/salon/postere/P131.png
|
0
|
132
|
Batrinescu G. s.a.
|
Instalatie pentru realizare de membrane polimerice
|
Invenţia se referă la o instalaţie pentru realizarea de membrane
polimerice, asimetrice, cum ar fi de exemplu, din polisulfonă,
polietersulfonă, policarbonat, poliamidă, policlorură de vinil,
polifosfazene, polifenilenoxid, poliviniliden-difluorură şi derivaţi
celulozici.
|
6
|
http://www.cttecotech.ro/salon/postere/P132.ppt
|
0
|
133
|
Gheorghe Bătînescu, Dana Garganciuc, Gabriela Roman, Liliana Pasăre, Ioana
Viezure, Daniela Raţă, Carol Lehr, Florica Radu, Marin Radu
|
Procedeu si instalatie de obtinere a membranelor tubulare
|
Invenţia se referă la un procedeu şi o
instalaţie de obţinere a membranelor în configuraţie tubulara,
cu grosime controlată, prin tehnica peliculizarii interne într-un suport
tubular ceramic poros a unei soluţii polimerice cu ajutorul unui piston.
|
6
|
http://www.cttecotech.ro/salon/postere/P133.png
|
0
|
134
|
Batrinescu Gh. s.a.
|
Instalatie pentru purificarea apei
|
Invenţia se referă la o instalaţie de purificare a apei folosită
pentru obţinerea apei potabile provenind din surse de suprafaţă sau
de adâncime în locuri izolate, prin filtrarea acesteia în trei trepte
distincte, urmată de purificarea microbiologică prin tratarea cu un agent de
dezinfecţie.
|
1
|
http://www.cttecotech.ro/salon/postere/P134.ppt
|
0
|
135
|
Beldie Cameluta, Anghel Ion, Sandu Ion, Aelenei Nicolae
|
Procedeu de obtinere a condensatoarelor cu tantal miniatura cu electrolit
solid
|
Inventia se refera la descrierea procedeului de obtinere a condensatoarelor
cu tantal miniatura cu electrolit solid
|
2
|
http://www.cttecotech.ro/salon/postere/P135.gif
|
0
|
136
|
Beldie Carmeluta, Sandu Ion, Calu Nicolae, Berdan Ioan, Taraboanta Irina,
Anghel Ioan
|
Procedeu de obtinere a electrolitului solid pe baza de MnO2 din
structura condensatoarelor cu anod de tantal sinterizata
|
Inventia se refera la un procedeu de obtinere a electrolitului solid pe baza
de MnO2 din structura condensatoarelor cu anod de tantal
sinterizata si constituie o inventie coplementara la inventia principala
Brevet RO nr. 99585.
|
6
|
http://www.cttecotech.ro/salon/postere/P136.png
|
0
|
137
|
Belousov V. s.a.
|
Siguranta pentru lacate
|
Siguranta pentru lacate cu un grad sporit de universalitate, formata dintr-o
piesa monobloc avand la baza un corp cilindric plat, cu un canal toroidal ce
se plaseaza in interiorul elementului „U” de inchidere a lacatului.
|
3
|
http://www.cttecotech.ro/salon/postere/P137.png
|
0
|
138
|
Belousov V. s.a.
|
Aparat de zbor cu motor bazat pe un acumulator de energie
|
Se utilizeaza un motor cu arc, armat la inceput, pentru ca forta centrifuga,
prin consecinta diminuarii sale, sa diminueze momentul de giratie,
restabilind numarul de rotatii si prelungind durata zborului.
|
15
|
http://www.cttecotech.ro/salon/postere/P138.png
|
0
|
139
|
Berzan V, Barladeanu A, Tirsu M., Lumer I.
|
Generator asincron cu excitatie capacitiva pentru instalatii eoliene de mica
putere
|
Generatorul contine doua infasurari pe stator conectate in schema de
autotransformator. Punctul de conexiune al infasurarilor constituie bornele
de iesire. Excitatie capacitiva.
|
3
|
http://www.cttecotech.ro/salon/postere/P139.png
|
0
|
140
|
Berzan Vladimir, Barladeanu Alexandru, Tarsu Mihai, Lumer Ina
|
Alternateur asyncrone a excitation capacitive
|
L´alternateur asynchrone a excitation capacitive a deux enroulements
triphases loger dans les scema de d´aitrasformateurs. Les noeuds des
connexions communes des enroulements principal supplementaire constituent la
sortie triphasee de l’alternateur asznchrone. La charge est brachee aux
noeuds de connexion electrique communs des enroulements principal et
supplementaire.
|
3
|
http://www.cttecotech.ro/salon/postere/P140.png
|
0
|
141
|
Besdolnyy M.
|
Besdolnyy's frontal harrow with MG348BBC
|
This is for entire working of soil before sowing, in the period of shoots,
after shoots of cultivated plants. Operative speed is up to 18 km per hour.
Productivity is up to 50 hectars per shift. Patent of Ukraine.
|
9
|
|
0
|
142
|
Besdolnyy M.
|
Besdolnyy's combined aggregate with MG348BBC for high - speed surface
treatment of soil for sowing
|
This proposition with is 4,2 – 5,6 m. Productivity is up to 50 hectars per
shift. Depth is 5-10-15 cm on all kinds of soils in any geographic latitude.
Patent of Ukraine.
|
9
|
|
0
|
143
|
Besdolnyy M.
|
Besdolnyy's mobile plant UPEMB - 5 for driving off essential oils out of
plant raw materials
|
This proposition with help of steam of small metal and power capacitance and
without electrical system. Oil output is 50% more. Patents of Ukraine,
Russian Federation, USA.
|
9
|
|
0
|
144
|
Besdolnyy M.
|
Besdolnyy’s harrow with MG348BBC for a plough with 6 variants of teeth fixing
|
This harrow aimed for being exploited on all kinds of soil in all the
geographic latitudes of the planct without alalogs. The explotation term is 8
years. It cleans itself, makes even the surface. Productivity – up to 16 he a
shift.
|
9
|
|
0
|
145
|
Besdolnyy M.
|
Besdolnyy’s positional cultivating harrow with MG348BBC
|
This is aggraved with cultivators having changeable angle of module attack.
Operating speed up to 15 km per hour. Width – 4,2 – 5,6 m.
|
9
|
|
0
|
146
|
Besdolnyy M.
|
Besdolnyy’s soil-cultivating aggregate with MG348BBC for cultivation of soil
|
This proposition with depth 5-16 cm, speed 18 km/h in any agro soil zone of
geographic latitude. Productivity is up to 60 hectare per shift.
|
9
|
|
0
|
147
|
Besdolnyy M.
|
|
This proposition with help of steam of small metal and power capacitance and
without electrical system. Oil output is 50% more.
|
9
|
|
0
|
148
|
Besdolnyy M.
|
The thresh-separating arrangement
|
This is alternative technical arrangement for threshing seeds of any crops.
The main peculiarity – extraction of seeds instead of their thrashing. It is
not powerconsuming, metal –consuming, it is very efficient and it does not
break seeds up.
|
9
|
|
0
|
149
|
Blaga Nicoleta, Ciulei Vlad, Petrache Stefan
|
Procedeu dinamic si instalatie de asperizare a foliei de aluminiu, folosita
la fabricarea condensatoarelor electrolitice
|
Prezenta inventie se refera la un procedeu dinamic, de prelucrare multipla a
foliei de aluminiu, la coeficientii de asperizare necesari fabricatiei
condensatoarelor electronice, pe o instalatie automata universala si
multipla.
|
3
|
http://www.cttecotech.ro/salon/postere/P149.ppt
|
0
|
150
|
Blaga Nicoleta, Manea Mircea, Baluta Elena, Tudosie Elena
|
Pasta electroconductiva de joasa rezistivitate
|
Inventia se refera la o pasta electroconductiva de joasa rezistivitate cu
întarire la temperaturi pozitive ; cu largi aplicatii în domeniul
electronicii, electrotehnicii si mecanicii fine.
|
3
|
http://www.cttecotech.ro/salon/postere/P150.ppt
|
0
|
151
|
Blaga Nicoleta, Radu Marin
|
Procedeu si echipament pentru fermentatia intensive a berii cu ultrasunete
|
Inventia se refera la un procedeu si la un echipament pentru fermentatie
intensiva a berii, destinate unui flux tehnologic, specific producerii
fermentatiei berii
|
7
|
http://www.cttecotech.ro/salon/postere/P151.ppt
|
0
|
152
|
Blaga Nicoleta, Staicovici Mihai, Blaga Iului Ion, Voda Mihai, Ghiordanescu
Victor, Trutia Athanasie, Ionasek Theodor
|
Element absorbant sub forma de placa pentru captarea energiei solare si
procedeu de obtinere a acestuia
|
Element absorbant sub forma de placa pentru captarea energiei solare, urmat
dintr-un suport acoperit cu straturi absorbante si reflectante
|
1
|
http://www.cttecotech.ro/salon/postere/P152.ppt
|
0
|
153
|
Bogdanov Vladimir, Vikhlyantsev Petr, Simonov Mikhail
|
Protectia produselor, articolelor si documentelor. Procedee si sisteme
|
Purpose of the inventions is creation of high reliable
methods and systems for control and registration of manufacture and
circulation of goods, ware and documents, enabled to reveal counterfeit
goods, ware and documents.
|
20
|
http://www.cttecotech.ro/salon/postere/P153.png
|
0
|
154
|
Boghian Leonard-Stefan
|
Ambreiaj mecanic automat
|
The clutch shaft has two threaded parts of different
pitches. The clutch carcass moves axialy along the shaft part of longer pitch
and a threaded clutch disc moves axialy along the shaft part of shorter
pitch. The clutch carcass transmits the rotational motion of the motor to the
gear box using the threaded disc and the clutch shaft.
|
3
|
http://www.cttecotech.ro/salon/postere/P154.png
|
0
|
155
|
Bostan Ion, Dulgheru Valeriu, Bostan Viorel, Sochireanu Anatol, Ciobanu Oleg,
Ciobanu Radu, Dicusara Ion, Ciuperca Radu
|
Floatable Micro-hydropower Station with Adjustable Hydrodynamic Blades
|
Micro-hydropower station provides kinetic energy conversion of river water
into mechanical or electrical energy without building barrages. Increased
efficiency is provided by blades aerodynamic profile and their optimum
position for efficient conversion of water kinetic energy.
|
1
|
http://www.cttecotech.ro/salon/postere/P155.png
|
0
|
156
|
Bostan Ion, Dulgheru Valeriu, Ciuperca Radu
|
Wind Unit with Helical Rotor
|
Small wind speeds which are characteristic for the Republic of Moldova do not
allow efficient utilization of the classical wind working elements. To
increase the conversion efficiency of wind energy at V=2...5 m/s speeds a new
wind working element has been designed. It has the shape of helical turbine
with aerodynamic profile of blades in normal section. The increase of the
coefficient of wind energy utilization is provided by additional injection of
air-mass.
|
1
|
http://www.cttecotech.ro/salon/postere/P156.png
|
0
|
157
|
Bostan Ion, Dulgheru Valeriu, Ciuperca Radu
|
Submersible Drive Mechanisms for Extraction Complex of Ferro-manganese
Concretions from the Planetary Ocean bottom
|
The ferro-manganese concretion concentration from the Planetary Ocean bottom
lying at the depth of 5000-7000 m constitutes 15…75 kg/m2.
The extraction problem of these deposits can be efficiently solved through
the usage of the precessional transmissions in precessional drive mechanisms.
Increased bearing capacity and reliability, assured by high multiplicity of
the gearing, very large kinematical possibilities (i = 8…3600) have
favoured the elaboration of a large range of submersible driving mechanisms
for the extraction complex.
|
3
|
http://www.cttecotech.ro/salon/postere/P157.png
|
0
|
158
|
Bostan Ion, Dulgheru Valeriu, Dicusara Ion
|
Precessional Gearing and Execution Method
|
The elaborated precessional gearing is a multi-couple gearing (up to 100% of
teeth pairs are gearing simultaneously), that ensures increased bearing
capacity and kinematic accuracy. The elaborated method for the fabrication of
precessional gearing ensures efficient processing and accuracy of wheels with
non-standard convex-concave profile of teeth and contains Know-How elements.
|
3
|
http://www.cttecotech.ro/salon/postere/P158.png
|
0
|
159
|
Bostan Ion, Dulgheru Valeriu, Sochireanu Anatol, Dicusara Ion, Bodnariuc Ion.
|
Planetary Precessional Transmissions
|
Kinematical planetary precessional transmissions that were developed have a
series of advantages including: reduced mass and size, supplemented by
increased carrying capacity and large kinematical possibilities (i=10...5000
in a single level; simple construction, including only 4 basic elements;
simple technology for the manufacture of toothed wheels, based on the use of
metal powders and plastics; reduced cost. These features enable the increased
use of kinematical planetary precessional transmissions in various fields:
fine mechanics, robotics, avionics, automobiles.
|
3
|
http://www.cttecotech.ro/salon/postere/P159.png
|
0
|
160
|
Bostan Ion, Dulgheru Valeriu, Sochireanu Anatol, Trifan Nicolae
|
Precessional reducer motor
|
The cosmic flying devices require high positioning accuracy drive mechanisms
that run efficiently in vacuum conditions, reduced size and weight
dimensions. The high multiplicity of the precessional gearing assures high
kinematical accuracy. This factor has allowed the elaboration of a range of
the electromechanical modules for cosmic flying devices that demand high
positioning accuracy.
|
3
|
http://www.cttecotech.ro/salon/postere/P160.png
|
0
|
161
|
Bostan Ion, Dulgheru Valeriu, Sochireanu Anatol, Vengher Dumitru, Ciobanu
Radu
|
Precessional reducer
|
Accumulation of the metallic splinters in big quantities creates problems at
the metal processing enterprises. Therefore, there has been elaborated
processing equipment for metallic scrapwhich contains drive mechanisms. The
elaborated precessional drive mechanisms possess increased reliability,
protection elements against overstressing, output
|
3
|
http://www.cttecotech.ro/salon/postere/P161.png
|
0
|
162
|
Bounegru T. s.a.
|
Procedeu de neutralizare a deseurilor vinicole ce contin albastru de Prusia
|
The present invention concerns to ways of neutralization
wastes of winemaking containing Prussian blue, formed in result
unmetallization of faults. The given invention provides realization of
preliminary neutralization contained in semi-fluid wastes of the rests of
acids by materials containing calcium carbonate, concentration these wastes,
addition to received viscous weight of a firm oxidizer, hashing of received
weight, her(it) baking, pounding and calcination at temperature 250... 300 OC
during 10... 15 mines in closed installations, which provides absorption of
the allocated previously cooled gases by a solution ferric sulfate (II). The
firm rests after calcination are not toxic and they can be sent on a dump
household or building wastes.
|
6
|
http://www.cttecotech.ro/salon/postere/P162.png
|
0
|
163
|
Brad Ion, Speteanu Rozalia, Cismaru Stanca, Petrescu Mioara
|
Crema de zi
|
Inventia se refera la o crema de zi utilizata pentru ingrijirea tenului.
|
12
|
http://www.cttecotech.ro/salon/postere/P163.ppt
|
0
|
164
|
Brad Ion, Speteanu Rozalia, Petrescu Mioara, Cismaru Sanda
|
Emulsie demachianta
|
Inventia se refera la o emulsie demachianta, utilizata in cosmetica.
|
12
|
http://www.cttecotech.ro/salon/postere/P164.ppt
|
0
|
165
|
Brad Ion, Zamfirescu Sanda, Motoroi Marilena, Popescu Veronica
|
Comprimate cu actiune reconfortanta
|
Inventia se refera la comprimate cu actiune reconfortanta, pe baza de produse
naturale.
|
12
|
http://www.cttecotech.ro/salon/postere/P165.ppt
|
0
|
166
|
Braharu Emil
|
Bac traversare individuala
|
Agreement ship or ferry for crossing the rivers and lakes.
|
1
|
http://www.cttecotech.ro/salon/postere/P166.png
|
0
|
167
|
Braharu Emil
|
Condensor acvatic autonom
|
Machine for making a drinking water from sea water.
|
1
|
http://www.cttecotech.ro/salon/postere/P167.png
|
0
|
168
|
Braharu Emil
|
Hidrobicicleta amfibie
|
Agreement ship and nautical travel who use for the
propulsion ecological energy.
|
1
|
http://www.cttecotech.ro/salon/postere/P168.png
|
0
|
169
|
Braharu Emil
|
Momeala artificiala selectiva
|
Object used at comercial fishing at long lain, securing
the ecological fishing.
|
1
|
http://www.cttecotech.ro/salon/postere/P169.png
|
0
|
170
|
Braharu Emil
|
Prelevator probe piscicole
|
Portable machine for making the fishing very simple.
|
1
|
http://www.cttecotech.ro/salon/postere/P170.png
|
0
|
171
|
Braharu Emil
|
Prelevator probe subacvatice
|
Machine for drawing the proofs of sea water and bentos
with the object of researching.
|
1
|
http://www.cttecotech.ro/salon/postere/P171.png
|
0
|
172
|
Braharu Emil
|
Trimaran motovelier
|
Making a agreement ship capable to rezist maritime
navigation solicitations.
|
1
|
http://www.cttecotech.ro/salon/postere/P172.png
|
0
|
173
|
Braharu Emil
|
Complet vibronav
|
Mechanized removing of ships oxides with an equipment;
this equipment is in endowment of ships.
|
1
|
http://www.cttecotech.ro/salon/postere/P173.png
|
0
|
174
|
Braharu Emil
|
Placare interioara rezervoare metalice
|
Improve drink water quality, eliminate corrosion from fuel
tank using cheap unconventional technologies
|
1
|
http://www.cttecotech.ro/salon/postere/P174.png
|
0
|
175
|
Braharu Emil
|
Panou fonoabsorbant
|
Inventia consta in constructia unui panou multistrat din poliester armat cu
fibra de sticla avand in interior spuma poliuretanica ce incastreaza sticle
PET, iar la exterior granule si orificii pentru absorbtia zgomotului.
Noiseproof multistrat composite panel.
|
1
|
http://www.cttecotech.ro/salon/postere/P175.png
|
0
|
176
|
Braharu Emil
|
Procedeu de obtinere a unui material compozit
|
Manufacturing of pieces using composite material from PET as glue ( eg: sewer
lid), for an ecological environment.
|
1
|
|
0
|
177
|
Braharu Emil
|
Ecran de protectie radiatii electromagnetice
|
Protective multistrat composite surface for civil and military
objectives.
|
1
|
http://www.cttecotech.ro/salon/postere/P177.png
|
0
|
178
|
Braharu Emil
|
Procedeu si utilaj pentru fabricatia materialelor de constructii din deseuri
celulozice
|
Manufacturing of light building materials, fireproof, non
biodegradation, with good mechanical resistance.
|
1
|
http://www.cttecotech.ro/salon/postere/P178.png
|
0
|
179
|
Braharu Emil Pintilei Mihai
|
Material izolant hidrofug
|
Waterproof material containing powder from used tyres -
ecological environment.
|
1
|
http://www.cttecotech.ro/salon/postere/P179.png
|
0
|
180
|
Braharu Emil Pintilei Mihai
|
Invelis asfaltic antiderapant
|
Asphaltic cover containing powder and granules from used tyres – ecological
environment.
|
1
|
|
0
|
181
|
Braharu Emil
|
Utilaj si tehnologie reconditionare roti
|
Installation for reconditioner of mechanical wheels at
small prices.
|
3
|
http://www.cttecotech.ro/salon/postere/P181.png
|
0
|
182
|
Braharu Emil
|
Procedeu sudura aluminotermica
|
A wilding method for pipes and metal bars without using
alternative energy.
|
3
|
http://www.cttecotech.ro/salon/postere/P182.png
|
0
|
183
|
Braharu Emil
|
Presa compactoare cu explozie
|
Press for small concrete objects using explosion energy.
|
3
|
http://www.cttecotech.ro/salon/postere/P183.png
|
0
|
184
|
Braharu Emil
|
Perforator autonom cu explozie
|
Autonomous rock drill using methane gas – air .
|
3
|
http://www.cttecotech.ro/salon/postere/P184.png
|
0
|
185
|
Braharu Emil
|
Instalatie de prelucrare cu jet de fluid
|
Cutting waterjet instalation using explosion energy.
|
3
|
http://www.cttecotech.ro/salon/postere/P185.png
|
0
|
186
|
Braharu Emil
|
Procedeu si utilaj pentru fabricatia bordurilor din beton
|
Casting simple finished concrete dashboard, in mechanized
system, directly on final position.
|
3
|
http://www.cttecotech.ro/salon/postere/P186.png
|
0
|
187
|
Braharu Emil
|
Pavela decorativa prefabricata
|
Protected pave, unlimited number of colours, climateric
factors resistance.
|
4
|
http://www.cttecotech.ro/salon/postere/P187.png
|
0
|
188
|
Braharu Emil
|
Tehnologie de glazurare a pieselor din beton si ceramica
|
It offers at pieces of reinforced concrete and ceramics resistance at
climateric factors and a beautiful look.
|
4
|
http://www.cttecotech.ro/salon/postere/P188.png
|
0
|
189
|
Braharu Emil, Oroian Bogdan
|
Arteziana decorativa
|
Spring–well with sustentated plasma globe.
|
4
|
http://www.cttecotech.ro/salon/postere/P189.png
|
0
|
190
|
Braharu Emil
|
Pavela decorativa luminoasa
|
Decorative pave with special effects, using non-conventional energy.
|
4
|
http://www.cttecotech.ro/salon/postere/P190.png
|
0
|
191
|
Braharu Emil
|
Metoda de compactare a betonului
|
Concrete compacting in metallic closed mould using explosion energy.
|
5
|
http://www.cttecotech.ro/salon/postere/P191.png
|
0
|
192
|
Braharu Emil Pintilei Mihai
|
Vesta individuala semnalizata optic
|
Individual street waistcoat to eliminate road accidents.
|
15
|
http://www.cttecotech.ro/salon/postere/P192.png
|
0
|
193
|
Braharu Emil Pintilei Mihai
|
Paleta semnalizare optica
|
Lighting stick to eliminate road accidents.
|
15
|
http://www.cttecotech.ro/salon/postere/P193.png
|
0
|
194
|
Braharu Emil Pintilei Mihai
|
Marcaje rutiere prefabricate, independente energetic
|
Obtaining of permanent lighting marks with no need for periodical painting,
with self recharge.
|
15
|
http://www.cttecotech.ro/salon/postere/P194.png
|
0
|
195
|
Brekhov A. N., S.L. Elyseev, M.I. Kalynin, V.I. Pakhaliyk, G.D. Olynichenko,
A.M. Polyakov, V.L. Kharchin
|
Package of a patents for inventions in the field of endoprothesis a backbone
and large joints of a person
|
Inventions concern to area of traumatology, orthopedy, vertebrology and
artrology and represent new designs of implants for functional restoration of
patients with diseases of a backbone and large joints Features of designs
allow to increase implants service life, to lower terms of patients
rehabilitation and to increase quality of a life due to the fullest restoration
of joints and a backbone functions. Patents for inventions are given out by
the 11 State patents of the Ukraine and State patents of the Russian
Federation.
|
11
|
|
0
|
196
|
Bucur Doru Cristian
|
Dispozitiv pentru trasat si desenat figuri geometrice regulate
|
Cu acest dispozitiv se pot trasa si desena triunghiuri, patrate, hexagoane si
octogoane, la dimensiuni ale cercului circumscris de la 3 mm pana la 60 mm
sau chiar mai mare, cu o reglare continua a dimensiunilor cu un pas minim de
0,5 mm.
|
16
|
http://www.cttecotech.ro/salon/postere/P196.png
|
0
|
197
|
Buzaianu Aurelian, Corban Mircea, Ciupitu Iulian
|
Materiale tribologice pentru sistemele de franare cu discuri
|
Inventia se refera la materialele din cupla de frecare, destinate realizarii
sectoarelor de frictiune care echipeaza in principal sistemele de franare de
tip rotor-stator ale aeronavelor. Sunt utilizabile pana la temperaturi de
1000°C si. pot fi aplicate si autovehiculelor grele si speciale cum sunt:
autoblindatele, transportoarele etc.
|
3
|
http://www.cttecotech.ro/salon/postere/P197.png
|
3
|
198
|
Buzaianu Aurelian, Petrescu Maria, Roman Ioan
|
Benzi pe baza de aliaje de magneziu destinate realizarii de anozi pentru pile
galvanice
|
Inventia se refera la benzi din aliaje complexe cu baza magneziu obtinute
prin solidificare ultrarapida, destinate realizarii de anozi pentru pile
galvanice.Structura si morfologia benzilor de aliaje de magneziu obtinute
prin tehnologii neconventionale de solidificare ultrarapida elimina
inconvenientele de neomogenitate structurala. Tehnologia se poate adapta
diverselor tipuri de aliaje de magneziu.Benzile realizate conform inventiei
au o structura nanocristalina sau amorfa, grosimi cuprinse intre 35-70 µm si
potentiale mixte de electrod cuprinse intre -1560 si -1700 mV e.s.c.,
potential dupa 2 min de la contactul cu electrolitul care poate fi apa de
mare.
|
3
|
http://www.cttecotech.ro/salon/postere/P198.png
|
3
|
199
|
Buzaianu Aurelian, Roman Ioan
|
Pila galvanica extraplata activabila cu apa de mare
|
Pila galvanica este de tip extraplat activabila cu apa de mare si este
formata dintr-o carcasa protectoare in care este plasat un ansamblu anod,
catod si un separator electrochimic, ambalat intr-o plasa electroizolanta si
de protectie mecanica. Pila se caracterizata prin aceea ca anodul este
construit din benzi din aliaje de magneziu cu structura nanocristalina sau
amorfa, sunt dispuse stratificat si au grosimea mai mica de 100 µm, cu o
suprafata specifica de peste 0,50 dm2/g. Pila prezinta un timp de
activare mai mic de 30 s in apa de mare, are o grosime redusa si datorita
tehnologiei de obtinere a anodului este mai ieftina comparativ cu pilele
existente.
|
2
|
http://www.cttecotech.ro/salon/postere/P199.png
|
2
|
200
|
Calistru Constantin, Petrescu Stelian, Balasanian Ion, Sandu Ion
|
Precedeu de obtinere a singenitului
|
Inventia se refera la elaborarea unui procedeu de obtinere
a singenitului
|
6
|
http://www.cttecotech.ro/salon/postere/P200.gif
|
0
|
201
|
Calu Nicolae, Balanescu Elena, Sandu Ion, Berdan Ioan, Luputiu Mircea, Popa
Liviu, Birsanescu Adriana, Miloi Alexandru
|
Procedeu de obtinere a dioxidului de mangan activ
|
Inventia se refera la stabilirea unui procedeu de obtinere
a dioxidului de mangan activ
|
6
|
http://www.cttecotech.ro/salon/postere/P201.gif
|
0
|
202
|
Calu Nicolae, Birsanescu Adriana, Sandu Ion, Berdan Ion, Luputiu Mircea, Popa
Liviu
|
Procedeu de recuperare a manganului, sub forma de dioxid de mangan activ, din
elemente galvanice tip Leclanche uzate
|
Brevetul se refera la elaborarea unui procedeu de recuperare a manganului,
sub forma de dioxid de mangan activ. Recuperarea s-a realizat din elemente
galvanice tip Leclanche uzate.
|
6
|
http://www.cttecotech.ro/salon/postere/P202.gif
|
0
|
203
|
Calu Nicolae, Miloi Alexandru Iosif, Popa Liviu Mihai Eugen, Luputiu Mircea
Gheorghe, Berdan Ioan, Sandu Ion, Luputiu Rodica
|
Procedeu de recuperare a zincului din elementele galvanice
|
Inventia stabileste un procedeu original de recuperare a
zincului din elemente galvanice
|
6
|
http://www.cttecotech.ro/salon/postere/P203.gif
|
0
|
204
|
Calu Nicolae, Sandu Ion, Bangoura Morlaye, Calu Mihai
|
Procedeu de recuperare a principalelor componente din slamul rosu rezultat la
fabricarea aluminei
|
Inventia se refera la un procedeu de recuperare a principalelor componente
din slamul rosu. Acesta se obtine la fabricarea industriala a aluminei.
|
6
|
http://www.cttecotech.ro/salon/postere/P204.gif
|
0
|
205
|
Calu Nicolae, Sandu Ion, Ganea Constantin, Gilea Anica, Berdan Ioan, Saviuc
Eugenia, Cecal Alexandru, Vicol Olga, Bosnea Lucia, Rano Adina, Lupu
Virginel, Iancu Gabi, Balta Mihaela, Postolache Marilena
|
Procedeu de obtinere a unor lubrifianti pe baza de suspensii de grafit
coloidal sau semicoloidal in mediu apos
|
Brevetul pune la punct un procedeu de obtinere a unor
lubrifianti pe baza de suspensii de grafit coloidal sau semicoloidal in mediu
apos
|
6
|
http://www.cttecotech.ro/salon/postere/P205.gif
|
0
|
206
|
Calu Nicolae, Sandu Ion, Rau Svetlana, Anghel Ioan, Cecal Alexandru, Berdan
Ioan, Vicol Olga, Saviuc Eugenia, Bosnea Lucia
|
Procedeu de obtinere a primului strat catodic in structura condensatoarelor
cu electrolit solid, cu tantal
|
Inventia se refera la un procedeu de obtinere a primului
strat catodic in structura condensatoarelor cu electrolit solid, cu tantal
|
6
|
http://www.cttecotech.ro/salon/postere/P206.gif
|
0
|
207
|
Caraus V.
|
Compozitie de ingrediente pentru obtinerea balsamului curativo-profilactic
Fat-Frumos
|
Se obtin compozitii de ingrediente pentru fabricarea balsamului
curativo-profilactic Fat-Frumos, aplicat in industria alimentara si medicina
profilactica.
|
12
|
http://www.cttecotech.ro/salon/postere/P207.ppt
|
0
|
208
|
Caraus V. s.a.
|
Compozitii de ingrediente pentru obtinerea balsamurilor curativo-profilactice
|
Inventia se refera la compozitii de ingrediente pentru obtinerea balsamurilor
curativo-profilactice
|
12
|
http://www.cttecotech.ro/salon/postere/P208.ppt
|
0
|
209
|
Catalan Ovidiu
|
Sistem de transformare a miscarii de translatie in miscare de rotatie
Systheme de transformation du mouvement de translation en mouvement de
rotation
|
Le but d’invention consiste en la transformation du
mouvement de translation en mouvemnet de rotation
|
3
|
http://www.cttecotech.ro/salon/postere/P209.ppt
|
0
|
210
|
Cecal Alexandru, Moga Mircea, Cretu Viorel, Calu Nicolae, Berdan Ioan, Sadu
Ion
|
Procedeu de regenerare a ipsosului uzat
|
Inventia se refera la un procedeu de regenerare a
ipsosului uzat
|
6
|
http://www.cttecotech.ro/salon/postere/P210.gif
|
0
|
211
|
Cecal Alexandru, Morar Viorel, Gyorgy Victor, Calu Nicolea, Enculescu Ioan,
Vicol Olga Saviuc Eugenia, Bosnea Lucia, Berdan Ion, Sandu Ion, Rang Adina
|
Procedeu pentru recuperarea ionilor de calciu din apele reziduale rezultate
de la fabricarea oxiclorurii de cupru
|
Inventia se refera la elaborarea unui procedeu pentru
recuperarea ionilor de calciu din apele reziduale rezultate de la fabricarea
oxiclorurii de cupru
|
6
|
http://www.cttecotech.ro/salon/postere/P211.gif
|
0
|
212
|
Cerempei L. s.a.
|
Screening metode salivare in diagnosticul afectiunilor cronice
gastro-duodenale la copii
|
Esenta inventiilor consta în diagnosticul starii metabolismului lipidic si al
functiei biomembranelor celulare la copiii cu afectiuni gastroduodenale
cronice pe baza determinarii fosfolipidelor si a colesterolului în saliva,
precum si în efectuarea diagnosticului functiei pancreasului , prin
determinarea nivelului tripsinei si inhibitorilor ei (alfa-1 antitripsina,
alfa-2 macroglobulina) în saliva prelevata de la pacienti.
|
11
|
http://www.cttecotech.ro/salon/postere/P212.png
|
0
|
213
|
Chintea P., Balasova N., Mamedov M., Mascenco N., Spânu C., Jacota A., Svet
S.
|
Procedeu de tratare a semintelor de ardei
|
Procedeul include imunizarea semintelor de ardei înainte de semanat în
solutie apoasa de glicozida 3-O-[ß-D-glucopiranozil(1›2)]-[ß-D-
glucopiranozil(1›3)]-[ß-D-glucopiranozil(1›4)]-ß-D-glucopiranozida(25R)-5?,furostan-2?,3ß,22?,26-tetraol]-26-O-ß-D-glucopiranozida
de 0,0001% timp de 12 ore
|
9
|
http://www.cttecotech.ro/salon/postere/P213.gif
|
0
|
214
|
Chintea P., Jacota A., Svet S., Serban E.
|
Imunizator chimic al plantelor de tutun
|
Tratarea semintelor de tutun înainte de semanat cu bioreglatori naturali,
ceea ce conduce la sporirea germinatiei semintelor de tutun si rezistentei
plantelor la factori abiotici si biotici nefavorabili.
|
9
|
http://www.cttecotech.ro/salon/postere/P214.gif
|
0
|
215
|
Chintea P., Mascenco N., Balasova N., Gulchin V., Spânu C., Scutelnic R.
|
Procedeu de obtinere a glicozidelor furostanolice
|
Semintele de Physalis sunt înmuiate în solutie de HCl, dupa care materia
prima se spala cu apa pâna la reactia neutra si se trateaza cu metanol.
Extractul se evaporeaza, precipitatul se spala cu acetona si se usuca
|
6
|
http://www.cttecotech.ro/salon/postere/P215.gif
|
0
|
216
|
Chintea P., Svet S., Calchei E.
|
Procedeu de cultivare a tutunului
|
Procedeul de cultivare a tutunului include tratarea semintelor înainte de
semanat, semanatul si tratarea extraradiculara a rasadului în faza de
urechiuse cu o solutie apoasa de glicozida – nicotianozida F.
|
9
|
http://www.cttecotech.ro/salon/postere/P216.gif
|
0
|
217
|
Chirilov Alexandru
|
Procedeu de sporire a rezistentei plantelor de vita de vie la seceta
|
There is proposed a method, which ensures optimization and increase of the
grapes hydric statute stability including under conditions of the humidity
insufficiency, drought resistance on 15-20% by application of biologically
active substances of natural origin from the class of steroid glycosides –
Mestim preparation that leads to obtaining of the yields higher on 10-25%
with superior quality indexes of grapes. Preparation is ecologic pure, is
applied in small quantities, doesn’t require additional expenses because it
could be used at once with the plants treatment against diseases and pests.
|
9
|
http://www.cttecotech.ro/salon/postere/P217.png
|
0
|
218
|
Cincilei Angela, Tolocichina Svetlana, Dvornikova Tatiana, Siretanu Ludmila
|
“Tulpini noi de microorganisme – destructoare ale pesticidelor”.
|
Indigenous soil fungi Asp.alliaceus CNM-FA-01 and
Penicillium funiculosum CNM- FP-01, isolated and analyzed by the researchers,
are using different kind of herbicides as an only source of carbon and
energy, assuring the complete degradation of the pollutants. The efficient
strains of microscopic fungi are actively and simultaneously degrading the
herbicides clorsulfuron, fluazifop-P-butyl, haloxyfop-etoxiethyl,
diclofop-methyl and can be used as active principes in biotechnological
schemes of decontamination of agricultural lands from persistent pesticides
and asuring the ecological purity of agroproducts.
|
1
|
http://www.cttecotech.ro/salon/postere/P218.png
|
0
|
219
|
Ciobanu Octavian
|
Metoda si instalatie de detensionare automata prin vibrare a corpurilor
metalice
|
Inventia se refera la o metoda si o instalatie pentru detensionarea prin
vibrare a corpurilor metalice obtinute prin prelucrari la cald sau la rece.
Instalatia utilizeaza un vibrator mechanic cu excentric antrenat de un motor
cu turatie reglabila. Metoda prevede vibrarea corpurilor metalice pentru un
timp determinat si inregistrarea frecventelor de rezonanta prin urmarirea
indicatiilor unui ampermetru ti ale unui vibrometru. Impulsurile din curentul
motorului, care apar la atingerea unei frecvente de rezonanta, sunt utilizate
la automatizarea întregului process de detensionare. Procesul de detensionare
poate fi condus numai prin doua butoane de comanda si nu necesita urmarirea
permanenta a tratamentului
|
3
|
http://www.cttecotech.ro/salon/postere/P219.ppt
|
0
|
220
|
Ciobotea Daniel, Sandu Ion, Tapuc Mihaela, Vitalie Victorin Danciu, Tapuc
Grigore, Tesu Cristinel
|
Procedeu de obtinere a tamâiei
|
Inventia se refera la un procedeu de obtinere a tamâiei, utilizata la
procesul liturgic.
|
6
|
http://www.cttecotech.ro/salon/postere/P220.png
|
0
|
221
|
Ciuhrii Mircea
|
Biological preparation for lysing moles, warts, polypi, keloids, carcinomas
and other cutaneous formations, process for obtaining and using the same
|
The invention relates to a biological preparation for lysing moles, warts,
polypi, keloids, carcinomas and other cutaneous formations, to the process
for obtaining and using the same. The biological preparation consists of 51.7...52%
specific protein comprising 10% of biologically active substance based on
aminoacids: Gly, Asp, Ley, Pir, Fen, Liz, together with 25% lanolin, 25%
glycerine, 25% powder milk, 10% nut extract, 0.12% nipagin, 0.08% nipasol and
4.8% bidistilled water, the percentage being expressed by weight. The process
for obtaining the preparation consists in the fact that the Lymantria dispar
L. pupae, which are collected from the infested forests, are well desinfected
with detergent, alcohol and ultraviolet rays, then are milled until there is
obtained a homogeneous light-grey mass, which is lyophilized at the
temperature of -130o...-150o C, for 45...48 h, or is atomized at the temperatures of
120o...130o C, at the
input, and 85o...90o C, at the
output, then there are added in the following order: glycerine, lanolin, fat
milk, nut extract, nipagin, nipasol, biologically active substance and
bidistilled water, which are mixed by means of a mixer until a homogeneous
mass is obtained
|
11
|
http://www.cttecotech.ro/salon/postere/P221.png
|
0
|
222
|
Ciuhrii Mircea
|
Biologically active substance, process for preparing the same, utilization of
the biologically active substance
|
The invention relates to a biologically active substance yo a process for
preparing the same, to the utilization of said biologically active substance.
According to the invention, the biologically active substance contains : 4.84
.... 7.97 % Glu; 4.10 ... 8.45 % Fen; 3. 76 ... 5. 23 % Asp; 2.04 ... 4.44 %
Liz; 1.50 ... 2.79 % Tre; 2.72 ... 3.10 % Pro, 1.65 ... 3.10 % Ala; 1.80 ...
2.54 % Val; 1.37 ... 2.59 % Izo; 1.41 ... 3.04 % Pir; 1.91 ... 3. 61 % Arg;
0.83 ...1.17 % His, the percents being expressed by weight. According to the invention,
the process consists in collecting eggs and pupae of Lymantria dispar, larvae
of Leptinotarsa decembriata and adults of Melolonta melolonta, which are
sterilized, ground in an electric mill at a speed ranging from 2,500 - 5, 000
rpm, until obtaining a light grey homogeneuos mass, filtering said mass by
means of a cloth whose orifices range from 200 to 250 miu., isolating the
scraps of the tissue, filtering by means of a vacuum filter, until obtaining
a light grey suspension, lyophilizing and atomizing the some until a powder
is obtained. The biologically active substance is used for preparing a
medicament against hepatic infections.
|
11
|
http://www.cttecotech.ro/salon/postere/P222.png
|
0
|
223
|
Ciuhrii Mircea
|
Biologically active substance, process for preparing the same and
pharmaceutical composition
|
The invention relates to a biologically active substance, to a process for
preparing said substance, to a pharmaceutical composition for treating
herpetic infections and to the utilization of said biologically active
substance.
|
11
|
http://www.cttecotech.ro/salon/postere/P223.png
|
0
|
224
|
Ciurescu Toma, Chimon Capatu, Sandu Ion, Marinescu Valeriu, Ilies Mihai Dan,
Imparatu Dumitru
|
Dispozitiv de masurare a sagetilor la constructii, elemente de constructii si
lucrari de arta
|
Inventia se refera la un dispozitiv de masurare a sagetilor la constructii,
elemente de constructii si lucrari de arta
|
3
|
http://www.cttecotech.ro/salon/postere/P224.png
|
0
|
225
|
Ciurescu Toma, Ciobanu Octavian, Strat Lucian, Sandu Ion
|
Fleximetru electromecanic
|
Inventia se refera la un procedeu de obtinere a unui Fleximetru
electromecanic
|
3
|
http://www.cttecotech.ro/salon/postere/P225.gif
|
0
|
226
|
Ciurescu Toma, Groll Liviu, Ciobanu Octavian, Strat Lucian, Sandu Ion
|
Inclinometru inductiv
|
Inventia se refera la un procedeu de obtinere a unui Inclinometru inductiv
|
3
|
http://www.cttecotech.ro/salon/postere/P226.png
|
0
|
227
|
Ciurescu Toma, Sandu Ion, Chimon Capatu
|
Baterie hibrida reversibila din pile metal-aer
|
Inventia se refera la un procedeu de obtinere a unei baterii hibride
reversibile din pile metal-aer
|
6
|
http://www.cttecotech.ro/salon/postere/P227.gif
|
0
|
228
|
Ciurescu Toma, Tanislav Stefan, Vetianu Emil, Riza Alexandru, Ciobanu
Octavian, Sandu Ion
|
Instalatie pentru masurarea si inregistrarea parametrilor unei cai rutiere
|
Inventia se refera la un procedeu de obtinere a unei instalatii pentru
masurarea si inregistrarea parametrilor unei cai rutiere
|
3
|
http://www.cttecotech.ro/salon/postere/P228.png
|
0
|
229
|
Cojocaru Vasile, Sandu Ion, Stanciu Sergiu, Coman Gheorghe, Calu Nicolae,
Lazar Aurelian
|
Procedeu de obtinere a fontelor cu proprietati fizico-chimice superioare
|
Inventia se refera la un procedeu de obtinere a unui procedeu de obtinere a
fontelor cu proprietati fiyico/chimice superioare
|
6
|
http://www.cttecotech.ro/salon/postere/P229.png
|
0
|
230
|
Constantinov Boris; Pasecinic Teodosie; Bocan Valentina
|
Metode operative ale controlului ecologic în sistem tridimensional
|
Providing of cell-capture with two
mobile independent optical systems, which excludes the
optical aberrations at the research of 3D gradient of dynamic of influence:
active media, mass transportation of biosupliment, bioreactions on sample medium.
The optical system is provided supplementary by cell-capture of aggressive
media, surface active substances from environmental medium or by the cell of
anticipated deposited active biosupplements and active pulverizing substances
in the weak and strong potential field. The supplemental providing of
cell-capture with two mobile independent optical systems assures the research
of influence of dynamical gradient in the real time scale of aggressive
substances (aerosol) naturally captured from atmosphere or active media, mass
transportation of biosuppliments, bioreactions on the sample of
transportation of biosupplements, bioreactions on the sample medium. The
installation is provided by IR and UV radiator.
|
1
|
http://www.cttecotech.ro/salon/postere/P230.png
|
0
|
231
|
L. Coretchi, E. Emnova, I. Bahnarel, C. Spânu, N. Cechirlan
|
Agent de degradare a radionuclizlor
|
Inventia se refera la radioprotectie si biotehnologie si în special la
metodele de degradare a radionuclizilor (compusilor cobaltului radioactiv)
prin utilizarea tulpinii demicroorganisme Micor X izolate din sol..Rezultatul
consta în eficacitatea mai sporita a tulpinei Micor X de a degrada C0 (PO4)
2 x 8 H20 în comparatie cu prototipul, exprimata prin
formarea zonei de salubrizare în jurul coloniei, care constituie 112,5-144,8
% fata de analog. Tulpina Micor X se valorifica prin introducerea ei în solul
contaminat cu radionuclizi întru accelerarea degradarii lor.Agentul biologic
propus pentru degradarea radionuclidelor prezinta interes pentru utilizare în
zonele afectate, inclusiv a accidentului de la Cernobîl.
|
1
|
http://www.cttecotech.ro/salon/postere/P231.png
|
0
|
232
|
Craciun S., M.Revenco, A.Craciun, S.Dmitriev
|
Catalizator pentru purificarea complexa a emisiilor de gaze
|
The invention relates to the catalysts used for separation
of harmful components of the exhaust and process gases. Summary of the
invention consists in that the catalyst contains copper oxide, manganese
dioxide, amorphous molybdenum, vanadium and .phosphor oxides, deposited onto
the active aluminum oxide
|
1
|
http://www.cttecotech.ro/salon/postere/P232.png
|
0
|
233
|
Cristea Dumitru, Godeanu Marioara, Tinca Ecaterina, Constantin Ion,
Dumitrescu Gheorghe
|
Acoperis de climatizare pentru cultura plantelor acvatice in statiile de
epurare a apelor uzate
|
Inventia se refera la descrierea unui acoperis de climatizare pentru cultura
plantelor acvatice in statiile de epurare a apelor uzate
|
1
|
http://www.cttecotech.ro/salon/postere/P233.png
|
0
|
234
|
Cristea Octavian, Andrei Patriciu, Marioara Godeanu
|
Microsesizor pentru stabilirea umiditatii solului
|
Inventia se refera la descrierea unui microsesizor pentru stabilirea
umiditatii solului
|
9
|
http://www.cttecotech.ro/salon/postere/P234.png
|
0
|
235
|
Daniliuc Ion, Colpacovici Iulian
|
Metoda de acordare a divizoarelor de tensiune
|
Inventia se refera la domeniul masurarilor electrice si poate fi utilizata
pentru transmiterea unitatii de rezistenta electrica de la etalonul primar la
etaloanele de grup, pentru verificarea divizoarelor de tensiune si de curent
de precizie, precum si pentru masurarea tensiunii curentului, rezistentei
etc.
|
2
|
http://www.cttecotech.ro/salon/postere/P235.png
|
0
|
236
|
Darabont A. s.a.
|
Dispozitiv de protectie vibroizolant pentru unelte pneumatice
|
Reducerea nivelului de vibratii generat de unelte pneumatice prin realizarea
unui dispozitiv de dispersare a energiei vibratiilor prin transformarea
oscilatiilor longitudinale în oscilatii transversale precum si transformarea
parametrilor acestor oscilatii cu ajutorul unui corp elastic inelar din
material metalic având diferite forme si dimensiuni în sectiune.
|
3
|
http://www.cttecotech.ro/salon/postere/P236.png
|
0
|
237
|
Darko Roglic
|
Croatian Inventors Association
|
|
20
|
|
0
|
238
|
Datcu C., Antohi Constantin Marin
|
Dispozitiv pentru determinarea unor diferente de temperatura
|
The device is using thermoelectrically elements (3) mounted onto the exterior
wall of a tank; the energy resulted can be stockpiled by an accumulator (AC)
and used for the emergency lightning of the area where the tank is placed.
|
20
|
http://www.cttecotech.ro/salon/postere/P238.png
|
0
|
239
|
Datcu C., Antohi Constantin Marin
|
Dispozitiv pentru determinarea unor deformatii
|
The device has a mirror attached on the surface of the assembly to be
measured; a transmitter formed by a LASER diode launches a fascicle on the
mirror’s surface and that will be reflected towards the photodiode. An
photoelectrical sensor will transform the light signal into a warning
acoustical signal when certain limits are reached.
|
14
|
http://www.cttecotech.ro/salon/postere/P239.png
|
0
|
240
|
David Boris, Filip Gheorghe, Tataru Sever, Vasile Constantin, Vacariu Vintila
Teodoru -
|
Procedeu de eliminare si recuperare a uraniului din ape reziduale uranifere
|
The procedure according to the invention is achieving
concomitantly the uranium removal in order to protect the environment and its
recovery for economic purposes. The procedure is accomplished using a strong
basic anions exchange resin. The resin retain uranium from the waste waters.
The uranium is then eluted with a solution of sodium chloride and sodium
carbonate. The sodium hydroxide is the uranium precipitation reagent. The
uranium content in the treated water is less then 0.3 mg/l. The invention is
industrially applied beginning with 2003.
|
5
|
http://www.cttecotech.ro/salon/postere/P240.png
|
0
|
241
|
David Boris, Filip Gheorghe, Vacariu Vintila Teodoru, Eftimescu Cornel
|
Procedeu si instalatie de extractie continua a uraniului
|
The procedure according to the invention combines the
counter-current settlement with flocculating agent addition and the clarified
solution filtration to obtain a solution with a solid content less then 50
mg/l, which is qualitatively appropriate for the application of the ion
exchange procedure with resin in fixed bed to the lixiviated uranium recovery
and concentration.
|
5
|
http://www.cttecotech.ro/salon/postere/P241.png
|
0
|
242
|
Deacu, L., Pop I.I.
|
Dispozitiv regulator de debit
|
Brevetul prezinta o solutie conceptuala noua de ventil regulator de debit, cu
reglare automata electronica a debitului
|
3
|
|
0
|
243
|
Deacu, L., Pop I.I., Tamas, R.
|
Motor hidraulic liniar proportional pentru roboti
|
Inventia descrie un motor hidraulic liniar proportional pentru roboti
|
3
|
|
0
|
244
|
Deacu, L., Pop, I.I., Ratiu, C.
|
Metoda pentru asigurarea sincronismului deplasarilor a doua motoare
hidraulice
|
Inventia propune o metoda originala de asigurare a sincronismului
deplasarilor a doua motoare hidraulice liniare
|
3
|
|
0
|
245
|
Deak G., Deak S., Georgescu P.D., Georgescu M., Hirian C., Juhas T., Muntean
I., Scurtu M., Predescu C., Fodor D., Marica E., Pavaleanu M., Simion S.
|
Statii DHG de monitorizare in situ a fiabilitatii sustinerilor
miniere
|
The invention presents the shafts lining friability
determination under in-situ conditions. It is based on the combination of two
monitoring systems one concerning the deformation phenomena (stations type
T-D 1) and the other one is related to the mining pressures (SD-TP2). Based
on this monitoring activity it can be plotted feasibility and viability
diagram of the shafts lining tested under geo-mining specific in situ
conditions
|
5
|
http://www.cttecotech.ro/salon/postere/P245.png
|
0
|
246
|
Debeli M.
|
Procedeu de decorare artistica a portelanului si sticlei
|
Procedeu de decorare artistica a portelanului si sticlei cu straturi
policrome de argint si de aur sitetic.
|
19
|
|
0
|
247
|
Delca I.
s.a.
|
Instalatie de incalzire cu caldarina
|
Inventia prezinta o instalatie de incalzire cu caldarina, pentru incalzirea
locuintelor individuale sau in grup mic
|
4
|
http://www.cttecotech.ro/salon/postere/P247.png
|
0
|
248
|
Delca I.
s.a.
|
Armatura pentru transmiterea si distributia caldurii din soba
|
Inventia se refera la o armatura pentru transmiterea si distributia caldurii
din sobele destinate incalzirii locuintelor
|
4
|
http://www.cttecotech.ro/salon/postere/P248-249.png
|
0
|
249
|
Delca I.
s.a.
|
Caldarina pentru instalatii de incalzire
|
Inventia se refera la o caldarina pentru o instalatie de incalzire a
gospodariilor individuale sau a apartamentelor si are, ca scop, reglarea
optimizata a temperaturii mediului, in incaperile acestora.
|
4
|
http://www.cttecotech.ro/salon/postere/P248-249.png
|
0
|
250
|
Deseatnic Alexandra, Clapco Steliana, Pasa Lilia, Garbalau Nicolai, Turta
Constantin, Gulea Aurelian, Tiurin Jana, Bologa Olga, Ceapurin Ludmila, Druta
Vadim, Corobceanu Eduard, Labliuc Svetlana, Sârbu Tamara, Condruc Viorica,
Lazarescu Ana, Stratan Maria
|
Medii nutritive pentru sinteza orientata a hidrolazelor exocelulare de catre
fungi
|
Inventiile rezolva problema obtinerii unor cantitati
sporite de enzime hidrolitice microbiene. Scopul se realizeaza prin
selectarea si includerea în mediul nutritiv de baza, în concentratii
optimizate a unor compusi coordinativi ai metalelor Cu, Ni, Mo, Co cu diversi
liganzi, care contin aminoacizi, semicarbazoane, dimetilglioxima, în calitate
de biostimulatori si stabilizatori ai capacitatii biosintetice a
producatorilor
|
11
|
http://www.cttecotech.ro/salon/postere/P250.png
|
0
|
251
|
Deseatnic Alexandra, Tiurin Jana, Pasa Lilia, Labliuc Svetlana, Clapco
Steliana, Sârbu Tamara, Condruc Viorica, Lazarescu Ana, Stratan Maria
|
Tulpini de fungi cu însusiri tehnologice înalte - producatori de enzime
hidrolitice
|
Au fost selectate si depozitate în Colectia Nationala de Microorganisme
nepatogene ca obiecte biotehnologice tulpinile de fungi cu capacitate înalta
de biosinteza a enzimelor exocelulare: Penicillium viride CNMN FD 04 -
producator de pectinaze, Aspergillus niger 33-19 CNMN FD 02 - producator de
amilaze, Penicillium expansum CNMN FD 05 - producator de celulaze,
Aspergillus niger (412) CNMN FD 01 si Rhizopus arrhizus (F67) CNMN FD 03 -
producatori de lipaze.Tulpinile cresc si se dezvolta bine pe medii nutritive
ieftine si accesibile, bazate pe reziduuri vegetale si deseuri ale industriei
alimentare
|
11
|
http://www.cttecotech.ro/salon/postere/P251.png
|
0
|
252
|
Dimonie M. s.a.
|
Aditiv si procedeu pentru prepararea bitumului de hidroizolatii
|
Aditiv pentru imbunatatirea proprietatilor bitumului pe baza de polimer
termoplastic si sulf.
|
6
|
http://www.cttecotech.ro/salon/postere/P252.png
|
0
|
253
|
Dimonie M. s.a..
|
Procedeu pentru polimerizarea acrilamidei
|
Procedeu nou de polimerizare a acrilamidei .
|
6
|
http://www.cttecotech.ro/salon/postere/P253.png
|
0
|
254
|
Doncean Gheorghe, Galdau Stan, Lazar Ioan, Sandu Ion
|
Instalatie pentru separarea si purificarea fluidelor electroconductibile
|
Inventia se refera la o instalatie pentru separarea si purificarea
fluidelorelectroconductibile, avand aplicatii in demineralkizarea apelor
utilizate in industria chimica, alimentara, farmaceutica, s.a.
|
6
|
http://www.cttecotech.ro/salon/postere/P254.pdf
|
0
|
255
|
Doncean Gheorghe, Lazar Ioan, Sandu Ioan, Stroescu Mihai, Leonte Petru
|
Instalatie pentru tratarea termica a materialelor
|
Inventia se refera la o instalatie de incalzire a materialelor plane,
flexibile, destinata pentru uscare, polimerizarea unor precondensate,
activare termica inainte de impregnare.
|
4
|
http://www.cttecotech.ro/salon/postere/P255.png
|
0
|
256
|
Doncean Gheorghe, Stroescu Mihai, Sandu Ioan, Lazar Ioan, Leonte Petru
|
Reactor magnetochimic
|
Reactorul conform inventiei are la baza un camp magnetic mixt, obtinut cu
niste magneti permanenti, si cu un circuit electromagnetic.
|
3
|
http://www.cttecotech.ro/salon/postere/P256.png
|
0
|
257
|
Dontu Zaharia, Jomiru Vasile
|
Le tournevis ? action de choc
|
Le tournevis ŕ action de
choc comprend une douille dans l'intérieur de laquelle est située la vis de
transport sans autofreinage sur laquelle est placé un écrou ŕ arc, une lame, un couvercle réglable ŕ un orifice pour la lame et dans
sa partie extérieure est effectuée une proéminence selon l'orifice mentionné
|
3
|
http://www.cttecotech.ro/salon/postere/P257.png
|
0
|
258
|
Dorogan V., S.Vieru, A.Caliman, T.Vieru, V.Secrieru, E.Munteanu, A.Dorogan
|
The Medical Devices for Laser Therapy
|
The medical devices for the laser therapy were made on the basis of laser
diodes with heterostructures AlGaAs - GaAs and InGaAs - GaAs. Electronic
circuits of the control block by the laser diode permits to select operation
modes and to set parameters of the device operation according to user aim.
Some designs of laser devices were elaborated for various medical
applications, their parameters are in comparison with existing world
analogues.
|
11
|
http://www.cttecotech.ro/salon/postere/P258.png
|
0
|
259
|
Dorogan V., T.Vieru, A.Dorogan, S.Vieru
|
Selective Photodiode with Modulated Sensitivity
|
Heterostructures on the basis InP- InGaAs-InGaAsP with potential barrier for
minority charge carriers in the valence band of the active structure allow to
make photodiode with photosensitivity modulated by supply voltage and new
functional properties.
|
2
|
http://www.cttecotech.ro/salon/postere/P259.png
|
0
|
260
|
Dorogan V., T.Vieru, V.Kantser, M.Manole
|
The Ultraviolet Radiation Sensors
|
The ultraviolet radiation sensors were made in the following way: utilization
of large-band-gap semiconductors; utilization of semiconductor
heterostructures with double surface barrier; forming of defect layer by ion
implantation in depth of visible radiation absorption; making of sensor with
two photoactive cells, differentially connected to loading resistor
|
20
|
http://www.cttecotech.ro/salon/postere/P260.png
|
0
|
261
|
Dorogan V., V.Kantser, T.Vieru
|
The Photodiode with selective two-coordinate Sensitivity
|
Heterostructures on the basis InP-InGaAsP with InGaAsP thick wide-gap frontal
layer assure selective sensitivity to l=1.06 mm. Central integral detector
with small aria allow to detect high-frequency optic signals
|
2
|
http://www.cttecotech.ro/salon/postere/P261.png
|
0
|
262
|
Dragusin Mitica
|
Procedeu de obtinere a superabsorbantilor hidrofili
|
The Patent RO 115 806 is applied in production by radiation processing of the
superabsorbants used in management of soil, ecological reconstruction of
industrial areas, construction of the sport spaces, turf. The sustainable
development of production as well as of arid, deserted soil is assured
|
1
|
http://www.cttecotech.ro/salon/postere/P262.png
|
0
|
263
|
Dragusin Mitica
|
Floculanti anionici si procedeu de obtinere in campuri de unde electromagnetice
|
The Patent RO 112 356 is applied in production by radiation processing and
microwave technologies of the flocullants as water soluble polymers used in
treatment of residual , polluted technological water from industry, food and
pharmaceutical industry, agriculture, building materials, etc.
|
1
|
http://www.cttecotech.ro/salon/postere/P263.png
|
0
|
264
|
Duca Gheorghe, Mereuta Aliona, Oniscu Corneliu, Ciobanu Tamara, Gonta Maria
|
Procedeu de purificare a acidului tartric
|
Summary of the invention consists in the tartaric acid
dissolution in water, filtration, separation and washing of crystals, as
well as drying thereof at 60...80°C, prior to the filtration being carried
out the treatment with 5% active coal, then into the filtered solution it is
added xylene, the water is removed by azeotropic distillation, and the
obtained tartaric acid crystals are washed with ether or acetone.
|
6
|
http://www.cttecotech.ro/salon/postere/P264.ppt
|
0
|
265
|
Dulgheru A., Alecu C.
|
Baze de detergent si procedeu de obtinere a acestora
|
Brevetul se refera la mai multe baze de detergent, pe schelet ftalic si
procedeul de obtinere a acestora.
|
6
|
http://www.cttecotech.ro/salon/postere/P265.png
|
0
|
266
|
Dumitras Marius
|
Multifunctional device for cutting process study in drilling
|
The proposed device allows the measure of axial force, torque and temperature
in mmetal cutting process by drilling and chip formation study.
|
5
|
http://www.cttecotech.ro/salon/postere/P266.png
|
0
|
267
|
Enea L.
|
Membrantechnik Gedruckte schaltungen
|
|
3
|
http://www.cttecotech.ro/salon/postere/P267.doc
|
0
|
268
|
Fazakas J., Fazakas E.
|
Chit pentru lipirea pieselor din bazalt
|
Inventia descrie modul de obtinere al chitului pentru lipirea pieselor din
bazalt
|
4
|
|
0
|
269
|
Fazakas J., Fazakas E.
|
Chit antiacid pentru lipirea pieselor din bazalt topit si recristalizat
|
Inventia descrie modul de obtinere al chitului antiacid pentru lipirea
pieselor din bazalt topit si recristalizat
|
4
|
|
0
|
270
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unui material ceramic termorezistent pe baza de
alumina
|
Se descrie procedeul de obtinere a unui material ceramic termorezistent pe
baza de alumina
|
3
|
|
0
|
271
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unor inele de etansare ceramice
|
Se descrie procedeul de obtinere a unor inele de etansare ceramice
|
3
|
|
0
|
272
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unor produse ceramice termostabile poroase
|
Se descrie procedeul de obtinere a unor produse ceramice termostabile poroase
|
3
|
|
0
|
273
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unei mase pentru produse ceramice
|
Se descrie procedeul de obtinere a unei mase pentru produse ceramice
|
3
|
|
0
|
274
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unor corpuri ceramice
|
Se descrie procedeul de obtinere a unor corpuri ceramice
|
3
|
|
0
|
275
|
Fazakas J., Fazakas E.
|
Procedeu de slefuire a suprafetelor din otel
|
Se descrie procedeul de slefuire a suprafetelor din otel
|
3
|
|
0
|
276
|
Fazakas J., Fazakas E.
|
Procedeu de granulare a meloplastului
|
Se descrie procedeul de granulare a meloplastului
|
3
|
|
0
|
277
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unei barbotine pentru corpuri ceramice steatitice
|
Se descrie procedeul de obtinere a unei barbotine pentru corpuri ceramice
steatitice
|
3
|
|
0
|
278
|
Fazakas J., Fazakas E.
|
Compozitie de glazura ceramica, transparenta sau opaca
|
Se descrie compozitia de glazura ceramica, transparenta sau opaca
|
6
|
|
0
|
279
|
Fazakas J., Fazakas E.
|
Compozitie de glazura ceramica antistatica
|
Se descrie compozitia de glazura ceramica antistatica
|
6
|
|
0
|
280
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a disiliciului de molibden
|
Se descrie procedeul de obtinere a disiliciului de molibden
|
6
|
|
0
|
281
|
Fazakas J., Fazakas E.
|
Compozitie de pasta lavabila cu apa
|
Se descrie compozitia de pasta lavabila cu apa
|
6
|
|
0
|
282
|
Fazakas J., Fazakas E.
|
Procedeu de realizare a butoanelor ceramice pentru capace emailate
|
Se descrie procedeul de realizare a butoanelor ceramice pentru capace
emailate
|
3
|
|
0
|
283
|
Fazakas J., Fazakas E.
|
Procedeu de preparare a unei pulberi ceramice
|
Se descrie procedeul de preparare a unei pulberi ceramice
|
3
|
|
0
|
284
|
Fazakas J., Fazakas E.
|
Masa ceramica poroasa pe baza de bazalt si procedeu de obtinere a acesteia
|
Se descrie procedeul de preparare a unei mase ceramice poroase pe baza de
bazalt
|
3
|
|
0
|
285
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unor placi subtiri din ceramica superaluminoasa
|
Se descrie procedeul de obtinere a unor placi subtiri din ceramica
superaluminoasa
|
3
|
|
0
|
286
|
Fazakas J., Fazakas E.
|
Stand de incercare la presiune a corpurilor ceramice
|
Se descrie standul de incercare la presiune a corpurilor ceramice
|
3
|
|
0
|
287
|
Fazakas J., Fazakas E.
|
Procedeu de realizare a bucselor ceramice
|
Se descrie procedeul de realizare a bucselor ceramice
|
3
|
|
0
|
288
|
Fazakas J., Fazakas E.
|
Dispozitiv pentru presarea izostatica a pulberilor metalice
|
Se descrie dispozitivul pentru presarea izostatica a pulberilor metalice
|
3
|
|
0
|
289
|
Fazakas J., Fazakas E.
|
Compozitie electrotermica
|
Se descrie modul de obtinere a compozitiei electrotermice
|
2
|
|
0
|
290
|
Fazakas J., Fazakas E.
|
Masa ceramica de tip cordierit
|
Se descrie modul de obtinere a masei ceramice de tip cordierit
|
3
|
|
0
|
291
|
Fazakas J., Fazakas E.
|
Compozitie plastifianta din pulbere ceramica, direct fasonabila prin presare
|
Se descrie compozitia plastifianta din pulbere ceramica, direct fasonabila
prin presare
|
3
|
|
0
|
292
|
Fazakas J., Fazakas E.
|
Procedeu de realizare a duzelor ceramice pentru ghidarea sarmei la masinile
de producere a cordului metalic
|
Se descrie procedeul de realizare a duzelor ceramice pentru ghidarea sarmei
la masinile de producere a cordului metalic
|
3
|
|
0
|
293
|
Fazakas J., Fazakas E.
|
Masa ceramica antielectrostatica
|
Se descrie modul de obtinere a masei ceramice antielectrostatica
|
6
|
|
0
|
294
|
Fazakas J., Fazakas E.
|
Compozitie ceramica cu proprietati anticorosive si rezistenta la solicitari
mecanice
|
Se descrie compozitia ceramica cu proprietati anticorosive si rezistenta la
solicitari mecanice
|
3
|
|
0
|
295
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unui material antiacid
|
Se descrie procedeul de obtinere a unui material antiacid
|
3
|
|
0
|
296
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unui material ceramic termorezistent pe baza de
alumina
|
Se descrie procedeul de obtinere a unui material ceramic termorezistent pe
baza de alumina
|
3
|
|
0
|
297
|
Fazakas J., Fazakas E.
|
Procedeu de obtinere a unei acoperiri decoretive pentru obiecte din portelan
|
Se descrie procedeul de obtinere a unei acoperiri decoretive pentru obiecte
din portelan
|
3
|
|
0
|
298
|
Feraru Constantin, Sandu Ion, Feraru Constantin, Sandu Emilia Miluta
|
Praf de curatat
|
Inventia se refera la o compozitie detergenta, nespumanta, in stare solida,
pulverulenta, cu mare capacitate de udare-inmuiere-dizolvare-degradare si
decapare a depunerilor de suprafata, cu sau fara reactie cu substratul.
|
6
|
http://www.cttecotech.ro/salon/postere/P298.png
|
0
|
299
|
Filip Gheorghe, Bejenaru Constantin, Bobe Mircea, Aldea Aron, Vacariu
Vintila, Aurelian Florian, Flucus Ioan, Matyas, Georgescu Petre-Dan
|
Procedeu de obtinere a solutiilor limpezi din tulburelile rezultate prin
lesierea alcalina a minereurilor uranifere
|
The procedure according to the invention combines the
counter-current settlement with flocculating agent addition and the clarified
solution filtration to obtain a solution with a solid content less then 50
mg/l, which is qualitatively appropriate for the application of the ion
exchange procedure with resin in fixed bed to the lixiviated uranium recovery
and concentration
|
5
|
http://www.cttecotech.ro/salon/postere/P299.png
|
0
|
300
|
Filip Gheorghe, Coldea Ioan, Tataru Sever, Vacariu Vintila
|
Procedeu de extragere a uraniului si fierului din cenusa de carbuni slab
radioactivi
|
The uranium extraction from low radioactive coal ashes is
accomplished through the grinding, sieving, pelletizing, bulk leaching using
H2SO4 ion exchange and precipitation. The iron removal is accomplished
through the pellets grinding after the uranium extraction, when the first one
is separated using a magnetic separation field of 1400Oë and a concentrate
having 55-60% Fe2O3. is obtained.
|
5
|
http://www.cttecotech.ro/salon/postere/P300.png
|
0
|
301
|
Filip Gheorghe, Popa Oliviu, Bejenaru Constantin, Bunus Florin, Vacariu
Vintila Teodoru, Miu Ion
|
Procedeu de conversie a fluorurilor de uraniu in diuranat de amoniu
|
The uranium fluoride technical concentrate is dissolved in
33% HNO3 solution in alumina presence. The uranium is extracted with TBP from
the nitric solution and then is precipitated as sodium diuranate. Alumina is
recovered and re-circulated from the residual solution. The thorium and the
rare earth elements are recovered from the same solution as well.
|
5
|
http://www.cttecotech.ro/salon/postere/P301.png
|
0
|
302
|
Fingherman Altar, Eminet Roland, Ivancu Constantin, Nicola Grigore, Rusanu
Alexandru
|
Procedeu de obtinere a unor panouri stratificate pentru lucrari de
constructii si panouri rezultate conform procedeului
|
Prezenta inventie se refera la un procedeu de obtinere a unor panouri
stratificate de inalta rezistenta usoare, ignifugate, destinate unor lucrari
deconstructii speciale
|
4
|
http://www.cttecotech.ro/salon/postere/P302.png
|
0
|
303
|
Furdui T., A. Nadvodniuc, V. Tucanov, V. Ciochina
|
The normobaric installation for the building and the maintenance of health
|
The installation provides an increased efficiency of the prophylaxis and the
treatment of the functional disorders. It is convenient in use
|
11
|
http://www.cttecotech.ro/salon/postere/P303.png
|
0
|
304
|
Catalin Alexandru Mihai, Vali Sadeanu, Ovidiu Toma, Cristina Bradea
|
Software interactiv pentru educaţie asistata de calculator
|
Lucrarea se refera la posibilitatea folosirii
calculatorului in educarea tinerilor in scoli.
|
2
|
|
0
|
305
|
Galis, M., Deacu, L., Pop, I.I.
|
Inversor fluidic fara contact
|
Brevetul propune o solutie noua de inversor fluidic fara contact
|
3
|
|
0
|
306
|
Ganea A., Corlateanu L., Chintea P., Svet S.
|
Procedeu de tratare a semintelor de castraveti cu viabilitate redusa
|
Inventia se refera la agricultura si poate fi aplicata în fitotehnie pentru tratarea
semintelor de castraveti dupa pastrarea lor îndelungata. Procedeul de tratare
a semintelor cu viabilitatea redusa include tratarea semintelor de castraveti
cu o solutie apoasa de extract de glicozide steroidice din radacini de
patlagele vinete. Rezultatul consta în sporirea viabilitatii semintelor de
castraveti.
|
9
|
http://www.cttecotech.ro/salon/postere/P306.png
|
0
|
307
|
Gavriliu Stefania, Enescu Elena
|
Procedeu de recuperare a slamurilor de tunder de la laminarea otelurilor
|
Recovery technique of the slurries from the steel lamination consists in
separation of liquid phase by decantation – centrifuging and a vacuum thermal
treatment at 100 … 300 mbar, at a maximum temperature of 400°C, following by
the solid phase processing in the purpose of iron oxides obtaining in pure
phase, having wide industrial applications.
|
3
|
http://www.cttecotech.ro/salon/postere/P307.png
|
0
|
308
|
Gherman Emil
|
Sonde parametrique pth multifonctionnelle
|
La sondee parametrique pTH, est un appareil d`interface pour telesignaliser
simultanement pour les parametres des liquides: la pression, la temperature,
le niveau et pH-ul; est designee pour les automatisations technologiques en
permettant le mesurage et la visualisations directe et locale. Construction
simple, robuste, sure en exploitation,facilement a monter et regler dans les
installations
|
3
|
http://www.cttecotech.ro/salon/postere/P308.doc
|
0
|
309
|
Gherman Emil ,Toma Prida, Elena-Carmen Gherman
|
Installation automatique aux accumulateurs hidropneumatiques a grande
capacite pour le service des filtres industrielles
|
1-elle reduit avec 85% le consumme de l’energie electrique d’un cycle de
filtration; 2-elle augmente jusq’a 33% la productivite des filtres; 3-elle
reduit avec 80% le nombre des arretes accidenteles; 4-le schema tehnologique
obtenu est flexible 100%.citatînalta de fixare a aotului
|
3
|
http://www.cttecotech.ro/salon/postere/P309.doc
|
0
|
310
|
Ghicavii Victor
|
Noi metode de tratament cu preparate autohtone de origine vegetala
|
Se descriu metode de tratament cu preparate autohtone de origine vegetala
|
12
|
|
0
|
311
|
Ghicavii Victor
|
Noi metode de tratament cu preparate autohtone de origine sintetica
|
Se descriu metode de tratament cu preparate autohtone de origine sintetica
|
12
|
|
0
|
312
|
Ghicavii Victor
|
Noi remedii de origine entomologica
|
Se descriu noi remedii de origine entomologica
|
12
|
|
0
|
313
|
Giurma Ion, Antohi Constantin Marin
|
Aparat pentru masurarea inaltimii unei coloane de lichid
|
The device is formed by a probe in a shape of a disc with four antipodes
nipples that maintain the probe in vertical position during descent into a
lake for determining the colmation level, the depth being determined by an
optical impulses transducer.
|
4
|
http://www.cttecotech.ro/salon/postere/P313.png
|
0
|
314
|
Gladcov Petre
|
Procedeu de prelucrare a suprafetelor interioare de revolutie
|
Inventia are scopul de a permite prelucrarea prin deformare plastica a suprafetelor
de rotatie pe masini de tipul strungului, prin gaurire fara burghiu, cu un
dorn, prelucrarea putând continua apoi cu aschierea obisnuita.
|
3
|
http://www.cttecotech.ro/salon/postere/P314.doc
|
0
|
315
|
Gladcov Petre
|
Dispozitiv de sudare in puncte cu electrozi dubli
|
Inventia asigura dublarea productivitatii procesului de sudare prin
rezistenta electrica în puncte a tablelor relativ subtiri, prin utilizarea a
doua perechi de electrozi de contact, obisnuiti.
|
3
|
http://www.cttecotech.ro/salon/postere/P315.doc
|
0
|
316
|
Gladcov Petre
|
Placuta dura aschietoare
|
Inventia se refera la un tip de placuta utilizabila în constructia sculelor
aschietoare, caracterizata de mai multe avantaje tehnico – economice, ca:
tensiuni termice interne mici, derivate dintr-o conductivitate termica
ridicata, siguranta mare în functionare.
|
3
|
http://www.cttecotech.ro/salon/postere/P316.doc
|
0
|
317
|
Gladcov Petre
|
Placuta dura amovibila
|
Inventia se refera la un nou tip de placuta utilizabila în constructia
sculelor aschietoare, caracterizata de mai multe avantaje tehnico –
economice: plasticitate ridicata, duritate mare a stratului superficial, cost
scazut.
|
3
|
http://www.cttecotech.ro/salon/postere/P317.doc
|
0
|
318
|
Gladcov Petre
|
Dispozitiv pulverizator pentru racirea cu jet de ceata a sculelor aschietoare
|
Inventia se refera la un dispozitiv pulverizator pentru racirea cu jet de
ceata a sculelor aschietoare, utilizabil în procesele de aschiere pe masini
unelte, asigurând cresterea durabilitatii sculelor.
|
3
|
http://www.cttecotech.ro/salon/postere/P318.doc
|
0
|
319
|
Gladcov Petre
|
Cutit de strung
|
Inventia se refera la un cutit de strung cu conductivitate termica marita în
vederea diminuarii tensiunilor termice cauzate de gradientul de temperatura
marit.
|
|
http://www.cttecotech.ro/salon/postere/P319.doc
|
0
|
320
|
Gladcov Petre, Catalin Gladcov
|
Dispositif pour soudage en pointes, avec d’électrodes multiples
|
L’invention assure augmentation de 2-5 fois de la productivité du processus
de soudage ? résistance électrique en points des tôles relatives minces, par
l’utilisation de 2-5 couples d’électrodes de contact, réglables.
|
3
|
http://www.cttecotech.ro/salon/postere/P320.doc
|
0
|
321
|
Goch V.
|
Goch’ s Method work in the Cause
|
Cause – property of Life and contents of living system as a form of Life.
Causality opens the laws, what precede to any activity. Unique Method of
research of Cause-Consequence connections in different directions of
activity, products, materials, technologies and with next harmonization
these…. It is possible using of this Method for expertise of different
scientific and practical resolutions.
|
2
|
|
0
|
322
|
Goch V., A. Kozlov
|
Technologies of harmony
|
"Technologies of Harmony" solve the problem of optimization of
management in sphere of economics and harmonization of social groups
development through understanding and transformation of negative cause and
effect connection of the biosystem “a person – administrative process” at
every level of organized matter, starting with level of hyperfine holograms,
at which the condition of any business or any process is written. This
Technology propose Method of research, correction and modeling of dynamic of
processes in business…
|
2
|
|
0
|
323
|
Goch V., P. Pepeskul, V. Samokhvalov, Yu. Skomorovskyy, O. Krivoruchko
|
Method of harmonization of space-time form of rehabilitation of one
|
Method connected with improvement of functional qualities of hospital as
space-time form of harmonization and rehabilitation of relations to health.
It include research and correction work in coordination with harmonization of
space and khronal processes of hospital seavices’ users on the basis of
Theory Causality’ technologies.
|
2
|
|
0
|
324
|
Goch V., V. Golovin, Yu. Skomorovskyy, N. Chornobay
|
Method of harmonization of electric transport’ work
|
Integration of Goch’ s Method work in the Cause with Runic Technologies
harmonize indices of work of electric transport, trolleybus routes work,
enterprise employees. Exist algoritm of harmonization of its’ work with wire
breaks decrease.
|
2
|
|
0
|
325
|
Goch V., V. Riabikh, V. Samokhvalov, Yu. Skomorovskyy
|
Transformator of Time «Lilji»
|
The device, which organize temporal manifestations of biological and
non-biological objects using resonance form. Their quality reinforced by
harmonizing manifestation of fields’ coding elements – New Runes. Their work
help to normalize, restore and to save the energy-informational (khronal)
flows around man, to improve functional indices of man.
|
11
|
|
0
|
326
|
Goch V., V. Samokhvalov, Yu. Skomorovskyy
|
Restorator of time “BIKL”
|
The device with resonance influence of electromagnetic fields of high rate
engines what organize manifestation of biological and non-biological objects.
Man’s physiological and psychological indices, his energetic-informational
potential are improved, if placed in electromagnetic field of high rate
engines (fixed number of rates) with pictographic resonators – New Runes for
a short period of time.
|
11
|
|
0
|
327
|
Goch V., V. Samokhvalov, Yu. Skomorovskyy
|
Method of Improvement of Functional Qualities of Reflective Mediums
|
Introduction of pictografic resonators (New Runes)by lazer beam to medium
improve functional indices(psycho-phisilogical processes) of these reflective
mediums (water, liquids, mirrors, screens, crystals etc.)users Patent of
Ukraine.
|
11
|
|
0
|
328
|
Goch V., Yu. Skomorovskyy
|
Mehod of work with first images
|
Method of selfcognition and selfregulation of a person, resolution of
creative tasks on the basis of the work with firstimages, technologies of
Theory of Causality and Runic Language.
|
11
|
|
0
|
329
|
Goch V., Mikerova I., Degtiarov A.
|
Devices for harmonization of space
|
We represent devices of harmonization of space (SHD), lives salutarily
influencing processes of life and on processes in the technical devices,
raising level of safety of living systems and the physical working capacity,
increasing adaptable opportunities of an organism of the person as a whole.
To trace a condition of space and influence on it of various forms at
creation SHD, the Theory of Causality and pictographic resonators is applied.
|
2
|
|
0
|
330
|
Godeanu Marioara, Bogatian Mariana, Nuta Demetra
|
Implicarea apei PI in refacerea solurilor deteriorate prin reziduuri
petroliere
|
Tehnologia se refera la posibilitati de refacere a solurilor deteriorate de
reziduuri petroliere prin irigarea cu apa PI si redarea lor in agricultura.
Apa PI se obtine intr-o instalatie compusa din filtre Bio-sistem Life-energy,
care prin tratarea apei din conductele de alimentare asigura o puritate deosebita
su un efect biotonic energizant. Apa se transporta la zona afectata, care
este in prealabil arata si se executa stropiri printr-un sistem clasic de
irigare la intervale de timp de 1…30 zile, in functie de gradul de
contaminare, cu doze de apa cuprinse intre 2 si maximum 100 l/mp.
|
5
|
http://www.cttecotech.ro/salon/postere/P330.png
|
0
|
331
|
Godeanu Marioara, Cristescu Gheorghe
|
Cromostimulator fotonic pentru studiul plantelor
|
Inventia se refera la un cromostimulator fotonic pentru studiul plantelor,
fiind alcatuit dintr-un tristor
|
9
|
http://www.cttecotech.ro/salon/postere/P331.png
|
0
|
332
|
Godeanu Marioara, Doina Anca Stanca, Tanase Cristian
|
Mutanta de Spirulina platensis (Nordst) Geitl, mediu pentru cultura si
procedeu de cultivare in flux continuu pentru obtinere de biomasa
|
Inventia se refera la mutanta de Spirulina platensis (Nordst) Geitl care este
mediu pentru cultura. S-a elaborat si un procedeu de cultivare in flux
continuu pentru obtinere de biomasa.
|
9
|
http://www.cttecotech.ro/salon/postere/P332.png
|
0
|
333
|
Godeanu Marioara, Stanca Doina, Cristea Gheorghe
|
Mutanta de spirulina (nordst) geitl, mediu de cultura, procedeu si instalatie
de cultivare in flux continuu a acestea
|
Brevetul are ca scop obtinerea de mutanta de spirulina (nordst) geitl care
este mediu de cultura. Inventia se refera la un procedeu si o instalatie de
cultivare in flux continuu a acestea
|
9
|
http://www.cttecotech.ro/salon/postere/P333.png
|
0
|
334
|
Godeanu Marioara, Stanca Doina, Stan Constantin
|
Compozitie pentru produse cosmetice, cu efect terapeutic
|
Inventia se refera la fabricarea de compozite pentru produse cosmetice, cu
efect terapeutic, de protejare a dermei contra radiatiilor solare.
|
11
|
http://www.cttecotech.ro/salon/postere/P334.png
|
0
|
335
|
Godeanu Marioara, Stanca Doina, Stanescu Ioana
|
Forma de spirulina platensis (nordst) geitl si mediu de cultura pentru
obtinerea de biomasa
|
Inventia se refera la o mutanta de Spirulina platensis (Nordst) Geitl
Nachensis (CCTE/96). Cianobacteria are filamentele de 30-150 spire cu
lungimea de 350…4000 µm si productivitatea cuprinsa intre 1,5-1,8 kg/mp/zi cu
proteine 64,8%, acizi nucleici in medie 3,5% si pigmenti asimilatori 8,9-10,3
mg/g. Mediul de cultura este dizolvat in apa PI, apa minerala si
termominerala, cu pH-ul 8,0-8,5 si concentratii saruri de 5,300 g/l,
iluminare naturala, cultivare in flux continuu.
|
1
|
http://www.cttecotech.ro/salon/postere/P335.png
|
0
|
336
|
Godeanu Marioara, Stanca Doina, Tanase Cristian, Muresan Marius, Rupea Bogdan
|
Compozitie adjuvanta pentru terapia medicala
|
Inventia se refera la fabricarea de compozite pentru produse cosmetice, cu
efect terapeutic.Compozitia conform inventiei este constituita din 35….65
parti biomasa de Spirulina si 35….65 parti pulbere, obtinuta din specii
marine.
|
11
|
http://www.cttecotech.ro/salon/postere/P336.png
|
0
|
337
|
Godeanu Marioara, Stefanescu Elena
|
Compozitie alimentara sub forma de gel si procedeu de obtinere a acestuia
|
Inventia se refera la o compozitie alimentara sub forma de gel si procedeul
de obtinere al acestuia.
|
7
|
http://www.cttecotech.ro/salon/postere/P337.png
|
0
|
338
|
Godeanu Marioara, Stefanescu Elena, Stefanescu Paul
|
Compozitie alimentara
|
Inventia se refera la o compozitie alimentara de o inalta valoare nutritiva
|
7
|
http://www.cttecotech.ro/salon/postere/P338.png
|
0
|
339
|
Godeanu Marioara, Stefanescu Elena, Stoenescu Valentina, Oprea Nicoleta
Tanase Cristian
|
Bautura racoritoare si procedeu de obtinere a acesteia
|
Inventia se refera la o bautura racoritoare si la un procedeu de obtinere al
acesteia.
|
7
|
http://www.cttecotech.ro/salon/postere/P339.png
|
0
|
340
|
Godeanu Marioara, Stefanescu Elena, Tanase Cristian
|
Compozitie energizanta si trofica pentru patiserii si cofetarii
|
Inventia se refera la o compozitie energizanta si trofica pentru patiserii si
cofetarii.
|
7
|
http://www.cttecotech.ro/salon/postere/P340.png
|
0
|
341
|
Godeanu Marioara, Stefanescu Elena, tefanescu Paul
|
Concentrat antocianic si procedeu de obtinere
|
Inventia se refera la un procedeu de obtinere al unui concentrat antocianic.
|
6
|
http://www.cttecotech.ro/salon/postere/P341.png
|
0
|
342
|
Godeanu Marioara, Constantin Iulian, Dumitru Boti, Stoica Godeanu, Ioan Lup,
Dan Mandes Predescu
|
Procedeu si instalatie de epurare biologica a apelor reziduale rezultate de
la complexele zootehnice
|
Se descrie instalatia de epurare biologica a apelor reziduale rezultate de la
complexele zootehnice
|
1
|
http://www.cttecotech.ro/salon/postere/P342.png
|
0
|
343
|
Godeanu Marioara, Constantin Iulian, Preda Stoica Godeanu, Victor Isvoranu,
Adalbert Magyari
|
Procedeu si instalatie pentru epurarea biologica a apelor reziduale
organo-fosforice
|
Se descrie instalatia pentru epurarea biologica a apelor reziduale
organo-fosforice
|
1
|
http://www.cttecotech.ro/salon/postere/P343.png
|
0
|
344
|
Godeanu Marioara, Constantin Iulian, Spiridon Victor Isvoranu
|
Instalatie pentru epurarea biologica a apelor reziduale
|
Se descrie instalatia pentru epurarea biologica a apelor reziduale
|
1
|
http://www.cttecotech.ro/salon/postere/P344.png
|
0
|
345
|
Godeanu Marioara, Ioan Lup, Dumitru Boti, Preda Stoica Godeanu
|
Instalatie de epurare biologica a apelor reziduale rezultate de la complexele
zootehnice
|
Se descrie instalatia de epurare biologica a apelor reziduale rezultate de la
complexele zootehnice
|
1
|
http://www.cttecotech.ro/salon/postere/P345.png
|
0
|
346
|
Godeanu Marioara, Serafina Sava, Eva Elena Cosmin, Victor Isvoranu, Stoica
Godeanu
|
Procedeu de epurare biologica a apelor reziduale cianurice
|
Se descrie procedeul de epurare biologica a apelor reziduale cianurice
|
1
|
http://www.cttecotech.ro/salon/postere/P346.png
|
0
|
347
|
Godeanu Stoica Preda, Teoaca Petre
|
Dispozitiv pentru recoltare de probe de apa
|
Se descrie dispozitivul pentru recoltare de probe de apa
|
1
|
http://www.cttecotech.ro/salon/postere/P347.png
|
0
|
348
|
Godeanu Stoica Preda, Teoaca Petre
|
Sonda pentru recoltare de probe bentonice
|
Se descrie sonda pentru recoltare de probe bentonice
|
1
|
http://www.cttecotech.ro/salon/postere/P348.png
|
0
|
349
|
Gonceariuc Maria, Balmus Zinaida
|
Soi de plante – serlai Natali-Clary
|
Soi nou de serlai (Salvia sclarea L) Natalia- Clary de 2 ani, tardiv
rezistent la ger, iernare, seceta. Garanteaza productie de materie prima de
19.5t/ha si ulei esentiale 48.4kg/ha, calitate superioara a uleiului
essential si a conceretului. In uleiul esential concentratia acetatului de
linalila 69.8%, linalool 12%, sclareol 13.0% . Concentratia sclareolului in
concret 76.3%
|
7
|
http://www.cttecotech.ro/salon/postere/P349.png
|
0
|
350
|
Gonceariuc Maria, Balmus Zinaida
|
Soi plante – galbenele Diana
|
Soi nou de Calendula officinalis L. Diana rezistent la seceta cu
inflorescente involte de 6,4 cm in diametru, productia de materie prima
uscata 1.5t/ha, concentratia de flavone exprimata in rutin 0.624g%,
polifenoli exprimati in cinarina 1.021g/%.
|
12
|
http://www.cttecotech.ro/salon/postere/P350.png
|
0
|
351
|
Gonceariuc Maria, Balmus Zinaida,
|
Soi de plante - Jales(Salvia officianalis L.) Miracol
|
Este creat un soi nou de Jales (Salvia officianalis L.) Miracol cu termini de
inflorire medii, rezistent la ger, iernare si seceta. Garanteaza din prima
recoltare productie de frunze poraspete de 29.6q/ha ori 8.4q/ha frunze uscate
cu continut de ulei essential de 2.361% (s.u.). Productia de ulei essential –
18.0 kg/ha.
|
12
|
http://www.cttecotech.ro/salon/postere/P351.gif
|
0
|
352
|
Gonceariuc Maria, Balmus Zinaida,
|
Soi plante – levantica Moldoveanca-4
|
Este creat un soi-clona nou de levantica (Lavanda angustifolia Mill)
Moldoveanca – 4 cu termeni de inflorire timpurii, rezistent la ger, iernare
si seceta. Se deosebeste prin productie de materie prima inalta – 70q/ha,
continut inalt de ulei essential – 4.392%(s.u.). Productia de ulei esential –
100.6 kg/ha.
|
12
|
http://www.cttecotech.ro/salon/postere/P352.gif
|
0
|
353
|
Gonceariuc Maria, Balmus Zinaida,
|
Soi plante – levantica Alba-7
|
Este creat un soi-clona nou de levantica (Lavanda angustifolia Mill) Alba – 7
cu termeni de inflorire medii, rezistent la ger, iernare si seceta.
Garanteaza o productie de materie prima de 50q/ha, continut inalt de ulei
essential – 5.229% (s.u.). Productia de ulei essential – 103kg/ha.
|
12
|
http://www.cttecotech.ro/salon/postere/P353.gif
|
0
|
354
|
Gonceariuc Maria, Balmus Zinaida,
|
Soi plante – levantica Vis magic-10
|
Este creat un soi-clona nou de levantica (Lavanda angustifolia Mill) Vis
magic – 10 cu termeni de inflorire tardiv, rezistent la ger, iernare si seceta.
Garanteaza o productie de materie prima de 54q/ha, continut inalt de ulei
essential – 4.231% (s.u.). Productia de ulei essential – 90.2kg/ha.
|
12
|
http://www.cttecotech.ro/salon/postere/P354.gif
|
0
|
355
|
Gonceariuc Maria, Balmus Zinaida, Jacota Anatol
|
Soi de plante - armurariu(Silybun marianum (L.) Gaerth.) Argintiu
|
Soi nou de Armurariu (Silybun marianum) Argintiu timpriu, rezistent la
seceta. Majoritatea antodiilor ajung la maturizare concomitant si permit
recoltarea mecaizata. Productia medie de fructe – 7.9 q/ha.
|
12
|
http://www.cttecotech.ro/salon/postere/P355.gif
|
0
|
356
|
Gonceariuc Maria, Balmus Zinaida, Jacota Anatol
|
Soi plante - marar(Anethum graveolens L.) Ambasador
|
S-a creat un soi de (Anethum graveolens L.) marar Ambasador cu termeni
timpurii de maturizare tehnica, rezistent la seceta. Soiul se caracterizeaza
prin productivitate inalta: materie prima 10.5t/ha, ulei esential 88kg/ha,
continutul de carvon in ulei 39.8%
|
12
|
http://www.cttecotech.ro/salon/postere/P356.gif
|
0
|
357
|
Gonceariuc Maria, Balmus Zinaida, Jacota Anatol
|
Soi plante – serlai Victor
|
Soi nou de serlai (Salvia sclarea L) Victor de 2 ani tardiv, rezistent la
seceta, ger, iernare. Garanteaza productie sporita de inflorescente –
15.9t/ha) si ulei essential – 38.9kg/ha (a.I 6,5kg/ha; a.II 32.4kg/ha),
calitate inalta a uleiului esential si a concretului: in uleiul esential
acetat de linalila 72%, linaloolul 12%, sclareol 5.9%. Sclareol in concret
69.5%
|
12
|
http://www.cttecotech.ro/salon/postere/P357.png
|
0
|
358
|
Gonceariuc Maria, Balmus Zinaida, Jacota Anatol
|
Soi plante – serlai Dacia-99
|
Soi de serlai (Salvia scalarea L) Dacia – 99 de 2 ani cu termeni de coacere
medii, rezistent la seceta, boli, ger, iernare. Productia de materie prima –
14.6t/ha (2.0t/ha anul I; 12.6 anul II); ulei essential – 40.9kg/ha (5.2kg/ha
anul I; 35.7kg/ha la anul II). Concentratia componentilor principali: in ulei
– acetate de linalila - 70%; linalool - 11%; sclareol -8-10%; In concret –
sclareol - 71%
|
12
|
http://www.cttecotech.ro/salon/postere/P358.png
|
0
|
359
|
Gonceariuc Maria, Balmus Zinaida, Jacota Anatol, Florea Vasile
|
Soi plante – galbenele Natali
|
Soi nou de Calendula officinalis L. Natali rezistent la seceta cu
inflorescente involte, mari, de 6.3 cm in diametru, productia de materie
prima uscata 1.4t/ha, concentratia de flavone exprimata in rutin 0.873g%,
prolifenoli expriamti in cinarina 0.988g/%.
|
12
|
http://www.cttecotech.ro/salon/postere/P359.png
|
0
|
360
|
M.S. Goncharenko, I.E. Smaraieva, O.V. Goncharenko
|
Complex of seasonal phytoteas for increasing children’s organisms’ resistance
|
Stage-by-stage seasonal input in a children's organism of assembly of herbs
allows to carry out updating of the attitude of the most vulnerable in the
given season of bodies and systems of an organism of children. Use gathering
" Autumn little wreath " in the autumn, in the winter - "
Winter morning ", in the spring - "Vesnyanka", in the summer -
"The Elderly cool ", owing to it during each season children
receive vitamins, micro and macro elements at which the most vivifying and
corrective actions on an organism of the child and it is directed act on
those bodies and systems of an organism which during the given time of year
require support. The offered way increase of resistance of an organism of
children is a lung in application and means long updatings of bodies and
systems of an organism of children can be used.
|
11
|
|
0
|
361
|
M.S. Goncharenko, I.E. Smaraieva, O.V.Goncharenko, K.P. Lemeshko
|
Treatment-and-preventive syrup “VALEOTON”
|
Inexpensive product of a children's and improving feed on the basis of
domestic raw material. Appointed for enrichment of a diet by biologically
active substances, vitamins, micro and macro elements; increase of processes
of self-regulation and self-restoration of the adaptable opportunities
necessary for mental and intellectual development of an organism. The syrup
"Valeoton" prepares by dissolution of sugar in an extract of
gathering of 27 herbs at presence of an amber acid. A syrup
"Valeoton" renders immunostimulating, adaptogenic, general tonic
preventive action on an organism, and can be used as the independent food
additive or for inclusion in structure of confectionery products
|
11
|
|
0
|
362
|
Gruneantu Iosif
|
Procedeu si stand pentru determinarea temperaturii scanteilor mecanice
|
The procedure relies on producing sparks between a moving knife and a piece
of rock, into an environment with known oxygen containing. The stand is made
from a room with known oxygen containing, in which is placed a rock sample,
cut by a moving knife. The sparks produced during the cutting are
continuously recorded with a video camera and later their temperature and
lasting are determined through photopyrometric methods.
|
5
|
http://www.cttecotech.ro/salon/postere/P362.png
|
0
|
363
|
Gudumac Valentin, Gulea Aurelian, Rudic Valeriu, Sandu Ion, Cretu Viorel
|
Metoda spectrofotometrica pentru determinarea seleniului
|
Inventia se refera la o metoda spectrofotometrica de determinare a seleniului
din biomasa de spirulina, utilizata in urmarirea proceselor biotehnologice de
obtinere a unor proteine sau a altor substante biologic active sau din probe
necesare unor procese din industria sticlei.
|
6
|
http://www.cttecotech.ro/salon/postere/P363.png
|
0
|
364
|
Gulea Aurélian , Victor Tsapcov , Stela Spinu, Ion Bulimestru
|
Nouveaux materiaux dielectriques
|
Le procédé est dirigé au problčme de la synthčse de nouveaux matériaux diélectriques non traditionnels ayant la
haute qualité en utilisant les complexes hétéro-nucléaire de bismuth avec les
métaux rare set alcalino-terreux.
|
2
|
http://www.cttecotech.ro/salon/postere/P364.png
|
0
|
365
|
Gulea Aurélian, Donald Poirier, Victor Tapcov, Jenny Roy
|
Inhibiteurs pour la leucemie
|
Au fost sintetizati agenti cu activitate anticancerogena (Leukemia 60, care
de 1,8-2,1 ori depasesc caracteristicele analoage controlului (concentratia
inhibitorului este (4-6) x 10-7 mol/l).
|
11
|
http://www.cttecotech.ro/salon/postere/P365.png
|
0
|
366
|
Gulea Aurelian, Rudic Valeriu, Sandu Ion
|
Procedeu de obtinere γ -MnO2-activ
|
Inventia se refera la industria chimica, in special, la un procedeu de
obtinere a γ -MnO2-activ,
si poate fi utiulizata ca masa elecrochimic-activa pentru elemente si baterii
galvanice uscate cu electroliti acizi sau alcalini.
|
6
|
http://www.cttecotech.ro/salon/postere/P366.png
|
0
|
367
|
Gutsanu Vasile, Cojocaru Ludmila
|
New selective sorbent containing Bi(III)
|
This invention consists in that the cross-linked ionic
polymers containing strongly basic groups are preliminarily modified with Bi(NaO3)3 solution at certain conditions. Obtained
sorbent posses sorbtional selectivity towards F-, I-, Br-, HS- (S2-) ions
and S- containing compounds and permit purify liquid and gaseous systems.
|
6
|
http://www.cttecotech.ro/salon/postere/P367.png
|
0
|
368
|
Gutsanu Vasile, Drutsa Raisa
|
Processes for obtaining selective sorbents and their regeneration
|
These three inventions relates to chemistry, namely to the
obtaining of new selective sorbents based on modification at strongly basic
anion exchangers with metallic (Al) compounds which a able to remove colorant
substances from liquids, and regeneration of modified polymers with Fe(III)
and Cr(III) compounds after their exhaustion. Regenerated polymers are able
to be modified with metallic compounds again.
|
6
|
http://www.cttecotech.ro/salon/postere/P368.png
|
0
|
369
|
Gutsanu Vasile, Roshca Ilie
|
Processes for selective removal of cyanide, thiocyanate, cyanate ions from
solutions
|
This invention relates to chemistry, namely to a process
for solution purification from cyanide, thiocyanate and cyanate ions,
including waste waters, obtained as a result of non-ferrous and noble metals
extraction and the by-product coke industry. The invention consist in that
the solution containing toxic ions is passed through a column with selective
sorbent obtained by preliminary modification of strongly basic anion
exchangers with Fe(III) compounds.
|
6
|
http://www.cttecotech.ro/salon/postere/P369.png
|
0
|
370
|
Hermenean Ioan s.a.
|
Masina de suprainsamantat pajisti degradate
|
The carried machine works making rows. Each active organ can copy the soil
surface between plus minus 10 cm. It is composed of a frame on which the
equipment of gutter opening and the equipment for sowing assembled. Teh
equipment of gutter opening is made from sections of gutter opening disposed
on two rows and assembled on the frame with two shoulder traps. Between the
shoulder brace for fixing on the frame and the body of the section there were
assembled deformed parallelograms, activated by a spring assembled behind
allowing the copy of the ground contours and maintaining the constant angle
of attack of the active organ. The sowing equipment consists of a seed box
with two partitions, one for big seeds (of perennial grasses or other crops)
and one for small seeds (perennial legumes), distributors and stirrers for
grass seeds, ditributors for herbage legume seeds, tubes for the leadership
of the seeds to the furrows and the mechanism of the involving made from
stellar wheel which follows the soil, a Northon type gear box and
transmission with chains between these and the axis of distributors and
agitators.
|
9
|
http://www.cttecotech.ro/salon/postere/P370.png
|
0
|
371
|
Hermenean Ioan s.a.
|
Echipament de administrat conservant solid concomitent cu recoltarea si
tocarea furajelor
|
The equipment is fitting on the harvesting and chopping forage harvested
combine and allows the distribution with high accuracy and uniformity of the
conservation products in the forage mass. An original mechanism performs the
permanent variation of the quantity, depending on the instantaneous forage
flow which enters in the combine for making a good silage with high feed
value.
|
9
|
http://www.cttecotech.ro/salon/postere/P371.png
|
0
|
372
|
Hostuc Petre, Bobe Mircea, Tataru Sever, Vacariu Vintila
|
Procedeu si instalatie de extractie a uraniului din suspensii minerale prin
schimb ionic
|
In order to accomplish the ion exchange between the
uranium containing mineral suspensions and the ions exchanging resin, the
latter having a standard size (0.3-1.2 mm) is protected against the abrasive
action of the reaction medium by its introduction inside of metallic spheres
manufactured by stained steel wire cloth with 0.6/0.6mm mesh. Uranium
sorption and elution is carried out in the same column without the resin
transfer.
|
5
|
http://www.cttecotech.ro/salon/postere/P372.ppt
|
0
|
373
|
Iacobas Sanda, Vartic Aurel, Godeanu Marioara, Munteanu Ioan
|
Procedeu pentru valorificarea fitomasei acvatice
|
Se descrie procedeul de valorificarea fitomasei acvatice
|
1
|
http://www.cttecotech.ro/salon/postere/P373.png
|
0
|
374
|
Ibadov Ia.
|
Alternative Psychology
|
Method open possibility to study phasic states of living systems with next
correction for good influence to living processes. Using of Method is
preferable for medicine, biology, psychology, history, culturology and other
sciences. Eurasian Patent.
|
11
|
|
0
|
375
|
Ignat Mircea, Tugulea Andrei, Puflea Ioan
|
Microsenzor pentru detectia campului magnetic slab
|
Microsensor is made from a tubular structure of non-magnetic dielectric
material, in which is introducing a ferromagnetic core, with a high
permeability, with diameter smaller or equal with 5 µm, with a 2 – 4 cm
length, which is magnetizing in the low magnetic field. On tubular structure
is a primary excitation winding and a secondary winding detecting on the
second harmonic, ratio between the windings being 1-2 and 1-4
|
2
|
http://www.cttecotech.ro/salon/postere/P375.png
|
0
|
376
|
Ilias Nicolae, Stanila Sorina, Andras Iosif, Gruneantu Iosif, Zamora Adriana
|
Procedeu si stand pentru determinarea temperaturii scanteilor mecanice
|
The procedure relies on producing sparks between a moving knife and a piece
of rock, into an environment with known oxygen containing. The stand is made
from a room with known oxygen containing, in which is placed a rock sample,
cut by a moving knife. The sparks produced during the cutting are
continuously recorded with a video camera and later their temperature and
lasting are determined through photopyrometric methods.
|
3
|
http://www.cttecotech.ro/salon/postere/P376.png
|
0
|
377
|
Ion Ion, Simionescu Ion
|
Robot pasitor modular
|
Inventia se refera la un robot pasitor modular destinat deplasarii unei
sarcini tehnologice pe un teren neamenajat in scopul efectuarii de lucrari
specifice in agricultura, silvicultura, in medii periculoase, in misiuni
militare, etc.
|
3
|
http://www.cttecotech.ro/salon/postere/P377.pdf
|
0
|
378
|
Ionescu I.
|
Servo-valve miniaturisée
|
Structure électrohydraulique avec performances supérieures
destinée ŕ régler les
facteur de puvoir hydraulique (débit, pression) dans les systčmes hydrauliques auto-matiques.
|
3
|
http://www.cttecotech.ro/salon/postere/P378.doc
|
0
|
379
|
Ionescu I.
|
Servo-valve électrohydraulique pour regler le debit
|
Structure électrohydraulique ŕ hautes performances déstinée ŕ régler le débit dans les
structures hydrauliques de réglage automatique ayant comme élément
d’execution des verines hydauliques asymétriques.
|
3
|
http://www.cttecotech.ro/salon/postere/P379.doc
|
0
|
380
|
Ionescu I.
|
Servo-commande électrohydraulique pour procčses rapides
|
Structure électrohydraulique avec performances superieures
destinée ŕ actionner précis
les charges grandes avec assurance de stabilité en functionnement.
Conception: Structure hydraulique asymétrique de actionnement avec dynamique
supérieur; palier intelligent; unité simple et ultrarapide pour protection ŕ surcharge; un bon compromis
stabilité – prčcision –
rapidité.
|
3
|
http://www.cttecotech.ro/salon/postere/P380.doc
|
0
|
381
|
Ionescu I.
|
A new direct drive servo-valve, whith simplified mechanical and electrical
structure
|
A new concept in innovation – “functional integration” (defined
by author). Flow regulation to drive hydraulic actuators or motors in
closed-loop servo-systems in aeronautical field (autostabilization systems,
autopilot systems, nosewheel control, kerosene feed regulation, spoiler
actuator etc.), torpedo fin control, elevation and bearing control for tank
turrets, hydraulic circuits for submarines, robots, machine-tools etc.
|
3
|
http://www.cttecotech.ro/salon/postere/P381.pdf
|
0
|
382
|
Ionescu I.
|
Covertisseur d'énergie ŕ
des materiaux intélligentes
|
Structure a des matériaux intelligentes qui, par l’action
de courant électrique et par la réunion d’une nombre limité de volumes
disloqués réalise une débit de sortie ŕ consommation réduite d’énergie électrique et sans des pičces mouvement.Systčmes hydrauliques automatiques par des
pompes sans moteur électrique et ŕ
consommation réduite d’énergie électrique.
|
3
|
http://www.cttecotech.ro/salon/postere/P382.doc
|
0
|
383
|
Ionescu I.
|
A new miniature linear force motor with large frequency band for microdrive
in aerospace field
|
Structure a des matériaux intelligentes qui, par l’action
de courant électrique et par la réunion d’une nombre limité de volumes
disloqués réalise une débit de sortie ŕ consommation réduite d’énergie électrique et sans des pičces mouvement.Systčmes hydrauliques automatiques par des
pompes sans moteur électrique et ŕ
consommation réduite d’énergie électrique.
|
3
|
http://www.cttecotech.ro/salon/postere/P383.doc
|
0
|
384
|
Ionescu I.
|
Servo-valve for brake pressure
|
Flow regulation to drive hydraulic actuators or motors in closed – loop
servosystems in aeronautical field (autostabilization systems autopilot,
systems, nosewheel control, kerosene feed regulation, spoiler actuator etc.),
torpedo fin control, elavation and bearing control for tank, turrets,
hydraulic circuits for submarines, robots, machine – tools etc.
|
3
|
http://www.cttecotech.ro/salon/postere/P384.doc
|
0
|
385
|
Ionescu I.
|
Miniature electrohydraulic servo-valve
|
A new concept in innovation – “functional integration” (defined by
author).Flow regulation to drive hydraulic actuators or motors in closed-loop
servo-sys-tems in aeronautical field (autostabilizationm systems, autopilot
systems, nosewheel control, kerosene feed regulation, spoiler actuator etc.),
torpedo fin control, elevation and bearing control for tank turrets,
hydraulic circuits for submarines, robots, machine-tools etc.
|
3
|
http://www.cttecotech.ro/salon/postere/P385.doc
|
0
|
386
|
Ionescu I.
|
A new electrohydraulic structure with synergic drive and large frequency band
by the DDV type
|
A new electrohydraulic structure with synergic drive and large frequency band
by the DDV which:- type the decrease of the production cost; ingenious
construction, extremely simple;the decrease of the seals; the decrease of
internal sewerage; the simplification of the geometrical configuration of the
pieces; a simply assembly; a great safety to function; the reduction of the
weight.
|
3
|
http://www.cttecotech.ro/salon/postere/P386.doc
|
0
|
387
|
Ionescu I.
|
Hydraulic mechanism for aircraft direction on land roling
|
Smart structure which realizes a output flow by the flow added in the same
time under the electric current action. Destination: Hydraulic systems
|
3
|
http://www.cttecotech.ro/salon/postere/P387.doc
|
0
|
388
|
Ionescu I.
|
Motorless and produced electrical comsumption pump with a smart structure
|
Smart structure which realizes a output flow by the flow added in the same
time under the electric current action. Destination: Hydraulic systems.
Advantages: the electrical motor is eliminated; the decrease of electrical
consumption; driven by computer; a large flexibility of the parameters;
ingenious construction, extremely simple; the considerable decrease in the
number of mechanical pieces; considerable miniature; a great safety.
|
3
|
http://www.cttecotech.ro/salon/postere/P388.pdf
|
0
|
389
|
Ionescu I.
|
Micropump with linear force motor and synergetic drive
|
Electromagnetic structure with low dimensions which realizes a microflow
under the electric current action. Destination: secret regime. Advantages:
more efficiency by a great output power at low dimensions; more efficiency by
nozzle/diffuser only in output; ingenious construction, extremely simple;
redundancy in the electronic control unit; the decrease in the number of
mechanical pieces; considerable miniature.
|
3
|
http://www.cttecotech.ro/salon/postere/P389.doc
|
0
|
390
|
Iorga I.
si al.
|
Ciocan pneumatic de daltuit
|
Realizarea unui ciocan pneumatic de daltuit cu nivel de vibratii redus, prin
dispersarea energiei vibratiilor longitudinale succesive si atenuarea
reculului acestuia
|
3
|
http://www.cttecotech.ro/salon/postere/P390.png
|
0
|
391
|
Iorga I.
si al.
|
Dispozitiv pentru protectia urechilor impotriva zgomotului
|
Protectia lucratorilor care isi desfasoara activitatea in mediul de munca cu
nivel de zgomot ridicat impotriva efectelor negative ale acestuia prin
marirea eficientei acustice si realizarea unui asamblu simplu si usor de
purtat pentru protectia urechilor impotriva zgomotului.
|
11
|
http://www.cttecotech.ro/salon/postere/P391.png
|
0
|
392
|
Ivanova Raisa, Tatarov Pavel, Ciumeica Valentina
|
Procedeu de obtinere a compozitiei uscate de iod cu amidon
|
Inventia se refera la medicina, în particular la farmacie si poate fi
utilizata în calitate de baza a formelor farmaceutice pentru profilaxia si
tratamentul maladiilor iododeficitare. Procedeul de obtinere a compozitiei
uscate de iod cu amidon consta în aceea ca amidonul în prealabil se spala cu
apa, se separa, se amesteca cu solutie hidroalcoolica de 2...5% de iod având
raportul amidon : iod corespunzator (100...200) : (0,6...1,6), apoi produsul
|
12
|
http://www.cttecotech.ro/salon/postere/P392.png
|
0
|
393
|
Jacota A, Chintea P, Svet S., Serban E.
|
Procedeu de tratare a semintelor de sfecla de zahar înainte de semanat
|
Tratarea semintelor de sfecla de zahar înainte de semanat
conduce la sporirea germinatiei semintelor si rezistentei plantelor la
factori abiotici si biotici si marirea continutului de zahar al rizocarpelor.
|
9
|
http://www.cttecotech.ro/salon/postere/P393.png
|
0
|
394
|
Jecu Elena
|
Astacus leptodactylus Esch. (1823) Controlled Spawning Method
|
The method for obtaining of the 5-10 days juveniles
crayfish in fish hatcheries consist in: crayfish broodstock selection,
madeing and eggs lay out on the pleopodes, crayfish eggs preventive
treatment, incubation, hatching, first and second moulting and delivery.
Biological process are developing in normal conditions.
|
20
|
http://www.cttecotech.ro/salon/postere/P394.png
|
0
|
395
|
Jomiru Vasile , Jomiru Dorian
|
Dispozitiv de masurare a puterii transmise de arbore
|
Dispozitiv de masurare a puterii transmise de arbore care
contine un traductor de turatie a arborelui, un traductor al momentului de
torsiune, un formator de semnale, un bloc de comanda, o schema de masurare si
un inregistrator
|
15
|
http://www.cttecotech.ro/salon/postere/P395.png
|
0
|
396
|
Jomiru Vasile , Jomiru Dorian
|
Metoda de determinare a presiunii de comprimare la motoarele cu ardere
interna cu aprindere prin scanteie
|
Metoda de determinare a presiunii de comprimare la motorul cu ardere interna
cu aprindere prin scanteie include aplicarea impulsurilor de tensiune inalta
la bujia motorului aflat in stare de repaus si in regim de antrenare.
|
15
|
http://www.cttecotech.ro/salon/postere/P396.png
|
0
|
397
|
Jomiru Vasile, Jomiru Vladimir
|
Metoda de diagnosticare a injectorului electromagnetic
|
Se aplica la diagnosticarea starii tehnice a sistemului de alimentare a
motoarelor.
|
3
|
http://www.cttecotech.ro/salon/postere/P397.png
|
0
|
398
|
Jomiru Vasile, Jomiru Dorian
|
Dispozitiv de diagnosticare a ambreiajului cu frictiune
|
Se aplica la testarea si diagnosticarea ambreiajului autovehiculului in
conditii
de stationare si de rulare.
|
15
|
http://www.cttecotech.ro/salon/postere/P398.png
|
0
|
399
|
Jomiru Vasile, Jomiru Dorian
|
Metoda de diagnosticare a sistemului de ungere a motoarelor cu ardere interna
|
Masurarea presiunii uleiului in rampa centrala de ungere la turatii constante
ale arborelui cotit in regimurile de scurgere si fara scurgerea uleiului
printrun drosel calibrat racordat la rampa centrala de ungere
|
15
|
http://www.cttecotech.ro/salon/postere/P399.png
|
0
|
400
|
Jomiru Vasile, Jomiru Dorian
|
Metoda de determinare a presiunii de comprimare la motoarele cu ardere
interna cu aprindere prin scanteie
|
Metoda de determinare a presiunii de comprimare include
masurarea curentilor bujiei motorului aflat in stare de repaus si in regim de
antrenare, iar presiunea de comprimare se calculeaza in functie de acesti
curenti.
|
|
http://www.cttecotech.ro/salon/postere/P400.png
|
0
|
401
|
Jomiru Vasile, Dontu Zaharia
|
Dispositif de détermination de la vitesse de l'impact de l'automobile
|
Le dispositif de détermination de la vitesse de l'impact
de l'automobile est doté d'un mécanisme de fixage de l'aiguille indicatrice
du mesureur de la vitesse de l'automobile. Lors de l'impact sous l'action de
la force d'inertie le mécanisme de fixage positionne le disque du rotor mené
et sur le tableau du mesureur de la vitesse de l'automobile est lue la
vitesse lors du moment de l'impact. La détermination de la vitesse de
l'impact de l'automobile est indispensable ŕ l'analyse des accidents routiers
|
3
|
http://www.cttecotech.ro/salon/postere/P401.png
|
0
|
402
|
Kalinin L,
Zaitev D, Berzan V., Tirsu M
|
Instalatie de reglare a fazelor dirijata cu chei electronice de putere
|
Imbunatatirea indiciilor energetici a instalatiei prin modificarea
constructiei transformatorului in serie care contine numai doua module si
utilizarea schmei rationale de conexiune a elementelor asigurand valorile
admise a coeficientului de distorsiune a tensiunii.
|
2
|
http://www.cttecotech.ro/salon/postere/P402.png
|
0
|
403
|
“KIT ELECTRIC” (inventie colectiva)
|
La pieuvre en maison individuelle
|
La pieuvre en maison individuelle. Eléments techniques: distribution par les
combles ou en chape; conformité avec normes et labels; conception
personnalisée; plan informatique couleur joint.
|
2
|
http://www.cttecotech.ro/salon/postere/P403.jpg
|
0
|
404
|
Kulikov V.
|
Innovative technologies of exhibition activity
|
Innovative, investment projects and programs of city’ development as a
harmonical realization of relations. Development in all exhibitions part
«Innovations and Inventions». Realization of innovative programs in tourism
and modes of rest.
|
11
|
http://www.cttecotech.ro/salon/postere/P404.doc
|
0
|
405
|
Lapteva N., Vaintraub I.
|
Procedeu de obtinere a izolatului proteic modificat din srot de
floarea-soarelui
|
The invention refers to the food industry, namely to a
process for obtaining a modified proteinic food isolate that can be used as
proteinic additive in the production of food products.
|
7
|
http://www.cttecotech.ro/salon/postere/P405.ppt
|
0
|
406
|
Lazarescu Constantin, Antohi Constantin Marin
|
Sistem de cultura vegetala in zone desertice
|
The system contains a series of heat pipes with capillary structure,
vertically buried onto the soil to regulate the temperature of the
germination area, a plastic foil against water evaporation, water that is
supplied by a tank through an electro valve commanded by humidity sensors.
|
9
|
http://www.cttecotech.ro/salon/postere/P406.png
|
0
|
407
|
Lazarescu Constantin, Antohi Constantin Marin
|
Corp de incalzire
|
The invention refers to a heating assembly used for rooms, formed by a number
of heat pipes, with the evaporation area inserted into a case 1, and the
condensation area united with radiators 6. when the heating agent is missing,
the assembly contains an electrical resistance 4 which rises the temperature
of the heating agent trapped inside by the faucets 2 and 3.
|
10
|
http://www.cttecotech.ro/salon/postere/P407.png
|
0
|
408
|
Lazarescu Constantin, Antohi Constantin Marin
|
Corp de incalzire si dezinfectie
|
The apparatus is formed by a case 1 with a convector 2 and convector radiator
3 with a germicide tube 4 above mounted onto the focal of a spherical mirror;
a fan 6 placed on the inferior side move the air through the convector, the
convector radiator and the UV fascicle; two clack valves allows the air to
circulate only through the convector or concomitant through both.
|
10
|
http://www.cttecotech.ro/salon/postere/P408.png
|
0
|
409
|
Lazarescu Constantin, Antohi Constantin Marin
|
Sistem de incalzire solara, cu acumulare
|
The system is formed by a solar captivator 1 with two glass windows 2
separate by a thin layer of air, with black heat pipes 3 which penetrate a
wall 4 and a isolating layer 5; the pipes are constrained with the
condensation are 6 in an accumulator wall; the adjustment of the thermal flux
in the room is realized by jalousies 8.
|
10
|
http://www.cttecotech.ro/salon/postere/P409.png
|
0
|
410
|
Leonte Mircea, Glaman Gheorghe
|
Produs de origine vegetala pentru combaterea daunatorilor plantelor si de
crestere a imunitatii lor, compozitii care il contin si metoda de protectie a
plantelor
|
The invention relates to a composition comprising chemical
compounds employed in agriculture, particularly in horticulture for combating
the plant diseases and pests and for stimulating the plant immunity against
the same. The composition comprises polyphenol compounds similar to those
used by plants for the phytosanitary protection and transition metals
derivatives having a catalytic and complexing role upon the chemical
components of the composition.
|
6
|
http://www.cttecotech.ro/salon/postere/P410.png
|
0
|
411
|
Leonte Mircea
|
Beverage with ecological-biological properties and process for the
preparation thereof
|
In the maceration condition according to the invention,
there takes place the metabolization of pesticides more particularly of the
organo-chlorurates and organophosporic by the yeasts, forming a redox buffer
system and accumulation of numerous biologically active components which
confer ecological-biological properties to the products.
|
6
|
http://www.cttecotech.ro/salon/postere/P411.png
|
0
|
412
|
Leonte Mircea
|
Bauturi cu proprietati ecologico-biologice si procedeu de obtinere a acestora
|
The invention refers to beverages with ecological-biological properties, such
as wine, frut and vegetable juice, etc, and to a process for obtaining the
same. The beverages according to the invention have a content of 0,1-2 g/l
natural polyphenolic type oxidants and are obtained by squashing the vegetal
material in the presence of natural polyphenolic type antioxidants contained
in 0,1-0,5 kg alimentary tannin, galo- or elagotannin respectively per ton of
vegetal material, followed by maceration for 10-100 hours, drawing the must,
fermentation and usual conditioning.
|
7
|
http://www.cttecotech.ro/salon/postere/P412.png
|
|
413
|
Leorda Ana, Timosco Maria
|
The association of the strains of the bifidobacterium longum var. Animalis
and lactobacillus acidophilus bacteria producing b1, b2 and b3 vitamins
|
The proposed association can be used for the production of the
curative-prophylactic preparations designed to increase the synthesis level
of the vitamins of group B in the alimentary tube.
|
11
|
http://www.cttecotech.ro/salon/postere/P413.png
|
0
|
414
|
Lupascu G. s.a.
|
Antistresant pentru grâul comun de toamna
|
Inventia se refera la agricultura si poate fi utilizata în calitate de
antistresant pentru grâul comun de toamna. Esenta inventiei consta în aceea
ca în calitate de antistresant se utilizeaza glicozidele steroidice sumare
izolate din seminte de Trigonella foenum-graecum L. Antistresantul permite
sporirea rezistentei plantelor de grâu comun de toamna la fuzarioza si
temperatura joasa.
|
9
|
http://www.cttecotech.ro/salon/postere/P414.png
|
0
|
415
|
Lupascu Andrei, Bernic Mircea, Creanga Sergiu
|
Procédé d’obtention de la confiture sans traitement thermique
|
La fabrication traditionnelle de la confiture consiste dans un traitement
thermique des fruits avec du sucre et autres ingrédients mineurs. Ce
traitement favorise une destruction presque totale des substances nutritives.
L’introduction du sirop de sucre sous l’action de la pression permet de
réduire ces pertes et aussi les pertes d’énergie
|
7
|
http://www.cttecotech.ro/salon/postere/P415.png
|
0
|
416
|
Lupascu Andrei, Bernic Mircea, Tarlev Vasile, Tarna Ruslan, Terzii Ilia,
Osoianu Gheorghe, Bernic Daniela
|
Ligne technologique pour le séchage des noix
|
Les noix représentent un intérét spécial grâce au contenu d’huile et les
substances nutritives qui se contient dans le cerneau. Le séchage des noix
permet la diminution de la quantité d’eau des cerneaux pour une meilleure
conservation ou une meilleure extraction ultérieure de l’huile, ainsi que la
conservation des noix pour une période plus longue de temps.
|
7
|
http://www.cttecotech.ro/salon/postere/P416.png
|
0
|
417
|
Lupascu Andrei, Bernic Mircea, Tarlev Vasile, Tislinschi Natalia, Raducanu
Marcel, Mosanu Aleona, Lupu Olga
|
Procédés de sechage du piment, de l´églantier, de la griotte et de l´abricot
|
Les fruits et les légumes sont des produits périssables. Le séchage permet la
conservation de ces produits pour une période plus longue de temps qu’en état
naturel. Les conditions de séchage sont ajustées pour une perte minime des substances
nutritives. Ils consistent en deux étapes : la premičre par la méthode convective et la deuxičme par la méthode mixte de
séchage – convective dans champ électromagnétique de haute fréquence
|
7
|
http://www.cttecotech.ro/salon/postere/P417.png
|
0
|
418
|
Lupascu Andrei, Bernic Mircea, Tarlev Vasile, Tislinschi Natalia, Raducanu
Marcel
|
Ligne technologique pour le sechage des prunes
|
Le séchage est réalisé par la méthode convective et combinée – et convective
en champs électromagnétique de haute fréquence. La ligne technologique est
prévue avec des installations pour le nettoyage, le séchage et l’emballage
des prunes.
|
7
|
http://www.cttecotech.ro/salon/postere/P418.png
|
0
|
419
|
Macovei Florica, Giurca Radu, Anghelescu Luminita, Speranta Cristian, Godeanu
Marioara, Bancescu Doru
|
Procedeu de valorificare a fitomasei acvatice din Pistia stratiotes
|
Se descrie procedeul de valorificare a fitomasei acvatice din Pistia
stratiotes
|
1
|
http://www.cttecotech.ro/salon/postere/P419.png
|
0
|
420
|
Martîniuc Nicolae , Mihail Toderas, Alexandru Condriuc, Simion Potapov
|
Pompa laser pentru lubrifierea îmbinarilor cu frictiune a aparatelor de zbor
|
Principul de lucru a pompei pentru lubrifierea îmbinarilor cu frictiune se
bazeaza pe folosirea razei Laser, care avanseaza spre pompa din panoul de
dirijare a aparatului de zbor de pe pamânt, pentru încalzirea amestecului de
gaze (heliu si florura de sulf). Cresterea volumului de amestec gazos asigura
înaintarea lichidului lubrifiant spre îmbinarile cu frictiune.
|
3
|
http://www.cttecotech.ro/salon/postere/P420.png
|
0
|
421
|
Martîniuc Nicolae , Mihail Toderas, Alexandru Condriuc, Simion Potapov
|
Dispozitiv pentru prevenirea deraparii semiremorcii – refrigerator la
circulatia autotrenurilor pe automagistrale lunecoase
|
Principul de lucru a dispozitivului se bazeaza pe crearea efortului pneo opus
directiei de derapare a semiremorcii-refrigerator la miscarea autotrenului pe
automagistrala lunecoasa. Procesul de lucru a elicei aeriene este automat.
|
15
|
http://www.cttecotech.ro/salon/postere/P421.ppt
|
0
|
422
|
Marza Mitica, Maftei Teodor, Cirliceanu Anton, Sandu Ion, Ioachim Dan
|
Dispozitiv pentru protectia motoarelor electrice trifazate
|
Se descrie dispozitivul pentru protectia motoarelor electrice trifazate
|
3
|
http://www.cttecotech.ro/salon/postere/P422.png
|
0
|
423
|
Mascenco Natalia, Chintea P., Lupascu Galina, Sasco Elena
|
Procedeu de tratare a semintelor de culturi cerealiere si leguminoase
|
Inventia se refera la agricultura si poate fi utilizata pentru stimularea
cresterii plantelor de grâu comun, soia si mazare. Se propune compusul
triozida (25R)-spirost-5-en-3ß, 22?, 26 triolului pentru stimularea cresterii
plantelor de grâu comun, soia si mazare. Rezultatul inventiei consta în
stimularea cresterii plantulelor de grâu comun, soia si mazare la etape
timpurii de dezvoltare.
|
9
|
http://www.cttecotech.ro/salon/postere/P423.png
|
0
|
424
|
Melnic V. s.a.
|
The isolation and early discrimination of Campylobacter jejuni and
Campylobacter coli assure the effective therapy and prevention of
Campylobacteriosis
|
The proposed culture media allow the isolation, discrimination and early and
accurate identification of the colonies of the two intestinal pathogens
Campylobacter jejuni and Campylobacter coli. The culture medium for the
isolation and discrimination of Campylobacter species contains hydrolysate of
casein, enzymatic peptone, yeast extract, potassium chloride, agar, blood,
nizoral, rifampicine, cefasoline and polymyxine M sulfate. The media for the
identification contain agar and D-malate or propionate.
|
11
|
http://www.cttecotech.ro/salon/postere/P424.doc
|
0
|
425
|
Mihaila D., Georgescu P.D., Filipoiu I.D., Morariu Z., Stan C., Prisecaru I.,
Ghitescu P.
|
Sistem de rezemare cu role de rostogolire pentru tamburii morilor folosite la
procesarea minereurilor radioactive
|
The invention presents a propping system with rolling
rollers for the mills drums used at radioactive ores processing. The present
grinding installations with ball mill for radioactive ores are endowed with
rolling-friction bearings. The new proposed propping system improves mills
operating parameters and achieves significant energy and materials savings.
|
5
|
http://www.cttecotech.ro/salon/postere/P425.png
|
0
|
426
|
Minca Mihai
|
Aparat pentru masurarea duritatii în alezaje
|
Inventia se refera la un aparat pneumohidraulic pentru masurarea duritatii în
alezaje.
|
3
|
http://www.cttecotech.ro/salon/postere/P426.doc
|
0
|
427
|
Minca Mihai
|
Dispozitiv pentru omogenizarea amestecului aer-combustibil si ionizarea
acestuia la motoarele cu ardere interna
|
Inventia prezinta o solutie simpla pentru omogenizarea amestecului
aer-combustibil si ionizarea acestuia la motoarele cu ardere interna,
asigurand cresterea randamentului motoarelor si scaderea consumului de
carburant.
|
3
|
http://www.cttecotech.ro/salon/postere/P427.doc
|
0
|
428
|
Minca Mihai
|
Aparat pentru masurarea duritatii
|
Inventia se refera la un aparat hidraulic pentru masurarea duritatii la
suprafetele interioare si exterioare.
|
3
|
http://www.cttecotech.ro/salon/postere/P428.doc
|
0
|
429
|
Minca Mihai
|
Brosa
|
Inventia se refera la scule de brosat cu dinti aplicati si reglabili ca
înaltime, utilizate la prelucrarea alezajelor, a suprafetelor profilate si a
pieselor cu suprafete plane . inventia se poate aplica si la alte tipuri de
scule, cum ar fi frezele pentru danturat roti dintate, pt. prelucrat
suprafete profilate sau plane si altele .
|
3
|
http://www.cttecotech.ro/salon/postere/P429.doc
|
0
|
430
|
Minca Mihai
|
Masina pentru confectionat flanse
|
Inventia se refera la o masina de confectionat flanse circulare, din
platbanda sau din fasii de tabla, prin deformare plastica la rece sau la cald.
|
3
|
http://www.cttecotech.ro/salon/postere/P430.doc
|
0
|
431
|
Minca Mihai
|
Instalatie pentru prelucrare electrochimica a materialelor metalice
|
Inventia prezinta o instalatie pentru prelucrarea materialelor metalice prin
procedeul electrochimic, cu numeroase avantaje.
|
3
|
http://www.cttecotech.ro/salon/postere/P431.doc
|
0
|
432
|
Minca Mihai
|
Dispozitiv universal de etansare si protectie pentru arbori si lagare
|
Inventia se refera la un sistem universal de etansare si protectie pentru
arbori si lagare, constand din mai multe inele si bucse care srang intre ele
un inel de cuciuc, pe suprafete frontale dublu striate, cu o mare suprafata
de etansare. Dispozitivul are o mare fiabilitate, inclusiv in mediu abraziv.
|
3
|
|
0
|
433
|
Miron Liviu, Miron Ionel
|
Metoda de marire a ritmului de crestere a midiilor in mediu lacustru sau
marin si custi pentru aplicare
|
This method and the use of submerse cages are applied in fishy farms, in the
reservoirs where the maximal thermal season causes the decrease of
alimentation consecutive with a diminution of the growth. In marine
environment the cages are drowned in profundity at distance from the
destructive effect of the waves.
|
9
|
http://www.cttecotech.ro/salon/postere/P433.png
|
0
|
434
|
Moga Vasile
|
Procedeu de fabricare a unui panou sandwich si panoul astfel obtinut
|
Inventia prezinta un procedeu de fabricare a panourilor sandwich cu miezul
din faguri si fetele din composite polimerice. Procedeul are loc la rece si
permite finisaje de tip gel-coat.
|
4
|
http://www.cttecotech.ro/salon/postere/P434.doc
|
0
|
435
|
Moga Vasile
|
Structura pentru constructii usoare
|
Inventia prezinta o structura de rezistenta formata din stâlpi si grinzi din
materiale composite, utilizabila foarte avantajos în constructiile moderne.
|
4
|
http://www.cttecotech.ro/salon/postere/P435.doc
|
0
|
436
|
Moraru Virgil, Sandu Ion, Moraru Camelia, Sandu Irina Crina Anca, Sandu Ioan
Gabriel, Sandu Andrei Victor
|
Procedeu de obtinere a tesserelor policrome si utilizarea lor pentru
realizarea mozaicurilor si vitraliilor artistice
|
Inventia se refera la realizarea unor structuri glazurate pe sticla plana,
opace sau transparente, sub forma tesserelor policrome si a unui procedeu de
montaj, în vederea punerii în opera a mozaicurilor si vitraliilor artistice
|
19
|
http://www.cttecotech.ro/salon/postere/P436.pdf
|
0
|
437
|
Moroz Petru
|
Metoda de corectie a deformitatii în displazia fizara distala de radius la
copii
|
Esenta inventiei consta în efectuarea osteotomiei subperiostale
supracondilare a fragmentelor de humerus distal cu rezectia fragmentelor
proeminente, corectia deformatiei prin restabilirea axei normale, adaptarea
si fixarea fragmentelor cu ajutorul broselor. Metoda propusa consta în faptul
ca interventia subperiostala protejeaza tesuturile paraarticulare de
traumatizare si previne formarea osificatelor, iar rezectia fragmentelor
proeminente permite corectia deformatiei, asigura posibilitatea restabilirii
functiei si contribuie la un aspect cosmetic bun. Rezultatul inventiei consta
în reconstructia segmentului distal de humerus. La copiii operati s-au
obtinut rezultate cosmetice si functionale bune.
|
11
|
http://www.cttecotech.ro/salon/postere/P437.png
|
0
|
438
|
Moroz Petru
|
Metoda de artroplastie capsulara in tratamentul chirurgical al luxatei de
sold la copil
|
Esenta metodei propuse consta in aceea ca cotilul este curatat de tesuturi
conjunctive, fara traumatizarea cartilajului si artroplastia capsulara este
efectuata astfel incat se pastreaza fixarea capsulei cu spranceana cotilului,
ceea ce asigura pastrarea vascularizarii si restabilirea anatomica a
acetabului.
|
11
|
http://www.cttecotech.ro/salon/postere/P438.png
|
0
|
439
|
Moroz Petru
|
Metoda de corectie a deformitatii diafizare de gamba la copii
|
Metoda se realizeaza in mod chirurgical sub anestezie generala, prin doua
incizii. Prin incizia liniara de o lungime de 6 cm pe bordul lateral al
gambei se sectioneaza tesuturile moi superficiale, subperiostal se
developeaza osul peroneu si se efectueaza osteotomia la nivelul treimii
medii. Prin incizia pe partea mediala anterioara a gambei de la nivelul
tuberozitatii tibiei si pana la metafiza distala a gambei, dupa sectiunea
tesuturilor moi superficiale si developarea subperiostala a tibiei pe tot
parcursul, se efectueaza osteotomia proximala a tibiei la hotarul metafizei
si diafizei si similar in zona distala.
|
11
|
http://www.cttecotech.ro/salon/postere/P439.png
|
0
|
440
|
Moroz Petru
|
Metoda de plastie ligamento-tendinoasa in picior stramb plat valg displazic
la copii
|
Metoda este destinata tratamentului chirurgical al piciorului plat valg
displazic la copii, la varsta de 3-10 ani. Metoda se efectueaza sub anestezie
generala, prin incizie pe partea mediala a piciorului de la maleola mediala
pana la nivelul primului os cuneiform. Scopul inventiei consta in corectia
piciorului, crearea stabilitatii ligamentotendinoase, protejarea cresterii
osoase.
|
11
|
http://www.cttecotech.ro/salon/postere/P440.png
|
0
|
441
|
Moroz Petru
|
Metoda de reconstructie a fracturilor metafizare vicios consolidate de
humerus distal la copii
|
Esenta inventiei consta in efectuarea osteotomiei subperiostale
supracondilare a fragmentelor de humerus distal, cu rezectia fragmentelor
proeminente, corectia deformatiei prin restabilirea axei normale, adaptarea
si fixarea fragmentelor cu ajutorul broselor. Interventia subperiostala
protejeaza tesuturile paraarticulare de traumatizare si previne formarea
osificatelor, iar rezectia fragmentelor proeminente permite corectia
deformatiei , asigura posibilitatea restabilirii functiei si contribuie la un
aspect cosmetic bun.
|
11
|
http://www.cttecotech.ro/salon/postere/P441.png
|
0
|
442
|
Motoroi Marilena, Brad Ion, Zamfirescu Sanda, Popescu Veronica, Tamas Viorica
|
Solutie uleioasa medicamentoasa cu efect regenerator si reepitelizant
|
Inventia se refera la o solutie uleioasa medicamentoasa cu efect generator si
reepitalizant, obtinuta din fructe de Hipophae rhamnoides (catina).
|
12
|
http://www.cttecotech.ro/salon/postere/P442.doc
|
0
|
443
|
Musat Constantin
|
Motor cu ardere interna.
|
Inventia se refera la un motor cu ardere interna utilizat pentru actionarea
autovehicolelor sau a altor masini. Problema tehnica pe care o rezolva
inventia este de a realiza un motor cu ardere interna cu alta amplasare a
cilindrilor astfel încât sa elimine lanturile cinematice complexe ale
sistemelor de distributie, ale sistemelor de racire, avantaje care se
concretizeaza în eliminarea arborelui cotit si a axului cu came, amplasarea
mecanismelor auxiliare pe axul motor, introducerea unui raport de
transformare a miscarii la axul motor prin angrenaje conice cu efect direct
asupra dinamicii motorului, randamentului, micsorarii spatiului ocupat.
Inventia cuprinde mai multe solutii tehnice privind noul sistem de amplasare
a cilindrilor: amplasarea circulara a cilindrilor, eliminarea arborelui cotit
si introducerea unor roti conice pentru transmiterea miscarii de la
mecanismul piston-biela-manivela la un ax motor central, eliminarea axului cu
came si amplasarea a doua came pe axul motor, eliminarea transmisiilor la
axul cu came, la pompa de racire, ventilator prin amplasarea acestora pe axul
motor, eliminarea volantei functia ei fiind preluata de o roata conica
centrala fixata pe axul motor, fixarea ambreiajului pe roata conica centrala
pentru transmiterea miscarii la cutia de viteze.
|
3
|
http://www.cttecotech.ro/salon/postere/P443.png
|
0
|
444
|
Nasui Vasile
|
Electrocilindru telescopic
|
Sistemele mecanice de rototranslatie modulare, reprezinta o conceptie noua în
transmisiile mecanice de diferite tipuri si destinatii, care înlocuiesc
eficient sistemele clasice actionate mecanic, hidraulic, sau pneumatic.
Acestea ofera solutia optima pentru constructia transmisiilor mecanice
cantitative si calitative, datorita flexibilitatii largi de utilizare,
randamentului mare, capacitatilor cinematice, dinamice si de precizie
ridicate.
|
3
|
http://www.cttecotech.ro/salon/postere/P444.pdf
|
0
|
445
|
Neacsu Cristian
|
Ecran antiphare
|
L’ensemble-écran covexe ŕ
„volets” angles optiques (anti-phares
et lumičre naturelle).
Cette invention est destinée ŕ
améliorer nettement la visibilité et protéger la vue tout en évitant les lumičres des phares des véhicules ou
autres venant en sens inverse notamment la nuit et le jour de la lumičre des rayons horizontaux du
soleil.
|
4
|
http://www.cttecotech.ro/salon/postere/P445.jpg
|
0
|
446
|
Neamtu Jenica, Kappel Wilhelm
|
Procedeu de obtinere a materialelor magnetice compozite cu proprietati de
ecranare
|
Obtaining technique of composite magnetic materials with shielding properties
consists of thermal treatment on roasted pyrite in hydrogen atmosphere 100%
at 1,1 atm. pressure and 800-900o C
temperatures, 1-2 hours, with heating speed of 9o C/min and cooling speed of 40o C/min.
|
1
|
http://www.cttecotech.ro/salon/postere/P446.png
|
0
|
447
|
Nechifor A. M. s.a.
|
Procedeu si instalatie pentru indepartarea derivatilor aromatici din ape
uzate
|
Indepartarea compusilor aromatici toxici din ape uzate prin procese hibride
si membrane lichide.
|
6
|
http://www.cttecotech.ro/salon/postere/P447.png
|
0
|
448
|
Nechifor G. s.a.
|
Procedeu de preparare a membranelor polimerice
|
Procedeu de preparare a unor membrane polimerice din polietersulfona in
vederea utilizarii in procese de separare de baromembrana: microfiltrare,
ultrafiltrare si osmoza inversa.
|
6
|
http://www.cttecotech.ro/salon/postere/P448.png
|
0
|
449
|
Nechifor G. s.a.
|
Procedeu de obtinere a unei membrane polimerice pentru micro- si
ultrafiltrare
|
Inventia se refera la obtinerea de membrane polimerice folosite in special
pentru micro- si ultrafiltrarea sistemelor disperse, continand particule
coloidale sau macromolecule.
|
6
|
http://www.cttecotech.ro/salon/postere/P449.png
|
0
|
450
|
Neda-Cojocaru Tudor
|
Minicentrala hidroelectrica
|
The mini-power station according to the invention is provided with a dam
including a metal panel with a window closed by a dumper and a welded flange
on the pipe mounted on the dam. The other pipe end has a nozzle supplying
water to drive a turbine coupled to an electric generator.
|
1
|
http://www.cttecotech.ro/salon/postere/P450.png
|
2
|
451
|
Neda-Cojocaru Tudor
|
Instalatie pentru prelucrarea integrala a gunoaielor menajere
|
The plant for the integral processing of domestic waste,
according to the invention, has a double transport band, including a short
band for non-biodegradable waste transport to an incinerator and a long band
for biodegradable waste transport to containers used to process this waste
for the production of compost, largely used in the agriculture.
|
1
|
http://www.cttecotech.ro/salon/postere/P451.png
|
2
|
452
|
Neda-Cojocaru Tudor
|
Instalatie de selectare a gunoaielor menajere
|
The plant for the domestic waste selection, according to
the invention, is provided with a transport platform, having above it a
gripping-type device and a deflector device, both hydraulically driven, and
having the role to transfer the biodegradable waste from the selection band to
the transfer band. The gripping-type device is provided with a vibrator and
the deflector can horizontally turn by 90°.
|
1
|
http://www.cttecotech.ro/salon/postere/P452.png
|
2
|
453
|
Nemtoi Silvia, Varnischi Nedelea, Nemtoi Gheorghe, Sandu Ion, Feraru
Constantin
|
Procedeu de obtinere a unei pulberi detergente, inalt dispersive
|
Inventia se refera la un procedeu de obtinere a unei pulberi detergente,
inalt dispersive, realizata prin saponificarea subproduselor rezultate la
rafinarea uleiului de soia. Inainte de saponificare, aceste subproduse se
supun unui proces hidrotermal, de purificare, dezodorizare, cu separare
mecanica, prin decantare-sifonare a unei fractiuni usoare de acizi grasi, semiscindati,
care se saponifica usor, cu o solutie apoasa de NaOH, urmata de salifiere cu
NaCl. Sapunul pasta, astfel obtinut, se usuca in strat subtire, se sfarama
mecanic si se siteaza. Produsul obtinut poate fi utilizat ca atare, drept
detergent pt. spalare mecanica sau manuala, in amestec cu diversi aditivi
modificatori de proprietati vascodinamice si de suprafata.
|
6
|
http://www.cttecotech.ro/salon/postere/P453.png
|
0
|
454
|
Nica Gheorghe, Sandu Ion, Ciubotaru Ion, Vermesan Horatiu, Naum Eduard
Mihail, Sandu Irina Crina Anca
|
Compozitie lianta pentru aglomerarea produselor pulverulente
|
Inventia consta in realizarea unei compozitii liante pentru aglomerarea
produselor pulverulente, care cuprinde caolin, dextrina, carboximetilceluloza
si apa. Pentru realizarea unor produse de ardere, utilizate in procesele de
incalzire, se utilizeaza un liant constituit din 2…8% caolin, 0.5…2.5%
dextrina, 0.5…5% carboximetilceluloza si in rest apa.
|
6
|
http://www.cttecotech.ro/salon/postere/P454.pdf
|
0
|
455
|
Nichita Ion, Lazariuc Vitalie, Bernic Daniela, Otel Victor, Ceban Ruslan,
Rosca Dumitru, Marian Vitalie
|
Malaxeur pour le pétrissage de la pâte
|
Le malaxeur avec action périodique, par rapport au malaxeur traditionnel est
conçu pour le réglage automatique de la vitesse de travail et de la durée de
pétrissage en fonction de la viscosité de la pâte.
|
7
|
http://www.cttecotech.ro/salon/postere/P455.doc
|
0
|
456
|
Nicola G.
|
Procedeu pentru obtinerea unui adeziv pentru izolatii flexibile
termorezistente
|
Procedeu pentru obtinerea unui adeziv pentru izolatii flexibile
termorezistente prin condensarea triolilor alifatici cu acizi grasi din ulei
de tall.
|
6
|
http://www.cttecotech.ro/salon/postere/P456.png
|
0
|
457
|
Nicola G.
|
Procedeu pentru solubilizarea rasinilor fenolice
|
Procedeu pentru solubilizarea rasinilor fenolice intr-un amestec de solventi
la temperaturi de 65-75o C.
|
6
|
http://www.cttecotech.ro/salon/postere/P457.png
|
0
|
458
|
Nicola G.
|
Procedeu de obtinere a unui condensat melaminoformaldehidic, pentru materiale
stratificate sau prafuri de presare, utilizate in scopuri electrotehnice
|
Procedeu de obtinere a unui condensat melaminoformaldehidic, pentru materiale
stratificate sau prafuri de presare, utilizate in scopuri electrotehnice prin
condensarea unei melaminoformaldehide.
|
6
|
http://www.cttecotech.ro/salon/postere/P458.png
|
0
|
459
|
Nicola G.
|
Procedeu pentru obtinerea unor pelicule electroizolante depuse pe conductoare
metalice
|
Procedeu pentru obtinerea unor pelicule electroizolante depuse pe conductoare
metalice pe baza de fenol sau crezol si hidrocarbura aromatica alchilata si
un sistem de polimeri compusi din poliester amida, polihidantoina si rasina
fenolformaldehidica flexibilizata in prezenta de catalizatori clasici.
|
6
|
http://www.cttecotech.ro/salon/postere/P459.png
|
0
|
460
|
Nicola G.
|
Procedeu pentru obtinera unor terpolimeri pentru electrotehnica
|
Procedeu pentru obtinera unor terpolimeri pentru electrotehnica pe baza de
rasini crezolformaldehidica, achilfenolformaldehidica si epoxidica.
|
6
|
http://www.cttecotech.ro/salon/postere/P460.png
|
0
|
461
|
Nicola G.
|
Procedeu pentru obtinerea unor rasini poliesterice utilizabile in scopuri
electrotehnice
|
Procedeu pentru obtinerea unor rasini poliesterice utilizabile in scopuri
electrotehnice ca lacuri pentru lacuirea tesaturilor din clasa F.
|
6
|
http://www.cttecotech.ro/salon/postere/P461.png
|
0
|
462
|
Nicola G.
|
Procedeu pentru obtinerea unor prafuri de presare pentru piese de uz
electrotehnic
|
Procedeu pentru obtinerea unor prafuri de presare pentru piese de uz
electrotehnic, caracterizat prin aceea ca se condenseaza formaldehida cu
melamina iar polimerul obtinut se amesteca cu o umplutura.
|
6
|
http://www.cttecotech.ro/salon/postere/P462.png
|
0
|
463
|
Nicola G.
|
Procedeu pentru dizolvarea selacului
|
Procedeu pentru dizolvarea selacului la temperatura si solubilizare in
amestec de solventi.
|
6
|
http://www.cttecotech.ro/salon/postere/P463.png
|
0
|
464
|
Nicola G.
|
Procedeu pentru obtinerea rasinilor fenolformaldehidice utilizate in
electrotehnica
|
Procedeu pentru obtinerea rasinilor fenolformaldehidice utilizate in
electrotehnica prin procedeu de condensare intr-un amestec de solventi.
|
6
|
http://www.cttecotech.ro/salon/postere/P464.png
|
0
|
465
|
Nicola G.
|
Procedeu pentru prepararea unei rasini poliesterice pentru lacuri de inalta
flexibilitate
|
Procedeu pentru separarea unei rasini polesterice pentru lacuri de inalta
flexibilitate destinate fabricarii izolatiilor flexibile cu suport de
tesaturi organice sau anorganice.
|
6
|
http://www.cttecotech.ro/salon/postere/P465.png
|
0
|
466
|
Nicola G.
|
Procedeu de obtinere de materiale stratificate rulate, cu proprietati mecanice
superioare
|
Inventia se refera la un procedeu de obtinere a unor materiale stratificate,
rulate, cu proprietati mecanice superioare, folosite in constructia
motoarelor masinilor cu performante inalte.
|
3
|
http://www.cttecotech.ro/salon/postere/P466.ppt
|
0
|
467
|
Nicola G. s.a.
|
Procedeu de obtinere a unor rasini crezolo-formaldehidice pentru
electrotehnica
|
Procedeu de obtinere a unor rasini crezolo-formaldehidice pentru electrotehnica
si care pot fi folosite ca atare sau componenta corectanta la fabricarea
materialelor electroizolante.
|
6
|
http://www.cttecotech.ro/salon/postere/P467.png
|
0
|
468
|
Nicola G. s.a.
|
Procedeu pentru obtinerea unor adezivi epoxidici
|
Procedeu pentru obtinerea unor adezivi epoxidici prin reticularea cu o amina
aromatica solida si topirea la o temperatura superioara celei a aminei dupa
care se toarna in forme si se reticuleaza la 60-90o C.
|
6
|
http://www.cttecotech.ro/salon/postere/P468.png
|
0
|
469
|
Nicola G. s.a.
|
Procedeu pentru obtinerea unui lac de acoperire pentru izolatii de inalta
flexibilitate
|
Procedeu pentru obtinerea unui lac de acoperire pentru izolatii de inalta
flexibilitate ca suport, tesaturi din fibre organice, anorganice in special
fire de sticla pentru obtinerea unor produse izolante.
|
6
|
http://www.cttecotech.ro/salon/postere/P469.png
|
0
|
470
|
Nicola G. s.a.
|
Procedeu pentru obtinerea de prepolimeri pentru lacuri electroizolante
|
Procedeu pentru obtinerea de prepolimeri pentru lacuri electroizolante prin
condensarea acidului adipic cu glicoli in prezenta acetatului de zinc.
|
6
|
http://www.cttecotech.ro/salon/postere/P470.png
|
0
|
471
|
Nicola G. s.a.
|
Suporturi lacuite pentru cilindrii electroizolanti
|
Suporturi lacuite pentru cilindrii electroizolanti pe baza de hartie
electroizolanta tip sulfat satinata si rasina epoxidica.
|
6
|
http://www.cttecotech.ro/salon/postere/P471.png
|
0
|
472
|
Nicola G. s.a.
|
Procedeu pentru obtinerea unui adeziv pentru scopuri electrotehnice
|
Procedeu pentru obtinerea unui adeziv pentru scopuri electrotehnice pe baza
de poliester liniar solid intr-un amestec de solventi.
|
6
|
http://www.cttecotech.ro/salon/postere/P472.ppt
|
0
|
473
|
Nicola G. s.a.
|
Procedeu de preparare a unei rasini melaminoformaldehidica
|
Procedeu de preparare a unei rasini melaminoformaldehidica caracterizata prin
continut scazut de formaldehida libera.
|
6
|
http://www.cttecotech.ro/salon/postere/P473.png
|
0
|
474
|
Nicola G. s.a.
|
Procedeu de obtinere de lacuri pentru materiale stratificate cu inalte
proprietati dielectrice
|
Procedeu de obtinere de lacuri pentru materiale stratificate cu inalte
proprietati dielectrice, pe baza de rasini crezolformaldehidice reticulate cu
urotropina si modificate cu rasini epoxi.
|
6
|
http://www.cttecotech.ro/salon/postere/P474.png
|
0
|
475
|
Nicola G. s.a.
|
Procedeu pentru obtinerea de rasini fenoloformaldehidice pentru materiale
stratificate electrotehnice
|
Procedeu pentru obtinerea de rasini fenoloformaldehidice pentru materiale
stratificate electrotehnice prin condensarea formaldehidei cu fenolul sau
alchilfenolul .
|
6
|
http://www.cttecotech.ro/salon/postere/P475.png
|
0
|
476
|
Nicola G. s.a.
|
Procedeu pentru obtinerea unui adeziv pentru stratificate placate cu cupru
|
Procedeu pentru obtinerea unui adeziv pentru stratificate placate cu cupru pe
baza de rasini fenoformaldehidic epoxidice flexibilizate cu cauciuc nitrilic.
|
6
|
http://www.cttecotech.ro/salon/postere/P476.png
|
0
|
477
|
Nicola G. s.a.
|
Adeziv pentru izolatii flexibile in electrotehnica
|
Adeziv pentru izolatii flexibile in electrotehnica pe baza de rasini
fenoformaldehidic epoxidice flexibilizate si cauciuc.
|
6
|
http://www.cttecotech.ro/salon/postere/P477.png
|
0
|
478
|
Nicola G. s.a.
|
Procedeu de obtinere a unui lac pentru materiale stratificate si pentru
prafuri de presare
|
Procedeu de obtinere a unui lac pentru materiale stratificate si pentru
prafuri de presare din rasini fenolformaldehidice modificate cu rasini
epoxidice.
|
6
|
http://www.cttecotech.ro/salon/postere/P478.png
|
0
|
479
|
Nicola G. s.a.
|
Procedeu de obtinere a unui lac de impregnare pentru scopuri electrotehnice
|
Procedeu de obtinere a unui lac de impregnare pentru scopuri electrotehnice
pe baza de rasini epoxidice modificate cu rasini fenolformaldehidice.
|
6
|
http://www.cttecotech.ro/salon/postere/P479.png
|
0
|
480
|
Nicola G. s.a.
|
Procedeu pentru obtinerea de conductori electroizolanti
|
Procedeu pentru obtinerea de conductori electroizolanti cu inalte proprietati
electrice si mecanice, utilizate la constructia bobinajelor.
|
6
|
http://www.cttecotech.ro/salon/postere/P480.png
|
0
|
481
|
Nicola G. s.a.
|
Amestec de solventi pentru solubilizarea rasinii epoxifenolformaldehidice
|
Amestec de solventi pentru solubilizarea rasinii epoxifenolformaldehidice
utilizabil in industria electrotehnica continand alcooli alifatici inferiori
.
|
6
|
http://www.cttecotech.ro/salon/postere/P481.png
|
0
|
482
|
Nicola G. s.a.
|
Amestec de solventi pentru solubilizarea polimerilor utilizabili la
acoperirea conductorilor electrici
|
Amestec de solventi pentru solubilizarea polimerilor utilizabili la
acoperirea conductorilor electrici din constructia masinilor si aparatelor
electrice.
|
6
|
http://www.cttecotech.ro/salon/postere/P482.png
|
0
|
483
|
Nicola G..
|
Procedeu de obtinere a unor prafuri de presare si materiale stratificate
folosite in scopuri electrotehnice
|
Procedeu de obtinere a unor prafuri de presare si materiale stratificate
folosite in scopuri electrotehnice din rasini melaminoformaldehidice
modificate cu rasini fenolformaldehidice cu umpluturi organice sau
anorganice.
|
6
|
http://www.cttecotech.ro/salon/postere/P483.png
|
0
|
484
|
Nicola G..
|
Procedeu pentru fabricarea unor materiale stratificate pentru scopuri
electrotehnice
|
Procedeu pentru fabricarea unor materiale stratificate pe suport de hartie
pentru scopuri electrotehnice.
|
6
|
http://www.cttecotech.ro/salon/postere/P484.png
|
0
|
485
|
Nicola G..
|
Procedeu de obtinere de solutii terpolimere pentru materiale stratificate
|
Procedeu de obtinere de solutii terpolimere pentru materiale stratificate pe
baza de rasini melaminoformaldehidice si solutii in amestec toluen-alcool de
rasina crezoloformaldehidica.
|
6
|
http://www.cttecotech.ro/salon/postere/P485.png
|
0
|
486
|
Nicola Grigore
|
Stratificat electroizolant
|
Inventia se refera la un material stratificat, electroizolant, cu mare
rezistenta la flacara si la arcul electric, cu proprietati dielectrice
superioare si care nu adera la talerele între care se preseaza.
|
2
|
http://www.cttecotech.ro/salon/postere/P486.png
|
0
|
487
|
Nicola Grigore
|
Procedeu de obtinere a unor lacuri pentru materiale stratificate de izolatie
|
Prezenta inventie se refera la un procedeu de obtinere a unor lacuri pentru
materiale stratificate de izolatie.
|
2
|
http://www.cttecotech.ro/salon/postere/P487.ppt
|
0
|
488
|
Nicola Grigore
|
Procedeu de obtinere a unor lacuri pentru industria electrotehnica
|
Prezenta inventie se refera la un procedeu de obtinere a unor lacuri pentru
industria electrotehnica.
|
2
|
http://www.cttecotech.ro/salon/postere/P488.ppt
|
0
|
489
|
Nicola Grigore
|
Procedeu de obtinere a unui material stratificat, electroizolant, cu
proprietati mecanice, superioare
|
Prezenta inventie se refera la un procedeu de obtinere a unui material
stratificat, electroizolant, cu proprietati mecanice, superioare.
|
2
|
http://www.cttecotech.ro/salon/postere/P489.doc
|
0
|
490
|
Alin Olaru, Ciprian Constantin
|
Elemente de electrocinetica
|
|
2
|
|
0
|
491
|
Nicola Grigore
|
Instalatie pentru izolarea conductoarelor electrice
|
Prezenta inventie se refera la obtinerea unei instalatii pentru izolarea
conductoarelor electrice
|
2
|
http://www.cttecotech.ro/salon/postere/P491.doc
|
0
|
492
|
Nicola Grigore
|
Lac de impregnare melamine-fenolformaldehidic-epoxidic pentru prafuri de
presare si stratificante electroizolante
|
Prezenta inventie se refera la un lac de impregnare
melamine-fenolformaldehidic-epoxidic pentru prafuri de presare si
stratificante electroizolante, recomandate in industria constructoare de
masini si aparate electrice cu inalta rezistenta la arcul electric, bune
proprietati la 130°C si medii cu umiditate ridicata.
|
6
|
http://www.cttecotech.ro/salon/postere/P492.png
|
0
|
493
|
Nicola Grigore, Calugaru Gheorghe
|
Procedeu pentru obtinerea unor rasini fenolformaldehidice flexibilizate,
utilizabile la fabricarea materialelor stratificate
|
Prezenta inventie se refera la un procedeu pentru obtinerea unor rasini
fenolformaldehidice flexibilizate, utilizabile la fabricarea materialelor
stratificate, cu inalte proprietati bielectrice, cu o buna comportare la
stantare, la temperature ambianta.
|
6
|
http://www.cttecotech.ro/salon/postere/P493.png
|
0
|
494
|
Nicola Grigore, Calugaru Gheorghe, Hanciu Bucur
|
Procedeu de obtinere a unor rasini epoxid-fenolformaldehidice, utilizabile in
industria electrotehnica
|
Prezenta inventie se refera la un procedeu de obtinere a unor rasini
epoxid-fenolformaldehidice, utilizabile in industria electrotehnica la
fabricarea de mase de presare si materiale stratificate electroizolante.
|
6
|
http://www.cttecotech.ro/salon/postere/P494.png
|
0
|
495
|
Nicola Grigore, Calugaru Gheorghe, Simionescu Petre
|
Procedeu pentru obtinerea unor polimeri fenolformaldehidici pentru uz
electrotehnic
|
Prezenta inventie se refera la obtinerea unor polimeri fenolformaldehidici cu
inalte proprietati pentru electronica, recomandati pentru fabricarea de
materiale stratificate si mase de presare.
|
6
|
http://www.cttecotech.ro/salon/postere/P495.png
|
0
|
496
|
Nicola Grigore, Popescu Alexandria
|
Procedeu pentru obtinerea unui terpolimer melaminofenolformaldehidic
polioximetilenic
|
Prezenta inventie se refera la un procedeu a obtinerea unui terpolimer
melaminofenolformaldehidic polioximetilenic utilizat ca liant pentru
fabricarea de materiale stratificate si mase de presare.
|
6
|
http://www.cttecotech.ro/salon/postere/P496.png
|
0
|
497
|
Nicola Grigore, Simionescu Petre
|
Amestec de obtinere a unei rasini melaminoformaldehidice
|
Prezenta inventie se refera la un procedeu de obtinere a unei rasini
melaminoformaldehidice modificate, utilizata ca liant polimer in industria
electrotehnica.
|
6
|
http://www.cttecotech.ro/salon/postere/P497.png
|
0
|
498
|
Nicola Grigore, Sonfelean Mihail
|
Procedeu pentru fabricarea de materiale stratificate placate pentru circuite
imprimate
|
Prezenta inventie se refera la un procedeu de materiale stratificatre placate
cu Cupru sau Aluminiu, cu inalte calitati, cu suport organic pentru
fabricarea circuitelor imprimate.
|
2
|
http://www.cttecotech.ro/salon/postere/P498.ppt
|
0
|
499
|
Nicola Grigore, Sonfelean Mihail, Radu Ion, Lungu Constantin
|
Procedeu de obtinere a unor prafuri de presare folosite in scopuri
electronice
|
Prezenta inventie se refera la procedeu de obtinere a unor prafuri de presare
cu inalta rezistenta la arcul electric, bune proprietati la temperature si
umiditate ridicata.
|
2
|
http://www.cttecotech.ro/salon/postere/P499.ppt
|
0
|
500
|
Nicola Grigore, Teodosie Adrian, Belu Constantin, Stan Dumitru
|
Procedeu pentru obtinerea de conductori izolati
|
Prezenta inventie se refera la un procedeu pentru obtinerea de conductori
electrici izolati cu propreitati mecanice, electrice si termice superioare in
conditii normale, la temperatura, umiditate si agenti chimici.
|
2
|
http://www.cttecotech.ro/salon/postere/P500.ppt
|
0
|
501
|
Niculae Luminita, Godeanu Marioara
|
Procedeu pentru inmultirea si conservarea in vitro, a plantei Pistia
Stratiotes
|
Inventia se refera la un procedeu pentru inmultirea si conservarea, in
vitro, a plantei Pistia stratiotes, folosita pentru obtinerea de
biomasa, extract proteic, preparate biologic active, biogaz si pentru
epurarea biologica a apelor uzate orasenesti, agrozootehnice si industriale.
|
1
|
http://www.cttecotech.ro/salon/postere/P501.png
|
0
|
502
|
Niederkorn Ioan, Matyas Carol, Vacariu Vintila Teodoru, Mathe Rozalia
|
Procedeu de recuperare a niobiului, tantalului si titanului din solutii acide
complexe
|
The acid solution obtained after the ore treatment with H2SO4
contains as useful elements Nb, Ta and Ti in low concentrations beside Fe and
Al. In order to separate Nb, Ta and Ti as a rich collective concentrate the
solution is neutralized to the pH =3.5-4 after the Fe3+ reduction
to Fe2+ followed by a selective dissolution of Al and Fe by its
treatment with sulphuric acid at pH=2.5. The niobium, tantalum and titanium
concentration is increasing 10 to 20 times in the final product.
|
5
|
http://www.cttecotech.ro/salon/postere/P502.png
|
0
|
503
|
Niederkorn Ioan, Vacariu Vintila Teodoru, Georgescu Dan, Matyas Carol, David
Boris, Hostuc Petre, Circo Gheorghe, Fratila Nicolae, Mathe Rozalia, Iorga
Ileana
|
Procedeu de valorificare complexa a unor minereuri de metale rare
|
The ore is processed using physical and chemical
procedures. The ore is grinded followed by a sludge removing stage and then
by flotation with a view to separating a zirconium-bearing concentrate. The
sludge, the low magnetic product and the zirconium-bearing concentrate is
leached via sulphatation. A collective concentrate of niobium, titanium, rare
earths, thorium and uranium hydroxides is separated from the solution. A
zirconium concentrate is obtained from the solid residuum.
|
5
|
http://www.cttecotech.ro/salon/postere/P503.png
|
0
|
504
|
Nisipeanu Elisabeta Steluta , Raluca Aurora Stepa
|
Procédé d’insolubilisation des résidus galvaniques utilisand autres types de
dechets
|
L’insolubilisation des métaux lourds résultés des résidus en utilisant les
déchets provenant de la soudure au chalumeau oxyacétilénique tout comme du
sablaje
|
1
|
http://www.cttecotech.ro/salon/postere/P504.png
|
0
|
505
|
Nisipeanu S. , I. Iorga
|
Filtre humide ? mousse
|
Rétention et neutralisation des substances nuisibles en solutions chimiques
|
1
|
http://www.cttecotech.ro/salon/postere/P505.png
|
0
|
506
|
Nisipeanu Steluta Elisabeta
|
Complex cleaning system of the emissions with powder and exhaust gas content
|
Significant pollution control meant for limiting and/or eliminating
pollution;Avoidance of polluting agents transfer from air into the water and
soil;Simultaneous retention of powders and gaseous pollutants with low investments
and minimum exploitation costs;
|
1
|
http://www.cttecotech.ro/salon/postere/P506.png
|
0
|
507
|
Nisipeanu Steluta Elisabeta
|
Composition d’encapsulation du metaux toxiques de dechets
|
La neutralisation concomitante des trois types de déchets avec de l’impact
sur l’environnement: résidus résultés ŕ la galvanisation (trés toxiques); résidus provenant de la
soudure au chalumeau oxyacétilénique; résidus de sablage. Le matériel ainsi
résulté peut étre valorisé dans le domaine du bâtiment. Des matičres premičres non-toxiques. Une technologie
pouvant étre appliquée sans difficulté.
|
1
|
http://www.cttecotech.ro/salon/postere/P507.png
|
0
|
508
|
Nita Petru, Zamarca Stefan, Ilies Paul
|
Suport metalic pentru filtre catalitice
|
Suport metalic pentru filtre catalitice prin care se purifica gazele de
evacuare de la motoare cu ardere interna. Metallic support for catalytic
filters This metallic support is used to produce catalytic filters to clean
the exhausting gases from the internal combustion engines. A catalytic filter
having a metallic support has been tested and was found in accordance with
Euro laws.
|
3
|
http://www.cttecotech.ro/salon/postere/P508.png
|
3
|
509
|
Nitescu Eftimie
|
Filtru de aer mecano-hidrauliac
|
The factory chimney are equipped with a mobil filter, a continuous system for
cleaning and collection-evacuation system.
|
1
|
http://www.cttecotech.ro/salon/postere/P509.png
|
0
|
510
|
Nitescu Eftimie
|
Incalzitor solar pentru apa, potabil si flexibil
|
The solar heating is like a flexible curtain which is exposed to sun and
connected with a water tank.
|
1
|
http://www.cttecotech.ro/salon/postere/P510.png
|
0
|
511
|
Nitescu Eftimie
|
Solutie tehnica si tehnologie pentru instalarea contoarelor de ape uzate fara
intreruperea functionarii retelei de canalizare
|
The technology and device permit to set up meters without interrupt waste
water canals.
|
1
|
http://www.cttecotech.ro/salon/postere/P511.png
|
0
|
512
|
Nitescu Eftimie
|
Aparat pentru protectia sanitara a operatorilor ce lucreaza cu masini de
numarat bani
|
Device which are cleaning air from bank –note counting machine.
|
1
|
http://www.cttecotech.ro/salon/postere/P512.png
|
0
|
513
|
Nitescu Eftimie
|
Aspirator cu dezinfectie- ASPIROSEPT
|
Vacuum cleaner and disinfectant for surfaces from hospitals
|
1
|
http://www.cttecotech.ro/salon/postere/P513.png
|
0
|
514
|
Nitescu Eftimie
|
Sistem de recuperare a energiei din gazele de esapament
|
Device fitted on exhausting pipe which transform thermal energy in electric
energy.
|
1
|
http://www.cttecotech.ro/salon/postere/P514.png
|
0
|
515
|
Nitescu Eftimie
|
Sistem constructiv de captare –filtrare-evacuare-a gazelor de esapament
pentru intersectii aglomerate
|
Arrangement for capture, filtering and evacuation of exhausting gases from
intersections.
|
1
|
http://www.cttecotech.ro/salon/postere/P515.png
|
0
|
516
|
Nitescu Eftimie
|
Sistem de irigare si incalzire cu ape geotermale
|
Pressure flow adjusting using an elastic sleeve fitted on two diaphragms.
|
1
|
http://www.cttecotech.ro/salon/postere/P516.png
|
0
|
517
|
Nitescu Eftimie
|
Instalatie automata pentru desalinizarea terenurilor poluate
|
Electronic block and transducers for water and soils with the purpose to
optimize and command desalination process.
|
1
|
http://www.cttecotech.ro/salon/postere/P517.png
|
0
|
518
|
Nitescu Eftimie
|
Grup sanitar ecologic, mobil
|
Ecological sanitary group, functional independent.
|
1
|
http://www.cttecotech.ro/salon/postere/P518.png
|
0
|
519
|
Nitescu Eftimie
|
Cabina ecologica pentru fumatori
|
Ecological box for smokers.
|
1
|
http://www.cttecotech.ro/salon/postere/P519.png
|
0
|
520
|
Nitescu Eftimie
|
Instalatie pentru semnalizarea prezentei vehiculelor in curbele periculoase
fara vizibilitate
|
Installation consists from: a panel on which appear the image of a machine, a
transducer installed in the traffic lane and a system to transmit the
informations to the panel.
|
2
|
http://www.cttecotech.ro/salon/postere/P520.png
|
0
|
521
|
Nitescu Eftimie
|
Tehnologie si masina pentru executie in timp real a ecranelor antiinundatie
|
Mechanical equipment which are embedding in soil a flexible antiflood screen
|
3
|
http://www.cttecotech.ro/salon/postere/P521.png
|
0
|
522
|
Nitescu Eftimie
|
Supapa hidraulica filtranta cu autocuratire
|
The valve is fitted with a selfcleaning filter
|
3
|
http://www.cttecotech.ro/salon/postere/P522.png
|
0
|
523
|
Nitescu Eftimie
|
Baterie de filtrare cu tratarea magnetica a combustibililor lichizi sau
gazosi
|
Fuels filter combined with a magnetic matrix with the purpose to activate
fluid.
|
3
|
http://www.cttecotech.ro/salon/postere/P523.png
|
0
|
524
|
Nitescu Eftimie
|
Regulator de presiune si debit pentru instalatiile de irigatie
|
Pressure flow adjusting using an elastic sleeve fitted on two diaphragms.
|
3
|
http://www.cttecotech.ro/salon/postere/P524.png
|
0
|
525
|
Nitescu Eftimie
|
Conducta magnetica
|
Magnetic pipe for activating fluids.
|
4
|
http://www.cttecotech.ro/salon/postere/P525.png
|
0
|
526
|
Nitescu Eftimie
|
Instalatie si tehnologie pentru executarea in pamant a ecranelor verticale
flexibile
|
The installation are excavate a ditch where could be introduced, mechanical,
a verticale flexible membrane
|
4
|
http://www.cttecotech.ro/salon/postere/P526.png
|
0
|
527
|
Nitescu Eftimie, Nitescu Diana
|
Microhidrocentrala portabila
|
Spherical, compact mycrohydroelectric station, installed on rivers.
|
4
|
http://www.cttecotech.ro/salon/postere/P527.png
|
0
|
528
|
Nitescu Eftimie, Selig C.
|
Sistem de captare cu pompare-filtrare pentru apa de mare
|
Capture with filter, pump driver by waves energy for pump imp see water on
shore, for sanitation and swimming pools.
|
4
|
http://www.cttecotech.ro/salon/postere/P528.png
|
0
|
529
|
Nitescu Eftimie
|
Echipament pentru introducerea cablurilor si drenurilor in pamant
|
Mechanical equipment mounted on tractors, which introduce in soil, electrical
cables and drainage tubs without excavation.
|
4
|
http://www.cttecotech.ro/salon/postere/P529.png
|
0
|
530
|
Nitescu Eftimie, Popescu S.
|
Dispozitiv pentru masurarea debitelor de fluide
|
Adjusting diaphragm witch permit precise measurement of variable flows
|
4
|
http://www.cttecotech.ro/salon/postere/P530.png
|
0
|
531
|
Nitescu Eftimie, Van Cotthem W., Craciun V.
|
Tehnologie si masina pentru cultivarea terenurilor aride si neproductive
|
The cultivation is made with a special machine which introduce into soil a
continuous biodegradable belt, forming 1 up to 5 rows.
|
9
|
http://www.cttecotech.ro/salon/postere/P531.png
|
0
|
532
|
Nitescu Eftimie
|
Dispozitiv magnetic pentru activarea apei folosite la udarea plantelor
|
The device consist from a magnetic matrix through which circulate irrigation
water.
|
9
|
http://www.cttecotech.ro/salon/postere/P532.png
|
0
|
533
|
Nitescu Eftimie, Iosub N., Chiorescu E.
|
Tehnologie pentru plantarea semintelor de arbori in capsule
|
The cultivation is made by sowing machines which introduce in soil the
capsules
|
9
|
http://www.cttecotech.ro/salon/postere/P533.png
|
0
|
534
|
Nitescu Eftimie
|
Sistem si tehnologie de irigare subterana a pomilor
|
Absorbing system of columns for water and fertilizers for trees.
|
9
|
http://www.cttecotech.ro/salon/postere/P534.png
|
0
|
535
|
Nitescu Eftimie
|
Dispozitiv de picurare cu activare magnetica
|
Magnetic matrix with constructive and functional purpose for sprinklers
|
9
|
http://www.cttecotech.ro/salon/postere/P535.png
|
0
|
536
|
Nitescu Eftimie, Van Cotthem W., Chiorescu E.
|
Banda hidroameliorativa, suport pentru cultivarea terenurilor neproductive
|
Hydroameliorativ support from plants cultivation on arid soils.
|
9
|
http://www.cttecotech.ro/salon/postere/P536.png
|
0
|
537
|
Nitescu Eftimie
|
Echipament de protectie si supravietuire a unei persoane surprinse in
avalansa de zapada
|
Portable equipment for protection in case of avalanche
|
11
|
http://www.cttecotech.ro/salon/postere/P537.png
|
0
|
538
|
Nitescu Eftimie, Pantelimonescu M.
|
Aparat pentru recuperare medicala si antrenamentul gimnastilor
|
Portable device for training and measuring the hands force.
|
11
|
http://www.cttecotech.ro/salon/postere/P538.png
|
0
|
539
|
Nitescu Eftimie
|
Pantof medicinal pentru preso-magneto-punctura
|
Shoes equipped with preso-magnetic-punching device.
|
11
|
http://www.cttecotech.ro/salon/postere/P539.png
|
0
|
540
|
Nitescu Eftimie, Craciun V.
|
Vagon de cale ferata destinat persoanelor cu handicap fizic
|
Railway wagon adapted for handicap persons.
|
15
|
http://www.cttecotech.ro/salon/postere/P540.png
|
0
|
541
|
Nitescu Eftimie
|
Aparat pentru antrenament sportiv tip skanderbeg
|
Device from training and measuring the force of Skanderbeg probationers.
|
17
|
http://www.cttecotech.ro/salon/postere/P541.png
|
0
|
542
|
Nitescu Eftimie, Andrei C.
|
Saltea absorbanta pentru eliminarea excesului de apa de pe terenurile de
sport
|
Flexible mattress for absorption excess humidity from sport stadiums.
|
17
|
http://www.cttecotech.ro/salon/postere/P542.png
|
0
|
543
|
Onofras Leonid, Voloscov Margarita, Todiras Vasile, Iachimov Maria
|
Tulpina de bacterii de nodozitati rhizobium japonicum pentru prelucrarea
semintelor de soia
|
Inventia se refera la agricultura si anume la mijloacele microbiologice de
sporire a recoltei plantelor de soia.Esenta inventiei consta în aceea ca se
propune tulpina de bacterii de nodozitati Rhizobium japonicum CNM-RB-01
pentru prelucrarea semintelor de soia, care poseda o capacitate înalta de
fixare a azotului atmosferic.Utilitatea inventiei consta în majorarea
capacitatii azotofixatoare a sistemului rizobio- radicular, sporirea recoltei
de boabe si ameliorarea calitatilor nutritive ale acestora.
|
9
|
http://www.cttecotech.ro/salon/postere/P543.ppt
|
0
|
544
|
Oprea Cleopatra, Sandu Ion, Calu Nicolae, Ivascan Stefan, Constantinescu
Alexandru, Luputiu Mircea
|
Procedeu de imobilizare a electrolitului din elemente galvanice uscate tip
Leclanche
|
Se descrie procedeul de imobilizare a electrolitului din elemente galvanice
uscate tip Leclanche
|
6
|
http://www.cttecotech.ro/salon/postere/P544.gif
|
0
|
545
|
Oprea Cleopatra, Calu Nicolae, Sandu Ion, Constantinescu Cristian Alexandru,
Luputiu Mircea Gheorghe, Popa Liviu Mihai-Eugen
|
Procedeu de realizare a compartimentului electrolitic din structura
bateriilor mercurice
|
Se descrie procedeul de realizare a compartimentului electrolitic din
structura bateriilor mercurice
|
6
|
http://www.cttecotech.ro/salon/postere/P545.gif
|
0
|
546
|
Oprea Letitia, Radulescu Gheorghe, Brad Ion, Moise Maria Ioana, Bitea
Claudia, Moise George
|
Compozitie pentru stimularea activitatii vitale a organismului animal
|
Inventia se refera la o compozitie pentru stimularea activitatii vitale a
organismului animal, pentru toate speciile si categoriile de animale si
pasari, constituita din: 6% germeni de grau, 12% germeni de porumb, 34 %
tarate de grau, 4% catina alba delipidizata, 4% glucoza, 40% drojdie de bere.
|
7
|
http://www.cttecotech.ro/salon/postere/P546.png
|
0
|
547
|
OU Pintmann Grupp Estonia
|
Diagnostic and treatment of sleep disorder breathing
|
Diagnostics and treatment of sleep disordered breathing (sleep apnea) with
the help of polysomnography and continuous positive airway pressure devices
(CPAP devices).
|
11
|
|
0
|
548
|
Pacaleanu Constantin
|
Diluant ecologic DILUP
|
Prezenta inventie se refera la un diluant ecologic a carui compozitie
dintr-un amestec de solventi cu volatilitate si compozitie controlate si bine
echilibrate. Este utilizat atat ca diluant in industria lacurilor si a
vopselelor, cat si ca degresant pentru rulmenti, diferite piese auto si
suprafete. Acest diluant ecologic asigura lacurilor si vopselelor o
fluiditate superioara, fara a le modifica proprietatile de baza. Este
recomandata folosirea acestuia intr-un mediu de lucru ce impune conditii
ecologice de utilizare.
|
6
|
http://www.cttecotech.ro/salon/postere/P548.png
|
0
|
549
|
Pacaleanu Constantin
|
Miere superioara antistres
|
Este un produs natural caruia i s-au adaugat diverse componente si
ingrediente menite sa-i imbunateasca calitatile initiale. Combate eficient
stresul, poluarea si alimentatia defectuaoasa la nivelul organismului uman.
Imbunatate rezistenta naturala a organismului, reduce oboseala fizica si
mentie tonusul, puterea de munca si capacitatea de concentrare
|
7
|
http://www.cttecotech.ro/salon/postere/P549.png
|
0
|
550
|
Pacaleanu Constantin
|
Suplimente nutritionale antifitoterapeutice
|
Proprietatile binecunoscute ale mierii poliflore au fost combinate cu
pricipiile active continute de plantele medicinale pentru a se pune in
valoare adevaratele calitati ale suplimentelor nutritionale
apifitoterapeutice. Sunt produse naturale carora li s-au adaugat diverse
componente si ingrediente menite sa asigure si sa garanteze in primul rand
sanatatea celor ce le consuma, precum si calitatea produselor oferite.
Astfel, acestea asigura aportul de vitamine, minerale, proteine si alte
microelemente atat de necesare organismului uman. In functie de scopul pentru
care au fost create, acestea combat eficient stresul si alimentatia
defectuoasa la nivelul organismului uman, imbunatate starea generala a
organismului sau mentine tonusul, puterea de munca si capacitatea de
concentrare
|
7
|
http://www.cttecotech.ro/salon/postere/P550.png
|
0
|
551
|
Pahteanu B. s.a.
|
Mandrina autocentranta cu bacuri pentru scule aschietoare si rotopercutoare
|
Mandrine self-centre has jaws for some tools have toc ut up and
rotopercutants. The mandine characterizes by three jaws who, thanks to their
shape has ten on, permits the simultaneous bringing togheter has the aide one
muff and one annular spring.
|
3
|
http://www.cttecotech.ro/salon/postere/P551.png
|
0
|
552
|
Pahteanu B. s.a.
|
Instalatie hidraulica pentru masini unelte
|
Hydraulic installation for machine-tools invention refers to a structure with
hydrostatic elements and regulators of debit side, which can accomplish
numerous working cycles, automatisables, by pressure forced constant
controlled.
|
3
|
http://www.cttecotech.ro/salon/postere/P552.png
|
0
|
553
|
Pahteanu B. s.a.
|
Instalatie de sablare
|
Using the quartz in throwing of air like middle of sablage compresses, the
installation assures: The sablage of the pieces of type disk, tree and
complex, has continuous rotation in the machining. The system answers to the
ecological norms in assuring the insulated separation. The precise control of
process by the dosage in a system double ejector of mass abrasive.
|
3
|
http://www.cttecotech.ro/salon/postere/P553.png
|
0
|
554
|
Pahteanu B. s.a.
|
Freza melc pentru prelucrarea riflurilor pe valturi cilindrice
|
Cutting Tool for Continuous Rolling processing Of the Small Pitch Grooves
Worm milling cutter having the teeth tipped with changeable profiled plates
fixed on the cutter on an helical channel and having a pitch whose value is
that of the multiple groove pitch which ensure the jump processing over a
number of grooves.
|
3
|
http://www.cttecotech.ro/salon/postere/P554.png
|
0
|
555
|
Pahteanu B. s.a.
|
Freza melc modul pentru finisare cu dinti demontabili armati si ascutire
continua
|
Milling helicoidal tool outilest constructs two conical helical bodies fixed
on a bradawl; teeth to be cut up being established in the helical turns, they
allow division duprofil generative as their own installation in working
position and for uninterrupted grinding.
|
3
|
http://www.cttecotech.ro/salon/postere/P555.png
|
0
|
556
|
Pahteanu B. s.a.
|
Freza cilindro-frontala cu placute aschietoare schimbabile si reglabile
|
The invention consists in a milling tool with round cutting plaques that has
the ability to rotate and to be adjusted, permitting an increased durability.
|
3
|
http://www.cttecotech.ro/salon/postere/P556.png
|
0
|
557
|
Pahteanu B. s.a.
|
Freza cu un dinte pentru prelucrarea rotilor melcate
|
Helical milling cutter has unique tooth helical milling cutter has unique
tooth in micrometric regulating of the position of the tooth of cup, having
accomplished by the rotation of an eccentric shell and in fixing with a
frontal coupling in teeth and fine regulating with micrometric screw.
|
3
|
http://www.cttecotech.ro/salon/postere/P557.png
|
0
|
558
|
Pahteanu B. s.a.
|
Scula, bara de alezat multifunctionala cu amortizor de vibratii
|
Tool, bar of alesage, poly functional, with damper. creation will get used
has a tool of tower of body variable decoupe, before differentes functions
has; these bodies are install has double reglage and fixing mecanique on a
suport blocks with damper and refroidissment interieur.
|
3
|
http://www.cttecotech.ro/salon/postere/P558.png
|
0
|
559
|
Pandur Teodor, Godeanu Marioara, Naftanaila Aurelian, Iulian Constantin,
Galita Ion
|
Instalatie biotehnologica complexa de epurare a apelor uzate agrozootehnice,
obtinere de fitomasa si producere de rasaduri legumicole
|
Se descrie instalatia biotehnologica complexa de epurare a apelor uzate
agrozootehnice, obtinere de fitomasa si producere de rasaduri legumicole
|
1
|
http://www.cttecotech.ro/salon/postere/P559.png
|
0
|
560
|
Panturu E., Georgescu P.D., Filip Gh., Radulescu R., Florian A.
|
Procedeu de recuperare a uraniului din lesiile uranifere acide prin schimb
ionic si carbonatarea eluatilor uraniferi
|
The present invention describes an uranium recovery
procedure from acidic uranium leaches using ion exchange and uranium elutes
neutralization using sodium carbonate solution. The procedure according to
the invention consist of uranium selective adsorption, from acidic uranium
leaches, on strong basic anionic ion exchanging resins. Uranium is eluted
from the resin with a nitric eluent (solution 0.1 N HNO3 + 0.9 N NH4NO3),
the resulted uranium elute is neutralized with sodium carbonate at pH=8.5,
with a view to precipitating the metallic impurities. Uranium is precipitated
from the purified elute with NaOH as DUNa, which is filtrated, washed and
dried at a moisture less then 5% H2O.
|
5
|
http://www.cttecotech.ro/salon/postere/P560.png
|
0
|
561
|
Panturu E., Georgescu P.D., Florian A., Petrescu S., Filip Gh., Radulescu R.,
Iuhas T.F., Muntean I., Vasile C.
|
Procedeu de recuperare a uraniului din minereuri uranifere, prin lesiere
acida
|
The present invention describes an uranium recovery
procedure using acid leaching of uranium mineralization represented by the
pitchblende intimately associated with bitumen. The procedure according to
the invention consist of uranium ore enrichment process using radiometric
sorting , operation which removes from the ore input 23-26% sterile. The
uranium enriched ore is wet-grinded in two-stage process and then the
resulted slurry is thickened to a ratio S/L=1/1. The thickened slurry is
leached with sulfuric acid in two-stage process , at 60oC and then is
filtered. Uranium recovery from clarified leaches is carried out in two
stages: solutions purification using neutralization with sodium carbonate
solution and their enrichment using ion exchange. The uranium is precipitated
from elutes as DUNA, which is washed via settlement-filtration, drying and
then is stored.
|
5
|
http://www.cttecotech.ro/salon/postere/P561.png
|
0
|
562
|
Pascu Constantin
|
Aparat si process complex de purificare a aerului
|
Inventia se refera la un dispozitiv utilizat in purificarea complexa a
aerului de disperii mecanice, fizico-chimice si bacteriologice prin
implicarea aerosolilor salini. Obtinerea aerosolilor se face prin trecerea
unui curent de aer prin diafragme poroase de clorura de sodiu
microcristalina, obtinute prin recristalizare si brichetare.
|
1
|
http://www.cttecotech.ro/salon/postere/P562.doc
|
0
|
563
|
Pavunev D., Antohi Constantin Marin
|
Echipament pentru tratarea si pastrarea legumelor si fructelor
|
The exposure of vegetables placed onto a conveyer belt which transit a case
with UV radiations generators which generates ozone; the ozone, being heavier
descends on the lower side, where the vegetables are passing through.
|
7
|
http://www.cttecotech.ro/salon/postere/P563.png
|
0
|
564
|
Pavunev D., Antohi Constantin Marin
|
Aparat pentru uscare aseptica
|
The disinfection of the aspirated and warmed air used for the hands and
medical objects drying. For starting the instalation uses two IR barriers
positioned in the hand’s positioning area.
|
11
|
http://www.cttecotech.ro/salon/postere/P564.png
|
0
|
565
|
Pavunev D., Antohi Constantin Marin
|
Traductor pentru vibratii
|
The transducer commands the methane and electrical energy stoppage using an
electrically specialized scheme. It also commands the lightning of the
nigh-time illumination on the earthquake escape route.
|
20
|
http://www.cttecotech.ro/salon/postere/P565.png
|
0
|
566
|
Pop Ioan I.,
Virgil Ispas, Viorel Ispas
|
Mecanism de rotatie pentru robotii industriali
|
The invention presented above shows a modern and an
economical solution for the hydraulic drives, used to obtain rotational
movements, specifics to industrial robots.
|
3
|
http://www.cttecotech.ro/salon/postere/P566.png
|
0
|
567
|
Pop Ioan I., Ing. Teodor Domide
|
Dispozitiv electrohidraulic de comanda
|
The invention presented above referes to an
electro-hydraulical command device, used to command linear hydraulic motors,
used for building numeric-command machines and in naval and air industry.
|
3
|
http://www.cttecotech.ro/salon/postere/P567.png
|
0
|
568
|
Pop Ioan I., Teodor Domide
|
Mecanism de rotatie pentru robotii industriali
|
The invention presented above shows a modern and an
economical solution for the hydraulic drives, used to obtain rotational
movements, specifics to industrial robots.
|
3
|
http://www.cttecotech.ro/salon/postere/P568.png
|
0
|
569
|
Pop Ioan I., Virgil Ispas, Viorel Ispas
|
Mecanism de translatie pentru robotii industriali
|
The invention above illustrates an translation mechanism
for industrial robots, wich equip translational modules, thus resulting in a
greater speed.
|
3
|
http://www.cttecotech.ro/salon/postere/P569.png
|
0
|
570
|
Pop, I.I. , Albu, A., Deacu, L., Nagy, K., Mandea, G.
|
Distribuitor hidraulic universal cu supape
|
The invention propose a ingenious modular construction of
an universal directional control valve which provide, in a single
construction, all connecting variants between the flow ways for a selected
typo-dimension.
|
3
|
http://www.cttecotech.ro/salon/postere/P570.png
|
0
|
571
|
Pop, I.I., Albu, A., Deacu, L.
|
Bloc logic hidraulic
|
Inventia se refera la descrierea unui bloc logic hidraulic
|
3
|
|
0
|
572
|
Pop, I.I., Baciu, E
|
Mecanism de translatie electrohidraulic pentru roboti industriali
|
Inventia se refera la un mecanism de translatie pt. robotii industriali,
destinate echiparii modulelor ce executa miscari de translatie care asigura o
viteza de deplasare marita
|
3
|
|
0
|
573
|
Pop, I.I., Baciu, E.
|
Dispozitiv electrohidraulic de comanda
|
Inventia se refera la descrierea unui dispozitiv electrohidraulic de comanda
|
2
|
|
0
|
574
|
Pop, I.I., Bob, D., Capusan, L., Somesan, C.
|
Sistem de translatie pentru roboti industriali
|
Inventia se refera la descrierea unui sistem de translatie pentru roboti
industriali
|
3
|
|
0
|
575
|
Pop, I.I., Deacu, L.
|
Drosel hidrologistic bisens
|
Inventia se refera la descrierea unui drosel hidrologistic bisens
|
3
|
|
0
|
576
|
Pop, I.I., Deacu, L.
|
Sistem de comanda si actionare
|
Inventia se refera la descrierea unui sistem de comanda si actionare
|
3
|
|
0
|
577
|
Pop, I.I., Deacu, L.
|
Bloc logic hidraulic
|
Inventia se refera la descrierea unui bloc logic hidraulic
|
3
|
|
0
|
578
|
Pop, I.I., Ispas, Vrg., Ispas, V.
|
Linear proportional displacement mechanism for robots
|
The invention propose a linear proportional displacement mechanism for robots
|
3
|
|
0
|
579
|
Pop, I.I., Ispas, Vrg., Ispas, V.
|
Mecanism de rotatie oscilant pentru roboti industriali
|
Inventia prezinta o solutie moderna si economica de actionare hidraulica,
necesara obtinerii miscarilor rotative specifice robotilor industriali.
|
3
|
|
0
|
580
|
Pop, I.I., Parauan, I., Deacu, L.
|
Drosel hidrologistic proportional
|
Inventia se refera la descrierea unui drosel hidrologistic proportional
|
3
|
|
0
|
581
|
Popa Liviu, Luputiu Mircea, Miloi Alexandru Iosif, Sandu Ion, Calu Nicolae,
Aelenei Nicolae
|
Procedeu pentru obtinerea unui electrolit de imobilizare pentru elemente
galvanice primare
|
Invenţia se referă la un procedeu de obtinere unui electrolit de imobilizare
pentru elemente galvanice primare
|
6
|
|
0
|
582
|
Popescu G. s.a.
|
Modul de micro- sau ultrafiltrare
|
Inventia se referă la un modul de micro sau ultrafiltrare, ce poate fi
folosit la tratarea efluentilor lichizi, cum ar fi prepararea apei potabile,
purificarea apelor industriale, filtrarea berii, vinului, sucurilor naturale,
a laptelui si a altor lichide, în vederea limpezirii sau a separării unor
componente din ele.
|
|
http://www.cttecotech.ro/salon/postere/P582.pps
|
0
|
583
|
Popescu G. s.a.
|
Procedeu de recuperare a titeiului
|
Procedeu de recuperare a titeiului prin injectia unui dop de solutie micelara
urmata de injectia apei cu vascozitate marita prin adaos de polimer.
|
5
|
http://www.cttecotech.ro/salon/postere/P583.png
|
0
|
584
|
Popescu G. s.a.
|
Procedeu de recuperare a titeiului
|
Recuperarea titeiului prin injectia unui dop de solutie micelara cu
viscozitate mare pe baza de compusi tensioactivi anionici si neionici.
|
5
|
http://www.cttecotech.ro/salon/postere/P584.png
|
0
|
585
|
Popescu G. s.a.
|
Solutie micelara pentru extractia miscibila a titeiului
|
Solutie micelara pentru extractia titeiului cu 10-90% substanta
hidrocarbonata
|
6
|
http://www.cttecotech.ro/salon/postere/P585.png
|
0
|
586
|
Popescu G. s.a.
|
Compozitie aditiva pentru paste de ciment si procedeu de obtinere a acesteia
|
Compozitie aditiva pe baza de lignosulfonat de amoniu si hidroximetil
celuloza pentru paste de ciment pentru intarzierea intaririi.
|
6
|
http://www.cttecotech.ro/salon/postere/P586.png
|
0
|
587
|
Popescu G. s.a.
|
Modul de ultrafiltrare
|
Invenţia se referă la un modul de ultrafiltrare, la care colectarea
lichidului filtrat se face prin niste canale speciale, având o
construcţie simplă şi putându-se realiza dintr-un număr foarte mare
de plăci, fără restricţii din punct de vedere hidraulic, oferind prin
concepţia sa posibilitatea de decolmatare a elementelor filtrante.
|
6
|
http://www.cttecotech.ro/salon/postere/P587.png
|
0
|
588
|
Popescu G. s.a.
|
Compozitie bituminoasa cu fibre si procedeu de obtinere a acesteia
|
Compozitie bituminoasa armata cu fibre poliesterice pentru cresterea
rezistentei mixturilor asfaltice.
|
6
|
http://www.cttecotech.ro/salon/postere/P588.png
|
0
|
589
|
Popescu G. s.a.
|
Procedeu pentru obtinerea unui aditiv utilizat la mortare si betoane
|
Inventia rezolva problema modului si raportului de asociere a componentelor
in perspectiva largirii gamei aditivilor superplastifianti si inlatura
dezavantajele aparute la sulfonarea amestecului complex de hidrocarburi
policiclice condensate (rezultate ca subprodus in industria cocso-chimica).
|
4
|
http://www.cttecotech.ro/salon/postere/P589.ppt
|
0
|
590
|
Popescu G. s.a.
|
Procedeu de obtinere a unui aditiv pentru mortare si betoane
|
Procedeul valorifica un produs rezidual la prelucrarea gudroanelor de
cocserie. Aditivul propus confera betonului in care se introduce in proportii
reduse o buna fluidificare si proprietati mecanice imbunatatite. Aditivul
este eficace in special in cazul amestecurilor de beton cu tasare de maxim 12
cm, cu o coeziune corespunzatoare si este indicat in industria
prefabricatelor.
|
4
|
http://www.cttecotech.ro/salon/postere/P590.ppt
|
0
|
591
|
Popescu Miron, Godeanu Marioara, Mateescu Ioan, Godeanu Stoica Preda
|
Procedeu si instalatie pentru epurarea apelor uzate, biodegradabile
|
Se descrie procedeul si instalatia pentru epurarea apelor uzate,
biodegradabile
|
1
|
http://www.cttecotech.ro/salon/postere/P591.png
|
0
|
592
|
Popescu Viorel-Mihai
|
Nou procedeu de producere a energiei electrice din mercur
|
The experiment is based on the vibration of the atomic center in the crystal
metallic lattice of a mercury sample, which is transferring over bonding
electron orbital. If the atom is excited using the resonance phenomenon the
link between the atomic center and electron can be broke and the conduction
electron will make alternating current. Resonance frequency is 233nm. Web
http://www.geocities.com/michaelvio
|
1
|
http://www.cttecotech.ro/salon/postere/P592.png
|
1
|
593
|
Popescu Viorel-Mihai
|
Nou procedeu de producere a energiei electrice din mercur prin rezonanta
magnetron-particula termica
|
The present invention refers to the generation of electric
power using the interaction between the thermal particle and magnetron at a
frequency of 4,1GHz and 179MHz for mercury , when the magnetron is
interacting with Hg atoms, which are in a Brownian movements. Web:
http://www.geocities.com/michaelvio
|
1
|
http://www.cttecotech.ro/salon/postere/P593.png
|
1
|
594
|
Popescu Viorel-Mihai
|
Antigravitatia prin fenomen de rezonanta foton-graviton
|
The present invention refers to the anti-gravity
generation using a ~ 31 Angstrom (30.8 Angstrom) laser-beam in range of: +/-
0.1% of the frequency placed perpendicular to the earth in the direction of a
small object. The phenomenon occurrence is also possible for a ~381 nm
(3804.3 Angstrom) laser-beam in range: 380.43nm +/- 0.1% of the frequency
which is obtain with a UV LASER. Web http://www.geocities.com/michaelvio
|
20
|
http://www.cttecotech.ro/salon/postere/P594.png
|
1
|
595
|
Portos Valentin Alexandru, Ianache Apostol
|
Instalatie hidropneumatica pentru producerea energiei electrice si pentru
irigatii
|
Inventia se refera la o instalatie hidropneumatica pentru producerea energiei
electrice sau pentru irigatii montane in lungul unei ape curgatoare sau la
malul marii sau la cel al oceanului unde exista valuri puternice sau cursuri
normale ale apelor de ses cu viteza de cel putin 4-5 m/s.
|
1
|
http://www.cttecotech.ro/salon/postere/P595.doc
|
0
|
596
|
Predeanu Georgeta, Albastroiu Petre, Ticleanu Nicolae, lambescu Silviu,
Dobrescu Mircea, Slavescu Valerica
|
Procedure for activated carbon manufacturing
|
Xylite activated carbon – new ecoproduct – with high adsorption capacity
comparable with commercial sorbents (wood, coconut) and wide applications in
the purification processes.
|
6
|
http://www.cttecotech.ro/salon/postere/P596.png
|
0
|
597
|
Prepelita Dan
|
Instalatie si metoda de automatizare a irigatiei
|
The patent to refer at the methode and turbine plant, for the gravitational
irrigation systems automation and dispatchering priority, through
micro-hydropower structures connection by computer, transducers, water-meter,
with electrical energy complementary (power autonomy). L'installation type
microcentrale hydro-electrique permet le gerance automatique avec priorite du
proces d'irrigation, le reglage automatique de debits repartises et le
compteurisation du consommation d'eau, maintenirement de flottaison dans le
bief aval, la dispatcherisation de systemes d'irrigation emplacees sur le
versants et secondaire la production d'energie electrique pour l'alimentation
des equipements.
|
1
|
http://www.cttecotech.ro/salon/postere/P597.png
|
0
|
598
|
Prepelita Dan, Chirila Alex.
|
Constructie hidrotehnica de tip sifon coborator si metoda de curatire a
aluviunilor
|
The invention concerns a hydraulic unsilting method for descending siphons,
by means of controlled generated swirls inside the pipes of the hydrotechnic
building. L'invention presente une installation ayant des elements rigides de
construction et une procede hydraulique qui permet le prevent du colmatage
et/ou le nettoyage du schlamm qui produise l'obturation des tubes des siphons
descendants emplaces sur le canaux ouverts, par produire un tourbillonnement
controle du flux d'eau.
|
4
|
http://www.cttecotech.ro/salon/postere/P598.png
|
0
|
599
|
Prepelita Dan, Blidaru Valeriu
|
Structura de baraj subteran cu priza pentru irigatii
|
The invention concerns the creation of an underground water storage by
building an impermeable "V" shaped dam sunken under a river bed,
endowed with a special water plug, allowing the irrigation of agricultural
lands. L'invention presente une construction qui assure la creation d'une
accumulation souterraine, par un barrage nonpermeable en forme de
"V", enterre transversalement, qui englobe des galeries speciales
qui permet le control de fonctionnement pour des niveaux dans la riviere ou
pour le regim de secheresse, les eaux etant dirigees pour l'irrigation des
terrains.
|
4
|
http://www.cttecotech.ro/salon/postere/P599.png
|
0
|
600
|
Prepelita Dan, Cojocaru Ioan
|
Metoda si instalatie pentru determinarea pierderilor de apa prin materiale de
impermeabilizare
|
The invention presents an effective and convenient method and a mobile
totting appliance for directly and accurately measuring (in field "in
situ" or laboratory) of water losses through impervious hydrotechnic
materials. L'invention presente une methode commode et efficace et une
installation mobile et reutilisable, pour le mesurage directement et de
precision des pertes d'eau par materiaux d'impermeabilisation (d'etancheite)
utilises dans le domaine hydrotechnique (constructions), en conditions
d'exploitation ("in situ") et en laboratoire.
|
4
|
http://www.cttecotech.ro/salon/postere/P600.png
|
0
|
601
|
Pricop Miron
|
Element elastic armat si cuplaj pentru arbori
|
Inventia isi propune sa se realizeze un element elastic armat si un cuplaj pentru
arbori capabil sa functioneze in condiutii grele, sa aiba un service rapid si
usor si sa conserve coaxialitatea arborilor
|
3
|
http://www.cttecotech.ro/salon/postere/P601.ppt
|
0
|
602
|
Pricop Miron
|
Procedeu si dispozitiv pentru centrare si aliniere
|
Inventia isi propune sa se realizeze un dispoziti pentru centrarea a doua
cuplaje si a oricaror elemente care trebuie centrate sau aliniate
|
3
|
http://www.cttecotech.ro/salon/postere/P602.ppt
|
0
|
603
|
Prisacari V., Tapcov V., Buraciov S., Barci M., Gulea A., Samusi N.
|
Les complexes du cuivre a proprietes antimicrobienne
|
L’invention decrit les complexes du cuivre a proprietes antimicrobienne
|
11
|
http://www.cttecotech.ro/salon/postere/P603.doc
|
0
|
604
|
Pryazovskyi State Technical
University
|
Bell-less type
blast furnace charging device
|
Bell-less type blast furnace charging device ensures efficient control of
radial blend distribution and gas flow by decreasing the iron ore load in the
zone of maximum concentration of sinter and pellets. It results in
predominant development of iron recovery reactions by gases and decreasing of
endothermic reactions of iron recovery by solid carbon and hence decreasing
of the specific coke consumption by 5 – 8 kg/t hot metal. In testing of this
method at BFs 3 and 4 of Azovstal Iron & Steel Works, Mariupol, the specific
coke consumption reduced by 10 kg/t hm, the monthly profit amounted to UAH
320 thousand. The estimated annual profit for the average size blast furnace
is at least UAH1.5 million. Implementation of this method does not involve
any capital investment or adaptation in production. All the units in this
method are protected by patents.
|
3
|
|
0
|
605
|
Pusneac A., E. Bodorina, E. Tutovan
|
Procedeu de îmbogatire a bentonitei
|
The invention relates to a process for bentonite acid
activation and may be used in the wine industry and for juice production. The
process for bentonite acidic activation includes comminution of natural
bentonite.
|
5
|
http://www.cttecotech.ro/salon/postere/P605+606.png
|
0
|
606
|
Pusneac A., Bodorina E., Tutovan E.
|
Procedeu de activare acida a bentonitei
|
Inventia se refera la un procedeu utilizabil in industria vinicola si la
fabricarea sucurilor. Procedeul include faramitarea bentonitei naturale,
inmuierea ei in apa, tratarea acida a bentonitei, separarea suspensiei de
bentonita, uscarea si faramitarea bentonitei activate.
|
5
|
http://www.cttecotech.ro/salon/postere/P605+606.png
|
0
|
607
|
Radu Daniela
|
Sistem de determinare a glicemiei si indicarea prescriptiilor medicale
|
The invention is a system that detects the level of
glycaemia and indicates medical prescriptions, for curing the patients using
a computer with an internet connection and it can be used at home.
|
11
|
http://www.cttecotech.ro/salon/postere/P607.png
|
0
|
608
|
Marin Radu, Constantin Cristoi, Radu Iordăchel, Mircea Dinescu, Liliana
Pasăre, Florica Radu
|
Monitorizarea globala a proceselor biologice ce au loc in cursul dializei
renale cu sisteme informatice de inteligenta artificiala si interfete
specializate de achizitie a datelor semnificative in timp real
|
Invenţia se referă la un sistem de observare continuă a pacienţilor
în procesele de dializă pentru monitorizarea globală a proceselor biologice
utilizând sisteme informatice de inteligenţă artificială.
|
11
|
http://www.cttecotech.ro/salon/postere/P608.ppt
|
1001
|
609
|
Marin Radu, Constantin Cristoi, Radu Iordăchel, Mihai Fluieraş,
Constantin Antohi, Mircea Leonte, Bujor Albu
|
Metoda si sistem de monitorizare a proceselor biologice in cazul maladiilor
de natura oncogena
|
Invenţia se referă la o metodă şi un sistem pentru monitorizarea
“în timp real” a proceselor biologice implicate în maladiile oncogene, pentru
diagnoză, tratament şi prevenirea evoluţiilor acestor boli.
|
11
|
http://www.cttecotech.ro/salon/postere/P609.ppt
|
0
|
610
|
Marin Radu, Liliana Pasăre, Florica Radu, Ioana Viezure, Daniela Raţă
|
Procedeu de obtinere a membranelor si membrana din polimeri acrilici
|
Invenţia de faţă se referă la un procedeu de obţinere a membranelor
polimerice din poliacrilonitril în vederea utilizării lor în două procese
membranare de separare, şi anume: microfiltrarea şi ultrafiltrarea.
Principalul avantaj al proceselor în care se utilizează membranele de
microfiltrare şi ultrafiltrare constă în capacitatea de a separa
compuşi termolabili, ceea ce rezolvă problemele de separare şi
concentrare a compuşilor utilizaţi în farmacie, industria
alimentară, medicină, biotehnologii, chimie, petrochimie, protecţia
mediului.
|
6
|
http://www.cttecotech.ro/salon/postere/P610.png
|
0
|
611
|
Marin Radu, Gheorghe Bătînescu, Arghirescu Marius, Mircea Dinescu, Florin
Cioroianu
|
Baterie de filtrare a apei cu functie multipla, filtru de impuritati si
filtru producator de apa activata continut de aceasta
|
Invenţia se referă la o instalaţie de purificare a apei folosită
pentru obţinerea apei potabile provenind din surse de suprafaţă sau
de adâncime în locuri izolate, prin filtrarea acesteia în trei trepte
distincte, urmată de purificarea microbiologică prin tratarea cu un agent de
dezinfecţie.
|
1
|
http://www.cttecotech.ro/salon/postere/P611.png
|
0
|
612
|
Marin Radu, Constantin Cristoi, Mariana Georgescu, Georgeta Grîsîc, Mircea
Dinescu, Florica Radu
|
Zguri siderurgice reciclate. Procedeu si instalatie de preparare si
utilizarea acestora in infrastructura terestra
|
Invenţia se referă la un procedeu de reciclare a zgurilor siderurgice în
scopul utilizării acestora în infrastructura de drumuri şi cale ferată.
|
1
|
http://www.cttecotech.ro/salon/postere/P612.png
|
0
|
613
|
Marin Radu, Viorica Trandafir, Florica Radu, Ion Brad, Demetra Nuţă
|
Complecsi bioactivi din colagen si extract de Citrullus vulgaris, pentru uz
cosmetic
|
Invenţia de faţă se referă la complecşi bioactivi din colagen
şi extract de Citrullus vulgaris, pentru uz cosmetic şi la
procedeul de preparare al acestora sub formă de mască liofilizată.
|
12
|
http://www.cttecotech.ro/salon/postere/P613.pps
|
0
|
614
|
Marin Radu, Ion Brad, Mircea Dinescu, Simion Popescu, Florica Radu
|
Procedeu şi instalaţie de producere a berii, bere produsă şi
amestec cu hamei pentru producerea acesteia
|
Invenţia se referă la folosirea tehnologiilor neconvenţionale
pentru obţinerea unor noi sortimente de bere vitaminizante, energizante,
antistres, cu un conţinut relativ scăzut de α -acizi şi un conţinut
crescut de serotonină, utilizând amestec de extract de hamei şi cătina.
|
7
|
http://www.cttecotech.ro/salon/postere/P614.pps
|
0
|
615
|
Marin Radu, Gheorghe Mocuţa, Madalina Antonescu, Constantin Cristoi, Mircea
Dinescu, Florica Radu
|
Comjust-sistem juridic organizat prin programe inferentiale pe baza de
limbaje de inteligenta artificiala, cu aplicatii in dreptul comercial
|
COMJUST is a juridical system based on inferential
programs, structured on languages of artificial intelligence, capable to
organize its functions based on inferential algorithms in a similar manner
with a court of justice. It is capable to analyze the legal data and to offer
an objective, just, and motivated solution at the end of on “electronic
trial” that can be entirely simulated or with real participants or even in
course to be solved by a real court of justice. It can conciliate the judge
or the prosecutor, as well as any interested person by offering an objective
view of the case, based on its information and analyses. It is designed to be
applied in the field of commercial contracts; the commercial titles of value;
the fusion or the dissolution of commercial societies; establishment of
non-fulfillment of professional obligations that merchants have etc.). It is
composed of two distinct sub-systems linked together by specific inferential
algorithms: the sub-system 1, designed to function as a base of legal data;
the sub-system 2, projected to operate as an expert type of inferential system,
capable to use the function of analyze in order to offer the solution based
on Romanian laws in force, and generally, to combat the criminality in the
commercial sector.
|
2
|
http://www.cttecotech.ro/salon/postere/P615.png
|
0
|
616
|
Marin Radu, Madalina Antonescu, Constantin Cristoi, Mircea Dinescu, Florica
Radu
|
Family just - sistem juridic organizat prin programe inferentiale pe baza de
limbaje de inteligenta artificiala, cu aplicatii in dreptul familiei
|
FAMILY JUST is a juridical system based on inferential programs, structured
on languages of artificial intelligence, capable to offer juridical solutions
in the field of family law (divorce; partition of common goods; establishing
guardianship for a minor; adoption; establishing the consanguinity in lineal
descent; establishing the obligation of maintenance of a family; establishing
the nullity of a marriage etc.). It is structured on two distinct
sub-informatic systems linked by a package of algorithms of inference
specific to the FAMILY JUST system: the informatic sub-system 1, structured
as a base of juridical data and composed of specific functions (input/output;
links; analyses; simulations); the informatic sub-system 2, structured as an
expert system based on artificial intelligence languages, capable to operate
on a real or virtual case in the family law, as a real court justice and
capable to provide an objective, legal and motivated solution to that case.
|
2
|
http://www.cttecotech.ro/salon/postere/P616.png
|
0
|
617
|
Marin Radu, Gheorghe Mocuţa, Madalina Antonescu, Constantin Cristoi, Mircea
Dinescu, Florica Radu
|
Crimestat - sistem juridic inferential de management, monitorizare si analiza
juridic-criminogena a datelor si fenomenelor infractionale din societatile
aflate in tranzitie la economia de piata
|
CRIMESTAT is a juridical system based on inferential
programs, structured on languages of artificial intelligence, capable to
operate in a similar manner as a real court of justice, to analyse the case
and to offer an objective, just and motivated solution at the end of an
„electronic trial”. It is designed to be applied to the field of busines law,
in order to combate financial criminality and all types of crimes associated
with this phenomenon. It is composed of two distinct sub-systems linked
together by specific inferential algorithms: the sub-system 1, designed to
function as a base of legal data; the sub-system 2, projected to work as
inferential program, capable to use the function of analysing the given data
and to offer the solution based on the Romanian laws in force.
|
2
|
http://www.cttecotech.ro/salon/postere/P617.png
|
0
|
618
|
Marin Radu, Madalina Antonescu, Constantin Cristoi, Mircea Dinescu, Florica
Radu
|
Sijinfer - sistem juridic organizat prin programe inferentiale pe baza de
limbaje de inteligenta artificiala
|
SIJINFER is a juridical system based on inferential
programs, structured on artificial inteligence types of languages, capable to
judge an „electronic trial”, in a similar manner with a court of justice. It
is capable, due to the inferential algorithms, to analyse legal data of the
case and to offer an objective, just, and legally motivated solution, that
can be optionally taken into consideration by a real instance. It is designed
to be applied in all fields of law, having as possible secondary applications
another inferential programs operating in various legal fields: commercial
law, business law, criminal law, family law, and organising its inferential
programs in order to reconcile a quarrel in these fields. It is composed of
two distinct, sub-systems, linked by specific inferential algorithms: the
sub-system 1, designed to function as a base of legal data; the sub-system 2,
projected to operate as an expert type of inferential system, capable to use
the function of analysing data, in order to offer the solution based on
Romanian laws in force, optionally folowed by real judicial instance.
|
2
|
http://www.cttecotech.ro/salon/postere/P618.png
|
0
|
619
|
Radu Stefan
|
Dispozitiv pentru realizarea ramificatiilor la tevi
|
Inventia se refera la un dispozitiv pentru realizarea ramificatiilor la tevi
ce se monteaza pe o presa axiala si este format dintr-un dorn-pana, care
patrunde si transmite forta de impingere intr-o matrita in care, teava asupra
careia se lucreaza este ghidata in sens radial, un poanson asupra caruia
dornul pana actioneaza, cu planul sau inclinat, fortandu-l sa strapunga teava
a carei zona este incalzita anterior, cu poansonul de atac, cu care este
prevazut si sa rasfranga marginile gaurii astfel formate, realizand
ramificatia.
|
3
|
http://www.cttecotech.ro/salon/postere/P619+P620.ppt
|
0
|
620
|
Radu Stefan s.a.
|
Cilindru hidraulic compus
|
Inventia se refera la un ansamblu format dintr-un cilindru de diametru mai
mare, fixat la un capat si un piston fixat la celalalt capat, intre ele
glisand etans si purtand sarcina un cilindru piston tip oala care intr-un
sens intra in cilindru mare si in celalalt sens acopera cilindr fix mic.
|
3
|
http://www.cttecotech.ro/salon/postere/P619+P620.ppt
|
0
|
621
|
Radu Stefan
|
Dispozitiv pentru fabricarea chesoanelor sectiilor de corp de nava
|
Inventia se refera la un dispozitiv pentru fabricarea chesoanelor sectiilor
navale si asamblarea mai multor sectii intre ele, folosind poduri rulante
pentru manevrarea lor.
|
3
|
http://www.cttecotech.ro/salon/postere/P621+P622.ppt
|
0
|
622
|
Radu Stefan
|
Dispozitiv pentru cuplarea chesoanelor de bordaj
|
Inventia se refera la cuplarea chesoanelor intre ele prin suduri de calitate,
orizontalizate in toate pozitiile necesare.
|
3
|
http://www.cttecotech.ro/salon/postere/P621+P622.ppt
|
0
|
623
|
Radu Stefan
|
Osie pentru vagoane de cale ferata
|
Inventia se refera la o osie pentru vagoane de cale ferata, pe care
asambleaza rotile de cale ferata folosindu-se la toate vehiculele de cale
ferata, in special, la vagoanele de calatori si marfa.
|
3
|
http://www.cttecotech.ro/salon/postere/P623+P624.ppt
|
0
|
624
|
Radu Stefan
|
Ansamblu de rulare pentru vehicule de cale ferata
|
Inventia se refera la o osie cu roti libere, autoorientabile, montata pe
vagoane de cale ferata, utilizate in transporturile feroviare, in conditiile
de viteza mare si siguranta crescuta.
|
15
|
http://www.cttecotech.ro/salon/postere/P623+P624.ppt
|
0
|
625
|
Radu Stefan, Delca Ion
|
Incarcator colector trirotativ
|
Se prezinta un ridicator-incarcator hidraulic montabil pe orice autovehicol
sau atasabil acestuia, cu tren propriu de rulare, folosibil la mecanizarea
maximala a incarcarilor si descarcarilor agricole si industriale, benelor
schimbabile, paletilor si coteinerelor tipizate, ca si pentru stivuirea
inalta a acestora.
|
3
|
http://www.cttecotech.ro/salon/postere/P625.png
|
2
|
626
|
Radu Stefan
|
Instalatie de ambalare a paletilor tipizati cu folie contractibila
|
Inventia se refera la o instalatie de ambalare care permite aplicarea metodei
de ambalare cu folie contractibila de o gama mai larga de clienti indiferent
de volumul de ambalat.
|
3
|
http://www.cttecotech.ro/salon/postere/P626.gif
|
6
|
627
|
Radu Stefan
|
Cadru rulant port bene
|
Inventia se refera la un cadru rulant-port bene folosit pentru preluarea
incarcaturilor de la combinele pentru recoltat cereale.
|
3
|
http://www.cttecotech.ro/salon/postere/P627+628.png
|
0
|
628
|
Radu Stefan
|
Metoda si dispozitiv pentru manevrat containere tipizate
|
Inventia se refera la o metoda si un dispozitiv pentru ridicarea
containerelor tipizate la nivelul unui transportor rulant si transferarea lor
pe acesta, in vederea transportului si depunerii lor in vagoane.
|
3
|
http://www.cttecotech.ro/salon/postere/P627+628.png
|
0
|
629
|
Radu Stefan
|
Tehnologie si utilaj pentru reconditionarea rotilor de vagoane
|
Inventia se refera la o tehnologie optimizata pe un utilaj specializat pentru
reconditionarea rotilor de vagon sau locomotiva, prin aplicarea unui cerc
profilact pe periferia rotii prin presare la cald. Cercul ce reface stratul
uzat se poate aplica direct pe bandaj, pe roata monobloc sau pe rotile
presate pe osie.
|
3
|
http://www.cttecotech.ro/salon/postere/P629+630.png
|
0
|
630
|
Radu Stefan
|
Roata cu elemente elastice pentru vagoane CF
|
Inventia se refera la o roata cu elemente elastice pentru vagoanele de calea
ferata, folosibila pentru marirea confortului de calatorie in transportul
feroviar la viteze mari de deplasare.
|
3
|
http://www.cttecotech.ro/salon/postere/P629+630.png
|
0
|
631
|
Radu Stefan
|
Tehnologie si utilaje pentru realizarea pieselor cave mari
|
Inventia prezinta o tehnologie si diferite utilaje pentru realizarea pieselor
cave cu profil complex, conice, toroidale sau profil circular-periferice de
dimensiuni mari (peste F= 500mm), folosibile in domenii in care trebuie
introduse piese noi cu constructie optimizata si este complementara si
divizionara la inventia „roata pentru autovehicule”. Inventia foloseste
semifabricate tubulare turnate, preferabil centrifugal, pentru formarea prin
extrudare in stare semicalda a diferitelor piese cu profile adaptate noilor
functionalitati, cu consum redus de metal si manopera precum si de cauciuc.
|
3
|
http://www.cttecotech.ro/salon/postere/P631+632.png
|
0
|
632
|
Radu Stefan
|
Roata pentru autovehicule
|
Inventia se refera la o roata pentru vehicule rutiere, cum ar fi masinile
agricole, terasiere si de transport greu, precum si in alte cazuri unde
elasticitatea cu lansaj mai redus, compensata de o siguranta crescuta, o fac
preferabila.
|
3
|
http://www.cttecotech.ro/salon/postere/P631+632.png
|
0
|
633
|
Radu Stefan
|
Cutie de osie pentru boghiuri
|
Inventia se refera la o cutie de osie pentru boghiurile vagoanelor de C.F.
care este compusa din cutia propriu-zisa in care se afla pozitionata o caseta
pentru rulmenti ce poate culisa in plan orizontal fata de axa neutra cu o
anumita cursa ghidata pe cuzineti cu umar curb, fiind echilibrata de segmenti
de cauciuc amplasati in golurile dintre peretii cutiei si caseta rulmentilor.
Totodata, osia este tinuta in pozitia de echilibru pe axa longitudinala de
alti segmenti de cauciuc plasati in capacul cutiei. Astfel, osia devine
autoorientabila la mersul in curba si echilibrata la mersul drept.
|
3
|
http://www.cttecotech.ro/salon/postere/P633+634.png
|
0
|
634
|
Radu Stefan
|
Ansamblu de rulare pentru boghiurile cu ecartament fix
|
Inventia prezinta un ansamblu de rulare cu doua grade de functionalitate,
gradul I permitand autoorientarea osiei si gradul II de functionalitate in
care rotile se rotesc pe osie cu lagaruiri corespunzatoare. Totodata permite
folosirea osiilor tubulare mai usoare si mai rezistente ca cea masiva. Se
reduce greutatea boghiurilor, creste rezistenta si fiabilitatea osiei, se
reduce zgomotul si uzura rotilor si sinelor.
|
3
|
http://www.cttecotech.ro/salon/postere/P633+634.png
|
0
|
635
|
Radu Stefan
|
Tronson intermediar pentru schimbarea ecartamentului
|
Inventia se refera la un tronson intermediar pt. schimbarea ecartamentului
rotilor de vagoane folosite la transporturile feroviare pe trasee cu
ecartamente diferite.
|
3
|
http://www.cttecotech.ro/salon/postere/P635+636.png
|
0
|
636
|
Radu Stefan
|
Ansamblu de rulare pentru boghiurile cu ecartament schimbabil
|
Inventia se refera la un ansamblu de rulare pt. boghiurile vagoanelor cu
ecartament schimbabil, destinat transportului feroviar, in special pt.
trenurile internationale care circula pe trasee cu sine cu ecartament
diferit.
|
3
|
http://www.cttecotech.ro/salon/postere/P635+636.png
|
0
|
637
|
Radu Stefan
|
Punte arcada pentru trecerea peste ape si vai
|
Se descrie puntea arcada pentru trecerea peste ape si vai
|
4
|
http://www.cttecotech.ro/salon/postere/P637.ppt
|
0
|
638
|
Radu Stefan
|
Procedee, componente si mijloace pentru edificarea locuintelor
|
Se descriu procedee, componente si mijloace pentru edificarea locuintelor
|
4
|
http://www.cttecotech.ro/salon/postere/P638.ppt
|
0
|
639
|
Radu Stefan, Danila Constantin, Delca Vasilache, Delca Ion
|
Method and Buckets for the taking of the agricultural and in dustrial
products
|
The using of the box-pallets for the covey of the goods with all their
utilities don’t apply in agriculture, yet. To increase the moderization in
his branch, we prezent for the application this solution.
|
9
|
http://www.cttecotech.ro/salon/postere/P639.ppt
|
2
|
640
|
Radu Valentin
|
Dispozitiv si accesorii actionate de presiunea apei de la reteaua de
alimentare cu destinatia: uz casnic si gospodaresc
|
Inventia se refera la dispozitivul si accesoriile destinate curatirii si/sau
limpezirii suprafeţelor (faianta, gresie), obiectelor sanitare (cada, chiuveta,
vas WC), spalarii autoturismelor precum si igienei corporale.
|
10
|
http://www.cttecotech.ro/salon/postere/P640.png
|
0
|
641
|
Radulescu Gheorghe, Brad Ion, Moise Maria Ioana, Bitea Claudia,
|
Compozitie naturala stimulatoare a activitatii vitale a organismului uman
|
Compozitia conform inventiei este constituita din 50-60 parti germeni de
grau, 20-25 parti tarate de grau si 10-15 parti pulbere Hippophse
delipidizata partile fiind exprimate in greutate.
|
7
|
http://www.cttecotech.ro/salon/postere/P641.doc
|
0
|
642
|
Radulescu R., Georgescu D.P, Filip Gh., Tomus N., Benoniu I.C. Muntean
|
Procedeu de recuperare a aurului, argintului si cuprului din zguri
|
The invention present a recovery procedure of gold, silver
and copper contained by slag resulted from doré alloy melting, obtained at
the gold-silver –bearing elutes electrolysis. Silver and gold is lixiviated
in nitric acid. Then silver is selectively precipitated as silver chloride
and then reduced to metallic silver with sugar in alkaline medium. Copper
from nitric solution is recovered by cementation on iron facings. Gold is
leached from the dwelled residuum using wet chlorination, then it is purified
through ion exchanging and reduced to metallic gold with hydroquinone
|
5
|
http://www.cttecotech.ro/salon/postere/P642.png
|
0
|
643
|
Robu St., V.Bivol, N.Barba, G.Dragalina, L.Vlad, A.Prisacari, S.Sergheev
|
Purtatori de informatie fotostructurabili si electronostructurabili
|
The invention refers to the photo- and electron
structure-forming media for data recording, in particular for holographic
images, which may be used in opto- and microelectronics in the capacity of
photoresistors.
|
2
|
http://www.cttecotech.ro/salon/postere/P643.png
|
0
|
644
|
Roman Ghiorghe, Sandu Ioan-Gabriel, Sandu Irina Crina Anca
|
Procedeu de epurare a apelor industriale si menajere uzate
|
Inventia se refera la un procedeu de epurare a apelor industriale si menajere
uzate, cu incarcare chimica solubila, anorganica (cationi metalici
tranzitionali, amoniu, anioni nitrat, nitrit, fosfat, sulfat etc.) si
organica (uree, fenol, detergenti, coloranti etc.) si cu incarcare insolubila
sau fizica (suspensii minerale si organice).
|
1
|
http://www.cttecotech.ro/salon/postere/P644.pdf
|
0
|
645
|
Rosca Vasile
|
Storied parking lot for crowded areas
|
The storied parking lot for crowded areas is a cylindrical building with
several floors, with a resistance structure formed by glass-type prefab
foundations, prefab poles, prefab beams and prefab trapezoidal tiles. Each
level consists of 8 compartments disposed around the central shaft. The
optimal height is G + 4F (5 floors), but the number of floors may be
increased as function of the area’s seismic potential. The access on the
upper floors is made by means of a telescopic hydraulic jib that sustains a
circular turning platform on its top. The lateral enclosing is made with
aluminum profiles and reflective or thermopane windows. The top level is
covered with a soft structure of polycarbonate tiles that includes a vent.
The telescopic jib plies itself under the ground floor’s pavement. The
platform and jib’s movements are automated and controlled by a computer that
also keeps records of the structure’s occupying degree. A single person is
required to maneuver the whole lot. There’s also a version with a foot-base,
designed for extremely narrow areas at the ground level. The difference from
the standard version is that the ground floor and the 1st floor (if need be)
will only contain the central shaft and will be designed to support the whole
building. As well, the resistance structure can be accomplished as a version
with metallic profiles instead of armoured-concrete prefabs.
|
4
|
http://www.cttecotech.ro/salon/postere/P645.png
|
0
|
646
|
Rudic V., prof. Gulea A., prof. Dumrava V. prof. Gudumac V., Bulimaga V.,
Chiriac T., Cepoi L., Crudu, dr. Bogdan V., Melnic, S., Diug E, Nicolau Gh,
Godorogea P., Muset Gh., Ghinda S., Parii A., Turcan A., Cojocaru A., Rudi L,
Zosim L.
|
Bioaditive alimentare si preparate medicamentoase noi de origine algala
|
The new technologies for obtaining of food bioaditives
(comprimats) on the basis of spirulina biomass, as well as of polyfunctional
remedies “BioR - injectable solutions, suppositories, gels, unguents” through
directed synthesis, extraction, fraction of bioactives substances from
cyanophite algae Spirulina platensis and experimental and clinic researches
of its action cytoprotective and regerenative (BioR), immnomodulative
(BioRZn), osteoregerenative (BioRCr), hepatoprotective(BioRSe, BioRZn) and
antifungic (BioR - gel) have been carried out and the results have been
implemented.
|
7
|
http://www.cttecotech.ro/salon/postere/P646.png
|
0
|
647
|
Rudic Valeriu, Gulea Aurelian, Gudumac Valentin, Sandu Ion
|
Metoda pentru determinarea biomasei uscate de spirulina
|
Inventia se refera la o metoda precisa si reproductibila, folosita pentru
determinarea continutului in biomasa uscata de spirulina din mediul de
cultura care utilizeaza in procesul de spalare, dupa o prealabila filtrare, o
solutie apoasa izotonica.
|
6
|
http://www.cttecotech.ro/salon/postere/P647.png
|
0
|
648
|
Rusetel Mihai
|
Motor cu apa
|
Inventia se refera la un motor cu explozie interna, in doi timpi, care
utilizeaza drept combustibil apa. Pe un sasiu sunt fixate pistoanele incorporate
in cilindri, care contin in centrul lor o piesa incandescenta, cu rolul de
descompunere a apei de compresiune.
|
3
|
http://www.cttecotech.ro/salon/postere/P648.png
|
0
|
649
|
Sahleanu Vasile, Sandu Ion, Bejan Dorin, Mangalagiu Ionel, Leniuc Vasile
|
Procedeu pentru obtinerea cristalelor sau a solutiilor apoase, concentrate de
azotat de mangan
|
Inventia se refera la un procedeu pentru obtinerea cristalelor sau a
solutiilor de azotat de mangan, cuprins in ciclul Biterfeldt, de fabricare a
bioxidului de mangan activ, prin descompunerea termica a azotatului de
mangan, in care se realizeaza procesul complex de dizolvare chimica, a
pirolizitei in amestec cu rodocrozita, sub actiunea dioxidului de azot in
sistem apos, la temeperatura de 40-50°C. In acest sens, se folosesc doua
scrubere fara umplutura in care se realizeaza un contact intim intre fazele
in reactie, aduse sub forma de particule-picaturi dispersate in faza gazoasa
in echicurent, in primul scruber si in contracurent in cel de-al doilea, de
unde gazele nitroase, epuizate, sunt evacuate printr-un separator de
picaturi, iar solutia de azotat de mangan este trimisa la filtrare si apoi la
concentrare. Inventia prezinta avantajul unui randament marit de reactie, a
unui coeficient ridicat de extractie a manganului, din minereu, precum si a
unui consum minim de reactivi si energie prin asigurarea unui contact intim,
intre fazele ce intra in reactie.
|
6
|
http://www.cttecotech.ro/salon/postere/P649.png
|
0
|
650
|
Sahleanu Vasile, SAndu Ion, Ciurescu Toma, Scanteianu Nicolae
|
Instalatie eoliana
|
Inventia se refera la o instalatie eoliana, destinata obtinerii de energie
electrica sau pentru alte actionari mecanice.
|
1
|
http://www.cttecotech.ro/salon/postere/P650.pdf
|
0
|
651
|
Sahleanu Vasile, Sandu Ion, Petrascu Stelian
|
Instalatie pentru calcinarea anaeroba in flux continuu
|
Instalatia se foloseste la calcinarea unor operatii de calcinare anaeroba a
diverselor substante, cum sunt mineralele, ca de exemplu la reducerea termica
a piroluzitei cu carbune, in vederea obtinerii oxidului manganos sau a
amestecului de piroluzita si pirita pentru obtinerea sulfatului de mangan
(II).
|
5
|
http://www.cttecotech.ro/salon/postere/P651.png
|
0
|
652
|
Sahleanu Vasile, Sandu Ion,Ciurescu Toma
|
Centrala termica solara
|
Inventia se refera la o centrala termica solara, constand dintr-o serie de
cuptoare cu focalizare si orientare dupa soare, amplasate pe un nivel, sau pe
mai multe curbe de nivel. Instalatia poate fi utilizata atat in perioadele cu
insolatie mxima, cat si in perioadele cu lumina difuza.
|
1
|
http://www.cttecotech.ro/salon/postere/P652.png
|
0
|
653
|
Salaru Victor , Salaru Vasile
|
Stimularea imunitatii purceilor
|
The process for sucking-pigs immunity stimulation includes treatment thereof
with biologically active material in quality of which it is used the
nutrient medium which is precultivated with Spirulina platensis alga diluted
in two with water at 26... 30°C, the sucking-pigs being bathed beginning
from the first week, 1,5 min and in the third one - up to 5 min.
|
9
|
http://www.cttecotech.ro/salon/postere/P653.png
|
0
|
654
|
Sandu I. s.a.
|
Procedeu de denocivizare a ferocianurilor din slamurile albastre provenite de
la deferizarea vinurilor
|
Procedeu de denocivizare a ferocianurilor din slamurile albastre provenite de
la deferizarea vinurilor pentru recuperarea hexacianoferatului de potasiu.
|
1
|
http://www.cttecotech.ro/salon/postere/P654.pdf
|
0
|
655
|
Sandu Ioan, Arhire Petre, Ticu Cristian, Mangalagiu Ionel, Bejan Dorin,
Munteanu Corneliu, Samoil Gabril, Ciocarlie Ileana, Pintea Anton
|
Chit pentru mobila
|
Inventia se refera la un chit pentru mobila semifluid, utilizat la corectarea
diferitelor defecte (pori, fisuri, gauri) ale pieselor de mobilier obtinute
din lemn masiv sau inlocuitori, inainte sau dupa depunerea straturilor de
protectie sau decorative, care se poate aplica cu ajutorul unui spaclu cu
lama elastica. Chitul este format din celuloza micronizata, colorata sau cu
bait sau cu pigmenti pentru fibre celulozice, in amestec cu pulberi
semicoloidale de CaCO3 pur si SiO2 dispersate intr-un
mediu omogen, obtinut din ceara de albine (si/sau parafina), seu de oaie si
colofoniu, incalzit la 120…125°C pe o baie de ulei, la care se adauga ulei de
in fiert stirenizat si tanin care, dupa omogenizare intr-un malaxor, se
toarna in lingouri.
|
6
|
http://www.cttecotech.ro/salon/postere/P655.png
|
0
|
656
|
Sandu Ioan; Galdau Stan; Marcu Gheorghe; Sandu Irina Crina Anca; Moldovan
Eugenia; Sandu Ioan Gabriel
|
Procedeu de preparare a unui aditiv plastifiant pentru betoane sau mortare
|
Inventia se refera la un procedeu de preparare a unui superplastifiant pentru
betoane si mortare pe baza de saruri de calciu si amoniu al acidului
dinaftilmetandisulfonic coasistat de sarurile de amoniu, calciu si sodiu a
acidului tripolifosforic si silicic
|
4
|
http://www.cttecotech.ro/salon/postere/P656.png
|
0
|
657
|
Sandu Ioan-Gabriel, Ciobanu Liviu, Sandu Irina Crina Anca
|
Procedeu de obtinere a unui catod pentru baterii activabile cu apa
|
Inventia se refera la un procedeu pentru obtinerea unui electrod lamelar,
polifazic, de tip dublu strat pentru sisteme saline apoase.
|
6
|
http://www.cttecotech.ro/salon/postere/P657.png
|
0
|
658
|
Sandu Ioan-Gabriel, Ciobanu Liviu, Sandu Irina Crina Anca
|
Procedeu de obtinere a unui catod pentru baterii activabile cu apa
|
Procedeu pentru obtinerea unui catod pentru baterii activabile cu apa de mare
sau alte solutii apoase saline, care in raport cu un set de 2 anozi lamelari
cu suprafata egala, din tabla de Mg, Al, Zn sau Fe, permite realizarea unei
surse electrochimice de curent, utlizate la alimentarea geamandurilor,
balizelor si a statiilor autonome de semnalizare maritima sau fluviala,
precum si la alimentarea baloanelor meteorologice.
|
6
|
http://www.cttecotech.ro/salon/postere/P658.png
|
0
|
659
|
Sandu Ion
|
Procedeu de obtinere a dioxidului de mangan activ, de mare densitate si
puritate
|
Inventia se refera la un procedeu de obtinere a dioxidului de mangan activ,
de mare densitate si puritate chimica, utilizat ca masa electrochimic activa,
in sursele de curent chimice primare, cu electroliti salini sau alcalini si
ca electrolit solid in structura condensatoarelor cu anoda sinterizata.
|
6
|
http://www.cttecotech.ro/salon/postere/P659.png
|
0
|
660
|
Sandu Ion
|
Amestec catodic organic, pentru baterii activabile, in sisteme saline apoase
|
Inventia se refera la un amestec catodic organic, pentru baterii activabile,
in sisteme saline apoase, pastat, de tip sumativ.
|
6
|
http://www.cttecotech.ro/salon/postere/P660.png
|
0
|
661
|
Sandu Ion, Anghel Ion, Calu Nicolae, Artin Mihaela, Berdan Ioan, Sandu Miluta
|
Procedeu de obtinere a electrolitului solid din structura condensatoarelor cu
anoda de tantal
|
Inventia se refera la un procedeu de obtinere a electrolitilui solid din
structura condensatoarelor cu anoda de tantal prin impregnari succesive a
dielectricului din Ta2O5
al anodei cu solutie de azotat de mangan.
|
3
|
http://www.cttecotech.ro/salon/postere/P661.png
|
0
|
662
|
Sandu Ion, Anghel Ion, Hincu Iancu, Sandu Emilia, Iordache Mirela, Strungariu
Constantin
|
Procedeu de grafitizare a negrului de fum
|
Inventia se refera la un procedeu de grafitizare adiverselor sorturi de negru
de fum, acetilenic, de canal sau de furnal, printr-un procedeu chimic in
sistem apos
|
6
|
http://www.cttecotech.ro/salon/postere/P662.png
|
0
|
663
|
Sandu Ion, Berdan Ioan, Luca Constantin, Macoveanu Matei, Tanase Florica,
Sandu Anca
|
Procedeu de obtinere a argintului coloidal de inalta dispersie in sisteme
organice, sub forma de pelicule sau straturi ultrasubtiri
|
Procedeul consta in tratarea unei solutii apoase de AgNO3 cu acid ascorbic in
prezenta unui protector de coloizi.
|
6
|
http://www.cttecotech.ro/salon/postere/P663.png
|
0
|
664
|
Sandu Ion, Bold Anisoara, Veliscu Corneliu, Muler Karl-Heinz-Ernest, Luca
Constantin, Ungureanu Cornel, Andriescu Ioan
|
Procedeu pentru aliere superficiala a pieselor turnate
|
Inventia se refera la un procedeu de aliniere a pieselor turnate din fonte
cenusii, pestrite, albe sau inalt aliate, cat si din otel.
|
3
|
http://www.cttecotech.ro/salon/postere/P664.png
|
0
|
665
|
Sandu Ion, Calu Nicolae Berdan Ion, Tanase Florica, Sadu Anca Irina
|
Procedeu de obtinere a argintului coloidal de inalta dispersie in sisteme
organice
|
Inventia se refera la un procedeu de obtinere a argintului coloidal de inalta
dispersie in sisteme organice, utilizate la metalizarea diverserlor suporturi
dielectrice sau semiconductoare
|
6
|
http://www.cttecotech.ro/salon/postere/P665.png
|
0
|
666
|
Sandu Ion, Calu Mihai, Petrescu Stelian
|
Procedeu de obtinere a unui tus negru
|
Se descrie procedeul de obtinere a unui tus negru
|
6
|
http://www.cttecotech.ro/salon/postere/P666.gif
|
0
|
667
|
Sandu Ion, Calu Nicolae, Berdan Ioan, Calu Mihai, Barsanescu Adriana
|
Procedeu de obtinere a dioxidului de mangan, activ, de mare puritate
|
Inventia se refera la un procedeu de obtinere a MnO2 activ, de
mare puritate, prin descompunerea termica (piroliza) azotatului de mangan,
tetrahidrat, topit, prin pulverizare intr-un atomizor pravazut de sitem de
vacumare.
|
6
|
http://www.cttecotech.ro/salon/postere/P667.pdf
|
0
|
668
|
Sandu Ion, Calu Nicolae, Berdan Ioan, Luputiu Mircea, Ciurescu Toma, Cojocaru
Ioan, Sandu Teodor
|
Procedeu pentru realizarea electrozilor din clorura de argint pentru baterii
activabile cu apa
|
Se descrie procedeul pentru realizarea electrozilor din clorura de argint
pentru baterii activabile cu apa
|
6
|
http://www.cttecotech.ro/salon/postere/P668.gif
|
0
|
669
|
Sandu Ion, Calu Nicolae, Luputiu Mircea, Anghel Ion, Onofrei Geta, David
Dumitru, Stanila Alexandru
|
Procedeu de obtinere a peliculelor coloidale hidrofobizate, conducatoare
electronic
|
Se descrie procedeul de obtinere a peliculelor coloidale hidrofobizate,
conducatoare electronic
|
6
|
http://www.cttecotech.ro/salon/postere/P669.gif
|
0
|
670
|
Sandu Ion, Calu Nicolae, Pintea Doina, Cecal Alexandru, Bergan Ioan, Ciurescu
Toma, Ciotlaus Pavel
|
Electrolit pentru stanare lucioasa
|
Inventia descrie modul de obtinere a unui electrolit pentru stanare lucioasa
|
6
|
http://www.cttecotech.ro/salon/postere/P670.gif
|
0
|
671
|
Sandu Ion, Calu Nicolae, Sandu Emilia Miluta, Cecal Alexandru, Berdan Ioan,
Calu Mihai
|
Procedeu de grafitizare a negrului de fum
|
Inventia descrie un procedeu de grafitizare a negrului de fum
|
6
|
http://www.cttecotech.ro/salon/postere/P671.gif
|
0
|
672
|
Sandu Ion, Cecal Alexandru, Capra Adrian, Cretu Carmenm Pascu Marius,
Angheluta Carmenm Bultana Ioan, Mangalagiu Ionel
|
Pulbere multicomponenta pentru alierea superficiala a pieselor, in procesul
de turnare
|
Inventia se refera la o pulbere multicomponenta, pentru alierea superficiala
a pieselor in procesul de turnare.
|
6
|
http://www.cttecotech.ro/salon/postere/P672.pdf
|
0
|
673
|
Sandu Ion, Ciurescu Toma, Calu Nicolae, Marza Mitica, Berdan Ioan, Luputiu
Mircea Gheorghe, Popa Liviu Mihai Eugen
|
Metoda si dispozitiv pentru determinarea activitatii electrochimice a
dioxidului de mangan
|
Se descriu metoda si dispozitivul pentru determinarea activitatii
electrochimice a dioxidului de mangan
|
6
|
http://www.cttecotech.ro/salon/postere/P673.gif
|
0
|
674
|
Sandu Ion, Danciu Vitalie Victorian, Tesu Cristinel, Sandu Irina Crina Anca
|
Procedeu de obtinere a unui combustibil solid
|
Inventia se refera la un procedeu de obtinere a unui combustibil solid
utilizand carbune de lemn rezultat din arderea incompleta a vitei de vie
uscata.
|
3
|
http://www.cttecotech.ro/salon/postere/P674.png
|
0
|
675
|
Sandu Ion, Dogaru Vasile, Furnica Emilian, Mangalagiu Ionel, Agop Marilel
Volovat Neculai, Baiceanu Constantin, Mitrea Sorin.
|
Procedeu de obtinere a varistorilor ceramici
|
Inventia se refera la obtinerea varistorilor ceramici pe baza de ZnO prin
coprecipitare secventiala in sistem apos la un pH in jur de 8,5, prin
amestecarea a doua solutii.
|
6
|
http://www.cttecotech.ro/salon/postere/P675.pdf
|
0
|
676
|
Sandu Ion, Feraru Constantin, Sandu Emilia Miluta, Feraru Gheorghe, David
Geta
|
Procedeu de obtinere a sapunului «miez », prin valorificarea superioara a
reziduurilor grase, din apele uzate, rezultate la fabricarea uleiurilor
vegetale
|
Inventia se refera la un procedeu de valorificare superioara, a trei
subproduse rezultate la fabricarea uleiului de floarea soarelui care se
folosesc la obtinerea unui sapun de mare puritate si calitate superioara,
atat ca sapun –clei cat si ca sapun-miez.
|
6
|
http://www.cttecotech.ro/salon/postere/P676.pdf
|
0
|
677
|
Sandu Ion, Galdau Stan, Doncean Gheorghe, Sandu Irina Crina-Anca
|
Compozitie superplastifianta
|
Inventia se refera la o compozitie superplastifianta, pentru aditivare , in
mortare sau betoane constituita din saruri de sodiu ale acizilor
dinaftilmetandisulfonic, silicilic polifosfati.
|
6
|
http://www.cttecotech.ro/salon/postere/P677.pdf
|
0
|
678
|
Sandu Ion, Gheorghiu Dimitrie, Marcuta Mihai, Anghel Ioan, Marcuta Cornelia,
Dumitrescu Lucius, Taraboanta Irina, Furnica Emilian, Balan Traian, Cocuz
Catalin
|
Procedeu de obtinere a varistorilor ceramici
|
Inventia se refera la un procedeu chimic de obtinere a masei active din
compozitia pastilei varistorilor ceramici pe baza de oxid de zinc
|
6
|
http://www.cttecotech.ro/salon/postere/P678.pdf
|
0
|
679
|
Sandu Ion, Gilea Anica, Calu Nicolae, Balta Mihaela, Berdan Ioan, Lupu
Virginel Calu Mihai
|
Lubrifiant apos pentru forjarea la cald in matrite
|
Inventia se refera la compozitia unui lubrifiant apos incompresibil realizat
din doua sisteme disperse apoase pentru forjarea la cald in matrite.
|
3
|
http://www.cttecotech.ro/salon/postere/P679.png
|
0
|
680
|
Sandu Ion, Gulea Aurelian, Ciocarlie Ileana, Panaite Soriu, Sandu Anca
|
Procedeu de obtinere a unui catod pentru baterii, activabile cu apa
|
Inventia se refera la un procedeu pentru obtinerea unui electod lamelar,
polifazic.
|
6
|
http://www.cttecotech.ro/salon/postere/P680.pdf
|
0
|
681
|
Sandu Ion, Gulea Aurelian, Onu Ana, Cozma Danut
|
Procedeu de grafitizare a negrului de fum in sistem apos
|
Inventia se refera la un procedeu de grafitizare a diverselor sorturi de
negru de fum, de canal au de furnal, de diferite grade de puritare, printr-un
procedeu chimic in sistem apos, utilizand procese redoxsi acido-bazice,
combinate cu procedee hidrotermale
|
6
|
http://www.cttecotech.ro/salon/postere/P681.pdf
|
0
|
682
|
Sandu Ion, Ivascan Stefan, Stanila Alexandru, Balasanian Ion
|
Procedeu de obtinere a sarurilor metalelor alcaline si alcalino-pamantoase
industriale neaglomerabile
|
Se descrie procedeul de obtinere a sarurilor metalelor alcaline si
alcalino-pamantoase industriale neaglomerabile
|
6
|
http://www.cttecotech.ro/salon/postere/P682.gif
|
0
|
683
|
Sandu Ion, Luputiu Mircea Gheorghe, Florea Constantin Gheorghe, Palihovici
Velerian, Popa Liviu Eugen, Sandu Ion - Gabriel
|
Procedeu de realizare a catozilor pentru elemente galvanice in sistemul
Mg/AgCl, activabile cu apa
|
Inventia se refera la un procedeu de realizare a catozilor lamelari pentru
elemente galvanice activabile cu apa, din sistemul Mg/AgCl, utilizate ca
surse de rezerva sau de avarie. Procedeul realizeaza catozi lamelari din
clorura de argint dopata, care prezinta rezistenta fotochimica si climatica
ridicata, concomitent cu o rezistenta interna foarte mica si un timp de
activare foarte scurt.
|
6
|
http://www.cttecotech.ro/salon/postere/P683.pdf
|
0
|
684
|
Sandu Ion, Luputiu Mircea, Calu Nicolae, Popa Liviu, Berdan Ioan, Miloi
Alexandru Iosif
|
Procedeu de realizare a electrozilor pentru baterii activabile cu apa
|
Inventia se refera la un procedeu de obtinere a unui catod pentru baterii
activabile cu apa, obtinut din CuCl2. 2 H2O, simplu sau
amestecat cu AgCl sau Pb Cl2, care, dupa un tratament termic
gradat intre 180 si 135°C cu o viteza de incalzire care variaza intre 0,4 si
0,125°C/min, timp de cca. 4h, pentru CuCl2. 2 H2O si
intre 100 si 150°C la viteze variind intre 0,4 si 0,1°C/min, acelasi timp,
pentru CuCl2. 2 H2O - AgCl sau Pb Cl2, se
topeste si se toarna in cochilii inchise, sub presare peste firul colector,
iar dupa extractia din forma, electrodul se acopera cu o pelicula subtire
pentru protectie climatica si fotochimica prin imersie in sistemul AgCl-AgI
sau Pb Cl2, topit la 500°C.
|
6
|
http://www.cttecotech.ro/salon/postere/P684.pdf
|
0
|
685
|
Sandu Ion, Marcuta Mihai, Anghel Ion, Taraboanta Irina, Sahleanu Vasile,
Bejan Dorin, Miron Costica
|
Procedeu de obtinere a electrolitului solid pe baza de MnO2 din
structura condensatoarelor, cu anoda de tantal sinterizata
|
Inventia se refera la un procedeu de obtinere a electrolituluii solid, pe
baza de MnO2 din structura condensatoarelor, cu anoda de tantal
sinterizata si constituie o inventie complementara, la inventia principala
Brevet RO nr. 99585 si la inventia complementara Brevet RO nr.103903.
|
6
|
http://www.cttecotech.ro/salon/postere/P685.pdf
|
0
|
686
|
Sandu Ion, Mita Carmen, Cozma Danut Gabriel, Popescu Viorel, Rusu Ioan
|
Compozitie insecticida, biodegradabila
|
Inventia se refera la o compozitie insecticida, biodegradabila, utilizata in
combaterea gandacului de Colorado, de la stadiu de larva la adult, din
culturile de cartofi, tomate si vinete, care are un continut macerat de ardei
iute, moare de varza si ape rezultate de la topirea canepii, in raport
volumetric de 1 : 10 : 20.
|
6
|
http://www.cttecotech.ro/salon/postere/P686.pdf
|
0
|
687
|
Sandu Ion, Munteanu Cornelia, Ungureanu Cornelia, Muller Karol Heiuze,
Ghiroaga Doina
|
Procedeu de obtinere a feroborului
|
Inventia se refera la un procedeu de obtinere a feroborului cu concentratie
10…18% B, utilizat ca element de aliere. Procedeul utilizeaza doua procese
separate, primul de aluminotermie si al doilea de aliere, cand se obtine un
produs stabil, care are capacitate de dispersie, care consta in realizarea
conditiilor optime de reactie aluminotermica, utilizand un amestec format din
doua componete.
|
6
|
http://www.cttecotech.ro/salon/postere/P687.png
|
0
|
688
|
Sandu Ion, Munteanu Corneliu, Calugaru Gheorghe, Ungureanu Corneliu, Ghiroaga
Doina
|
Procedeu de obtinere a unui prealiaj de microaliere
|
Inventia se refera la un procedeu de obtinere a unui prealiaj, necesar
microalierii cu bor si aluminiu, in metalurgia neconventionala.
|
4
|
http://www.cttecotech.ro/salon/postere/P688.png
|
0
|
689
|
Sandu Ion, Nitescu Eftimie, Calu Nicolae, Berdan Ioan, Smocot Rodica, Bialus
Amediu, popa gabriel, Viscu Vasile, Stanila Alexandru
|
Procedeu si instalatie pentru obtinerea apei potabile
|
Inventia se refera la un procedeu si la o instalatie pentru obtinerea apei
potabile cu caracteristici fizico-chimice si organoleptice superioare.
Procedeul consta in aducerea apei tratate clasic in contact succesiv cu
materiale ceramice cu compozitie si structura determinate, cu rolul de a
realiza declorurarea, degazarea, absorbtia metalelor grele dizolvate,
septizarea si suprastructurarea biotica a apei.
|
1
|
http://www.cttecotech.ro/salon/postere/P689.pdf
|
0
|
690
|
Sandu Ion, Panait Sorin, Chifor Ovidiu, Ichim Vasile
|
Procedeu de recuperare a argintului si a suporturilor din materiale
fotografice uzate
|
Inventia se refera la un procedeu de recuperare a argintului si a
suporturilor de materiale fotografice uzate.
|
6
|
http://www.cttecotech.ro/salon/postere/P690.pdf
|
0
|
691
|
Sandu Ion, Panaite Sorin, Chifu Ovidiu, Samoil Gabriel
|
Procedeu de recuperare a argintului si a suporturilor materialelor
fotosensibile uzate
|
Prezenta inventie se refera la un procedeu de recuperare a argintului si a
suporturilor din materiale fotosensibile uzate.
|
6
|
http://www.cttecotech.ro/salon/postere/P691.pdf
|
0
|
692
|
Sandu Ion, Rosca Ion, Luca Constantin, Balasanian Ioan, Pintea Doina
|
Electrolit pentru stanare lucioasa
|
Se descrie modul de obtinere a unui electrolit pentru stanare lucioasa
|
6
|
http://www.cttecotech.ro/salon/postere/P692.gif
|
0
|
693
|
Sandu Ion, Rosca Ion, Rusan Viorica, Miron Costica, Colea Victor, Ciurescu
Toma
|
Procedeu de obtinere a peliculelor coloidale hidrofobizate, conductoare
electronic
|
Inventia se refera la un procedeu de obtinere a peliculelor coloidale
hidrofobiate, conductoare electronic, continue, aderente la substrat,
impermeabile pentru solutii apoase de electroliti, avand rol de protector
chimic si electrochimic.
|
6
|
http://www.cttecotech.ro/salon/postere/P693.png
|
0
|
694
|
Sandu Ion, Rusu Ioan, Mita Carmen, Popescu Viorel, Cozma Danut
|
Procedeu de preparare a suprafetelor lucioase, neaderente
|
Inventia se refera la un procedeu de preparare a suprafetelor lucioase,
neaderente, in scopul de a permite scrierea cu tusuri sau cerneluri normale.
|
6
|
http://www.cttecotech.ro/salon/postere/P694.pdf
|
0
|
695
|
Sandu Ion, Rusu Ioan, Plahteanu Boris, Palihovici Valerian, Munteanu
Corneliu, Veriga Ioan
|
Procedeu de obtinere a unor aliaje tipografice peliculizate
|
Inventia se refera la un procedeu de obtinere a unor aliaje tipografice
peliculizate, cu straturi superficiale de protectie peliculara, aplicarea
acestora realizandu-se prin sitare pe suprafata aliajelor topite dupa
indepartarea zgurii formate, o pelicula topita constituita din ioduri de
plumb, stibiu si staniu in raport in greutate de 3 : 2 : 1, iar dupa 10
minute de stabilizare a peliculei, se suprapune un alt strat cu o grosime de
4…8 mm, de tip gaz-difuz continuu, constituit din doua amestecuri omogene in
raport 1 : 1, unul din aceste amestecuri fiind alcatuit din carbonat de sodiu
si carbune activ, in raport in greutate de 2 : 3, iar celalalt amestec fiind
alcatuit din acetat de sodiu, formiat de sodiu si negru de fum in raport in
greutate de 1 : 2 : 7.
|
6
|
http://www.cttecotech.ro/salon/postere/P695.pdf
|
0
|
696
|
Sandu Ion, Sandu Emilia, Sandu Irina
|
Procedeu de curatire si conservare a obiectelor vechi, din lemn
|
Inventia se refera la un procedeu de curatire si conservare a obiectelor
vechi, din lemn, cu pastrarea patinei, in scopul de a mari rezistenta
acestora si a reface aspectul estetic. In cadrul acestui procedeu, obiectele
din lemn se spala, la suprafata, cu o solutie alcoolica detergenta, cu rol de
indepartare a depunerilor superficiale, apoi se lipesc pentru repararea
eventualelor defecte, cu o dispersie apoasa, concentrata, pe baza de clei de
oase, se retuseaza cu chit de spaclu, dupa care se impregneaza cu o solutie
pe baza de petrol lampant si/sau terebentina, continand compusi organici,
puternic bactericizi, insecticizi si fungicizi, aplicata prin ungere, imersie
sau injectare in galeriile cariilor, operatiile putand fi repetate daca este
necesar.
|
4
|
http://www.cttecotech.ro/salon/postere/P696.png
|
0
|
697
|
Sandu Ion, Serbanescu Constantin, Furnica Emilian, Balan Traian, Taraboanta
Irina, Bejan Dorin, Dumitrescu Lucius
|
Procedu de obtinere a varistorilor ceramici
|
Procedeul consta in obtinerea granulelor conductoare electronic, a celor
dielectrice si a particulelor spinelice prin coprecipitare secventiala in
sistem apos.
|
6
|
http://www.cttecotech.ro/salon/postere/P697.pdf
|
0
|
698
|
Sandu Ion, Vicol Olga, Ghiurau Aron, Luputiu Mircea, Popa Liviu, Miloi
Alexandru, Vasiliu Iulian
|
Procedeu de obtinere a unui catod pentru baterii activabile cu apa de mare
|
Inventia se refera la un procedeu de obtinere a unui catod pentru baterii
activabile cu apa de mare, pe baza de sulf dopat cu mase grafitice coloidale
(grafit coloidal si negru de fum), clorura de argint sau clorura cuproasa in
rapoarte gravimetrice: S:C:M’Cl = 65:30:5, care dupa topire, se preseaza peste
un fir colector din argint sau cupru argintat in forma paralelipipedica
aplatizata. Electrozii astfel obtinuti se folosesc drept catozi in baterii
activabile cu apa din clasa sistemelor cu anozi din magneziu, zinc, aluminiu
sau fier.
|
6
|
http://www.cttecotech.ro/salon/postere/P698.png
|
0
|
699
|
Sandu Ion, Caea Nicoleta, Vasilache Viorica, Sandu Irina Crina Anca, Cadu
Elena
|
Dispersie organica de gresare si aseptizare a suporturilor pe baza de
pergament
|
Inventia se refera la o dispersie organica hidroalcoolica sinergica,
utilizata in procesele de emoliere si aseptizare a suporturilor pe baza de
pergament
|
6
|
http://www.cttecotech.ro/salon/postere/P699.pdf
|
0
|
700
|
Sandu Ion,Stanila Alexandru, Ciurescu Toma, Stanila Aneta
|
Procedeu de aditivare in scopul prevenirii aglomerarii liantilor hidraulici
|
Se descrie procedeul de aditivare in scopul prevenirii aglomerarii liantilor
hidraulici
|
6
|
http://www.cttecotech.ro/salon/postere/P700.gif
|
0
|
701
|
Sandu Ion; Roman Ghiorghe; Stanciu Alexandru; Sandu Ioan Gabriel; Sandu Irina
Crina Anca; Stanciu Constantin
|
Procedeu de purificare a apelor uzate industriale si menajere
|
Inventia se refera la un grup de procedee de purificare a apelor industriale
si menajere uzate care contin agenti poluanti solubili sau insolubili, de
natura anorganica sau organica
|
1
|
http://www.cttecotech.ro/salon/postere/P701.doc
|
0
|
702
|
Sandu I.
si al.
|
Procedee de conservare a lemnului natur si policrom din structura bunurilor
de patrimoniu cultural
|
Procedee de conservare a lemnului natur si policrom din structura bunurilor
de patrimoniu cultural prin folosirea unor solutii organice cu actiune
sinergica insecto-fungicidica.
|
19
|
http://www.cttecotech.ro/salon/postere/P702.doc
|
0
|
703
|
Sandu Ion; Dobre Corneliu; Sandu Ioan Gabriel, Sandu Andrei Victor
|
Procedee de obtinere a unor esente solide aromatice
|
Se prezinta un grup de procedee pentru obtinerea esentelor solide aromate,
utilizate la obtinerea aerosolilor terapeutici si ambientali sau pentru
ritualuri religioase
|
19
|
http://www.cttecotech.ro/salon/postere/P703.doc
|
0
|
704
|
Sandu Ioan Gabriel, Dima Adrian, Sandu Ion, Ioan Carmen, Vasilache Maricica,
Roibu Luminita, Sandu Andrei-Victor, Bounegru Tudor, Roibu Laurentiu
|
Procedeu de consolidare a frescelor vechi
|
Inventia se refera la un grup de solutii bazice organice,
sub forma unor dispersii submicronice pe baza de alcooli, care contin
dispersat
Ca(OH)2
si Ba(OH)2 proaspat
preparat
|
19
|
http://www.cttecotech.ro/salon/postere/P704.doc
|
0
|
705
|
Sandu Ioan Gabriel, Dima Adrian, Sandu Ion, Bounegru Tudor, Roibu Luminita,
Sandu Andrei-Victor, Roibu Laurentiu
|
Procedee de repatinare a artefactelor metalice dupa procesele de restaurare
|
Se prezinta un grup de procedee de repatinare a pieselor metalice din bronz
si fer restaurate pentru refacerea aspectului estetic
|
19
|
http://www.cttecotech.ro/salon/postere/P705.doc
|
0
|
706
|
Sandu Irina Crina Anca, Sandu Ion, Nica Gheorghe, sandu Ioan-Gabriel
|
Solutie organica pentru conservarea si antiseptizarea suporturilor din lemn
vechi policrom
|
Inventia se refera la o solutie organica utilizata in conservarea si
antiseptizarea suporturilor din lemn vechi policrom, utilizat de exemplu in
tratarea iconografiei statice si mobile, a catapetesmelor, a stranelor, a
analogurilor, a iconostasurilor din spatiile eleziastice ortodoxe sau altor
obiecte de arta din patrimoniul national, confectionate din lemn (troite,
mobilier stil, sculpturi, lambriuri binale etc.).
|
6
|
http://www.cttecotech.ro/salon/postere/P706.pdf
|
0
|
707
|
Sandu Irina Crina Anca; Sandu Ioan Gabriel; Cudelcu Dragos Teodor
|
Procedeu de obtinere a unui pigment galben de crom
|
Inventia se refera la un procedeu de obtinere a unui pigment galben de crom
termorezistiv, prin coprecipitarea cationilor Pb2+ si Zn2+
cu anionii CrO42-
si PO43-
. Pigmentul prezinta culoare uniforma si grad mare de acoperire.
|
19
|
http://www.cttecotech.ro/salon/postere/P707.pdf
|
0
|
708
|
Sandu Irina Crina Anca; Sandu Ioan Gabriel; Cudelcu Dragos Teodor; Nicula
Steluta
|
Metode pentru determinarea vechimii materialelor celulozice din structura
obiectelor de arta
|
Inventia se refera la doua metode de determinare a vechimii materialelor
celulozice din structura suporturilor textile si a celor papetare din
patrimoniul cultural national.
|
19
|
http://www.cttecotech.ro/salon/postere/P708.pdf
|
0
|
709
|
Sandu Irina Crina, Vornicu Nicoleta, Sandu Ioan-Gabriel, Vornicu Cristina,
Nicula Steluta
|
Metoda pentru aseptizarea « in-situ » a depozitelor de carte
|
Inventia se refera la o metoda directa de dezinfectie si dezinsectie a depozitelor
de carte, prin tratare secventiala cu aeroioni negativi si pozitivi,
utilizand fie un generator tip turbina, cu suflanta in doua trepte.
|
4
|
http://www.cttecotech.ro/salon/postere/P709.pdf
|
0
|
710
|
Sava Doru Cornel, Jinaru Aron, Cojocaru Florea
|
Tub fluorescent
|
Inventia se refera la reducerea consumului de energie electrica cu cel putin
50% pentru producerea fluxului luminos de uz casnic, de iluminare
industriala, publica, etc. prin realizarea unui tub fluorescent precum si
oferirea unor solutii constructive ecologice prin reducerea si eliminarea
vaporilor de mercur
|
2
|
http://www.cttecotech.ro/salon/postere/P710.png
|
0
|
711
|
Savu Doru Cornel
|
Instalatie pentru evitarea rasturnarii ambarcatiunilor usoare
|
Inventia se refera la elaborarea unei instalatii pentru evitarea rasturnarii
ambarcatiunilor usoare, dstinata controlului momentelor mecanice de ruliu la
ambarcatiunile usoare cu catarg, precum si pentru readucerea acestor
ambarcatiuni in pozitie covenabila, cand au fost rasturnate.
|
15
|
http://www.cttecotech.ro/salon/postere/P711.gif
|
0
|
712
|
Savulescu Stefan, Godeanu Marioara, Stanca Doina
|
Dispozitiv si metoda de fragmentare a filamentelor multicelulare si a
peretilor celulari de fitoplancton
|
Inventia se refera la un dispozitiv si la o metoda de fragmentare a
filamentelor multicelulare si a peretilor celulari de fitoplancton prin
vortexare. Metoda consta in introducerea lichidului in dispozitiv, realizarea
curgerii elicoidale trifazice, prelevarea probelor si examinarea lor la
microscop, ruperea membranelor si colectarea lichidului celular in solutie.
|
1
|
http://www.cttecotech.ro/salon/postere/P712.jpg
|
0
|
713
|
Segal Brad, Segal Rodica, Georgescu Draguta
|
Procedeu de obtinere a unui emulgator alimentar
|
Prezenta inventie se refera la un procedeu de obtinere a unui emulgator
alimentar pe baza de produse bogate in amidon, utilizat pentru obtinerea unei
game largi de produse: creme, inghetate, sosuri, preparate de carne, produse
de panificatie etc.
|
7
|
http://www.cttecotech.ro/salon/postere/P713.doc
|
0
|
714
|
Shandibin V.
|
Tea-Music Ceremony – integrative method of psychosomatic improvement and
development of one’ potential
|
Tea-music ceremony gives possibility to receive energy of nature, it
vibrations through sound, smell, aroma, taste and image. Integration of tea
ceremony with music-therapy intensify healthy influence to one’s organizm.
This integrative method open new approach to spiritual force of tea with
using technologies of Theory of Causality and Runic technologies.
|
11
|
|
0
|
715
|
Simaschevici Alexei , Gasin Petru, Ludmila Gagara,
|
Fotocondensator cu semiconductori
|
The electromagnetic radiation recording divice on the base of ITO-ZnO-ZnSe
structures poseses a high capacitance sensitivity –10E4 mW-1 in 0,35 – 0,52
mkm spectral region. It can be successfully used for ultraviolet and blue
radiation detectors.
|
2
|
http://www.cttecotech.ro/salon/postere/P715.png
|
0
|
716
|
Spanu C., T. Holban, P. Chintea, I. Spanu, V. Diatisin
|
Metoda de tratament a hepatitei acute virale B
|
Terapia de baza este suplimentata cu „Pacovirin” – remediu autohton de
origine vegetala, nu are analog în lume, micsoreaza semnificativ durata
icterului, sindromului de intoxicatie, sindromului citolitic si colestatic,
normalizeaza valoarea indicelui protrombinic, probei cu timol si CIC, reduce
semnificativ perioada de spitalizare a bolnavului, conduce spre eliminarea
mai rapida a virusului din organism, evitând cronicizarea maladiei.
|
11
|
http://www.cttecotech.ro/salon/postere/P716.png
|
0
|
717
|
Spanu C., Barca L., Scoferta P., Spînu I., Chintea P., Holban T.
|
Metoda de tratament a infectiei cu Herpes simplex
|
Includerea în tratamentul herpesului genital si labial a adaptogenilor
naturali (pacovirina, pavstim, capsicozid etc.) cu activitati antivirale,
interferonogene, imunomodulatoare, antioxidante, imunomediatoare,
înregistrati de catre Ministerul Sanatatii si Protectiei Sociale si produsi
de S.A. „Farmaco”, reduce la minimum numarul de recidive.
|
11
|
|
0
|
718
|
Spanu C., Barca L., Scoferta P., Vutcariov V.
|
Metoda de evaluare a anticorpilor rotavirali
|
Tehnologie originala de diagnostic de laborator cu elemente de biologie
moleculara la infectia rotavirala, efectuata la nivel de expres-diagnostica,
care cardinal modifica schema de tratament a gastroenteritelor acute, evitând
dezvoltarea dismicrobismului si semnificativ sporind eficacitatea
tratamentului etiopatogenic la copii
|
11
|
|
0
|
719
|
Spanu C., Chintea P.
|
Procedeu de obtinere a 5a-furostan-3b,22,26-triol-3-[O-b-D-glucopiranozil
(1®2) - b - D - glucopiranozil (1®4)- b-D-galactopiranozil]-26-O-b-D-glucopiranozid
(pacovirinei
|
Modernizarea tehnologiei de obtinere a componentilor produsului medicamentos
„Pacovirin” reduce esential numarul etapelor de preparare si, respectiv,
timpul de obtinere a remediului medicamentos, nemodificând calitatea si
randamentul efectului terapeutic si profilactic
|
11
|
|
0
|
720
|
Spanu C., GhidirimV., Scoferta P.
|
Procedeu de diferentiere intratip a tulpinelor de virus poliomielitic
|
Tehnologia diferentierii include cultivarea tulpinelor de virus în culturi
celulare continui si primar-tripsinizate diferit permisibile pentru
reproducerea virusurilor de poliomielita: vaccinali, intermediari si
salbatici. Algoritmul diferentierii virusurilor de poliomielita deja patentat
a fost valorificat prin includerea acestui marcher genetic în Programul
National de eradicare a poliomielitei din Republica Moldova.Traducerea în
viata acestui Program a permis Organizatiei Mondiale a Sanatatii de a înmâna
Republicii Moldova certificat de tara libera de poliomielita în Europa.
|
11
|
http://www.cttecotech.ro/salon/postere/P720.doc
|
0
|
721
|
Spanu C., P.Chintea, V.Vutcariov
|
Biosistem întru evaluarea gradului de atenuare a virusului poliomielitic
|
Este descoperit un nou marcher genetic al virusului poliomielitic, care este
evidentiat prin cultivarea tulpinelor de virus în prezenta derivatului
chimic: triatid – (25 S)-5a- 3ß – 22 a, 26 triol – 26 – 0 – ß – D –
glicopiranozid.Rezultatele au fost confirmate prin tehnici de amplificare
genica,iar testul valorificat în practica medicala prin includerea lui în
Programul National de eradicare a poliomielitei în Republica Moldova.
|
11
|
http://www.cttecotech.ro/salon/postere/P721.doc
|
0
|
722
|
Spanu C., V.Vutcariov
|
Dispozitiv intru realizarea reactiei de aglutinare
|
Testul se realizeaza dupa principiul ELISA, în plansete de polisterol unde
peretii godeurilor sunt sensibilizati cu anticorpi monoclonali strict
determinati. Diagnosticul include segmentul activ al anticorpilor (deja
fractionati în FA si FC) ficsati pe particule de celuloza, care la rîndul lor
includ un miez de fier – magnet. Dupa realizarea reactiei planseta de
polisterol este fixata pe un dispozitiv cu sursa de magnet care face posibil
sedimentarea particulelor nefixate. Testul reduce timpul de evaluare
(diagnosticare) pâna la o minuta.
|
11
|
http://www.cttecotech.ro/salon/postere/P722.doc
|
0
|
723
|
Spanu C., T.Holban, P.Scoferta, I.Spanu
|
Metoda de diminuare a intensitatii raspunsului imun
|
Esenta inventiei consta în descoperirea unei noi activitati terapeutice
suplimentare a produsului medicamentos „Pcovirin” utilizat în tratamentul
hepatitelor virale, infectiei cu herpes, gripa etc si care se reduce la
diminuarea raspunsului imun, apreciat prin nivelul de citokine
proinflamatorii IL - 1ß, valoarea caruia coreleaza cu gradul de lezare a
tesuturilor organice implicate în procesul patologic.Remediul nominalizat
este valorificat prin includerea lui în Programul Unic de asigurari medicale
obligatorii în teritoriul administrativ al Republicii Moldova.
|
11
|
http://www.cttecotech.ro/salon/postere/P723.doc
|
0
|
724
|
Spanu C., T.Holban, P.Chintea, L.Bîrca, I.Spânu, V.Vutcariov
|
Metoda de diminuare a reactiei inflamatorii în infectiile virale
|
Esenta inventiei consta în descoperirea unei noi activitati terapice a
„Pacovirin” –ei , utilizate în tratamentul hepatitelor virale B, C si care se
reduce la diminuarea substantiala a reactiei de inflamare a mezinhimala a
ficatului, apreciata dupa nivelul seric de Tumor – Necrosis – Factor – α (TNF- α), valoarea caruia coreleaza cu
activitatea procesului infectios hepatic, gradul de manifestare a sindromului
citolitic si a sindromului de inflamare mezinhimala. Produsul este
valorificat prin fabricarea în baza SA „Farmaco” si realizat prin reteaua
farmaceutica.
|
11
|
http://www.cttecotech.ro/salon/postere/P724.doc
|
0
|
725
|
Spanu C., P.Chintea
|
Inhibitor de rotavirusuri
|
Este patentat un adaptogen natural de origine vegetala (Capsicozid) , care
demonstreaza activitate antivirala semnificativa fata de rotavirusuri –
agentul cauzal al gastroenteritelor la copii. Este valorificat prin
producerea industriala a remediilor medicamentoase în compania SA „Farmaco”
si implementarea prin intermediul unei monografii recent publicate în
procesul didactic la Universitatea de Stat de Medicina si Farmacie
„N.Testemitanu”
|
11
|
http://www.cttecotech.ro/salon/postere/P725.doc
|
0
|
726
|
Spanu C., P.Chintea, V.Vutcariov
|
Remediu de inactivare a rotavirusurilor
|
Remediu medicamentos (Tomatozid) de origine vegetala , totalmente lipsit de
efecte adverse, nu are analog în lume, efectiv în tratamentul diareei acute
la copii, etiologic cauzate de rotavirusuri, valorificat în practica medicala
prin fabricarea industriala în baza SA „Farmaco”. Comparabil dupa eficacitate
cu produsele din grupa interferonilor, dar de zeci de ori mai econom, lipsit
de contraindicatii si accesibil pentru toate paturile de populatie.
|
11
|
http://www.cttecotech.ro/salon/postere/P726.doc
|
0
|
727
|
Spanu C., Ramis C., Iarovoi P., Spanu I.
|
Procedeu de vaccinare contra hepatitelor virale
|
Procedeu de vaccinare contra hepatitelor virale care include imunizarea
persoanelor cu status imun normal sau compromis (persoane imunorefractoare),
caracterizat prin faptul, ca intru sporirea semnificativa a raspunsului imun,
inclusiv a eficacitatii vaccinarii, concomitent cu administrarea vaccinului
contra hepatitei virale B se utilizeaza „Pacovirin”- a – pastile, timp de 90
zile, începand cu prima zi de administrare a vaccinului, care contribuie la
intensificarea procesului de imunogeneza manifestat printr-un titru
evidentiat de anticorpi protectori.
|
11
|
http://www.cttecotech.ro/salon/postere/P727.doc
|
0
|
728
|
Spanu C., P.Scoferta, I.Spanu, E. Romancenco
|
Metoda de profilaxie a gripei
|
Metoda de profilaxie a gripei, e caracterizata prin faptul, ca în perioada
preepidemica si epidemica a morbiditatii prin influenza (gripa umana si
aviara) se administreaza produsul medicamentos „Pacovirin” – pastile cu
actiune antivirala, imunomodulatoare, interferonogena, imunomediatorie si
antioxidanta timp de 15 -90 zile , ce reduce incidenta morbiditatii de 3,6
ori, iar indicele de protectie constituind pâna la 75,0%. Preparatul
nominalizat totalmente nu dezvolta efecte adverse, este accesibil pentru
toate paturile de populatie, inclusiv cu risc majorat de a face gripa.
|
11
|
http://www.cttecotech.ro/salon/postere/P728.doc
|
48
|
729
|
Spanu C., Holban T., Chintea P., Bîrca L., Spînu I., Scoferta P.,
|
Metoda de tratament a hepatitei virale cronice C
|
Tratamentul infectiei nominalizate include utilizarea produsului medicamentos
autohton „Pacovirin” de origine vegetala, care nu are analog în lume, pe
parcursul a 9-12 luni. Produsul demonstreaza rezultate comparative cu
standardul de aur existent în tratament, este lipsit totalmente de efecte
adverse, are un sinecost redus de cel putin 10 ori. Preparatul este
înregistrat de catre Ministerul Sanatatii si Protectiei Sociale si produs de S.A.
„Farmaco”, întrodus în Programul Unic de Asigurari Medicale Obligatorii.
|
11
|
|
0
|
730
|
Spanu C., I. Spanu, L. Bîrca, P. Scoferta, P. Chintea, V. Vutcariov
|
Remediu antiherpetic
|
Tratamentul primar si antirecidivant al infectiei cu virusul Herpes simplex
include produse autohtone, înregistrate de catre Ministerul Sanatatii si
Protectiei Sociale, fabricate în baza S.A. „Farmaco. Efectul curativ si
profilactic este cauzat de faptul, ca unul si acelasi produs îmbina multiple
activitati terapeutice: antivirala, imunomodulatoare, interferonogena,
imunomediatoare si antioxidanta.
|
11
|
|
0
|
731
|
Spanu C., P. Scoferta, A. Stamati, L. Bîrca, I. Spînu, P. Chintea
|
Remediu cu actiune intefreonogena
|
Produsele medicamentoase autohtone d origine vegetala demonstreaza capacitati
avansate de inducere a interferonului endogen la bolnavii cu hepatite virale
B, C, D; infectii cu herpes simplex, cu Cytomegalovirus, gripa etc. tratate
cu aceste preparate. Predomina inducerea sintezei de interferon α, comparativ cu
interferoanele ß si γ.
|
11
|
|
0
|
732
|
Speteanu Rozalia, Brad Ion, Cismaru Stanca, Petrescu Mioara
|
Crema de masaj
|
Inventia se refera la o crema de masaj. Sunt cunoscute diferite creme de
masaj in compozitia carora intra ulei de marmota, dar acestea prezinta
dezavantajul ca nu asigura epidermei aportul d substanta biostimulatoare.
|
12
|
http://www.cttecotech.ro/salon/postere/P732.doc
|
0
|
733
|
Speteanu Rozalia, Brad Ion, Cismaru Stanca, Petrescu Mioara
|
Lotiune tonica pentru ten
|
Inventia se refera la o lotiune tonica utilizata pentru ingrijirea tenului,
compatibila cu epiderma, cu actiune hidratanta, biostimulatoare si
trofodermica.
|
12
|
http://www.cttecotech.ro/salon/postere/P733.doc
|
0
|
734
|
Speteanu Rozalia, Brad Ion, Petrescu Mioara, Cismaru Stanca,
|
Sampon
|
Inventia se refera la un sampon destinat spalarii parului, care ajuta la
refacerea tesuturilor superficiale, are actiune antifungica si de stimulare a
metabolismului celular..
|
12
|
http://www.cttecotech.ro/salon/postere/P734.doc
|
0
|
735
|
Speteanu Rozalia, Brad Ion, Cismaru Stanca, Petrescu Mioara
|
Spumant de baie
|
Inventia se refera la un spumant de baie utilizat in cosmetica, cu avantajul
ca indeparteaza senzatia de oboseala, dand pielii un aspect placut,
catifelat..
|
12
|
http://www.cttecotech.ro/salon/postere/P735.doc
|
0
|
736
|
Speteanu Rozalia, Brad Ion, Cismaru Stanca, Silva Felix
|
Lotiune utilizata inainte de plaja
|
Inventia se refera la o lotiune utilizata inainte de plaja, cu actiune
protectoare fata de razele ultraviolete si infrarosii.
|
12
|
http://www.cttecotech.ro/salon/postere/P736.doc
|
0
|
737
|
Speteanu Rozalia, Brad Ion, Petrescu Mioara, Cismaru Stanca
|
Crema nutritiva de noapte
|
Inventia se refera la o crema nutritive de noapte, cu un continut sporit de
vitamine, datorat extractului lichid de Hippophae rhamnoides.
|
12
|
http://www.cttecotech.ro/salon/postere/P737.doc
|
0
|
738
|
Speteanu Rozalia, Brad Ion, Petrescu Mioara, Cismaru Stanca
|
Crema emolienta pentru ochi
|
Inventia se refera la o crema emolienta pentru ochi, utilizata pentru
prevenirea ridurilor, cat si la procedeul de preparare. Crema contine extract
liposolubil si hidrosolubil de Hippophae rhamnoides.
|
12
|
http://www.cttecotech.ro/salon/postere/P738.doc
|
0
|
739
|
Speteanu Rozalia, Brad Ion, Petrescu Mioara, Silva Felix
|
Emulsie cosmetica utilizata dupa plaja
|
Inventia se refera la o emulsie cosmetica utilizata dupa plaja, asigurand o
refacere rapida a tesuturilor pielii..
|
12
|
http://www.cttecotech.ro/salon/postere/P739.doc
|
0
|
740
|
Speteanu Rozalia, Cismaru Stanca, Brad Ion, Petrescu Mioara
|
Lotiune tonica utilizata dupa barbierit
|
Inventia se refera la o lotiune tonica utilizata dupa barbierit, cu actiune
trofidermica si de refacere a tesuturilor superficiale, fiind usor
astringenta.
|
12
|
http://www.cttecotech.ro/salon/postere/P740.doc
|
0
|
741
|
Staicovici Mihai Dan, Chebeleu Ioan, Blaga Nicoleta, Blaga Iuliu Ion, Voda
Mihai, Ghiordanescu Victor, Trutia Athanasie, Ionasek Theodor
|
Element absorbant sub forma de placa pentru captarea energiei solare si
procedeu de obtinere a acestuia
|
Element absorbant sub forma de placa pentru captarea energiei solare, format
dintr-un suport acoperit cu straturi absorbante si reflectante.
|
1
|
http://www.cttecotech.ro/salon/postere/P741.ppt
|
0
|
742
|
Stanila Alexandru, Mihul Anatolie, Stanila Aneta, Sandu Ion, Mihai Cristian
Daniel, Prisicaru Oswald
|
Fundatie directa pe cheson cu talpa extensibila
|
Inventia se refera la descrierea fundatiei directe pe cheson cu talpa
extensibila
|
4
|
http://www.cttecotech.ro/salon/postere/P742.gif
|
0
|
743
|
Stanila Alexandru, Silion Tudor, Stanila Aneta, Sandu Ion, Balacescu Albert
Tony
|
Dispozitiv de urmarire si semnalizare a alunecarilor de teren
|
Inventia se refera la descrierea unui dispozitiv de urmarire si semnalizare a
alunecarilor de teren
|
1
|
http://www.cttecotech.ro/salon/postere/P743.gif
|
0
|
744
|
Stanila Alexandru, Silion Tudor, Stanila Aneta, Sandu Ion, Vieriu Eugen,
Stirbu Radu, Carpiuc Mihai
|
Fundatie directa pe cheson poligonal
|
Inventia descrie fundatia directa pe cheson poligonal
|
4
|
http://www.cttecotech.ro/salon/postere/P744.gif
|
0
|
745
|
Stanila Alexandru, Stanila Aneta, Sandu Ion, Tataru Liviu, Gradinaru Petrica,
Barzavu Vladimir
|
Instalatie pentru realizarea unor console laterale la fundatiile pe chesoane
si procedeu pentru realizarea acestora
|
Inventia descrie instalatia pentru realizarea unor console laterale la
fundatiile pe chesoane si procedeu pentru realizarea acestora
|
3
|
http://www.cttecotech.ro/salon/postere/P745.gif
|
0
|
746
|
Stefanescu Paul, Godeanu Marioara
|
Produs alimentar din boabe de soia si procedeu de obtinere a acestuia
|
Inventia se refera la un produs alimentar din boabe de soia si la un procedeu
de obtinere a acestuia. Produsul obtinut poate fi consumat ca atare sau
constituie materie prima, in vederea obtinerii de noi produse zaharoase
si/sau noi compozitii in industria grasimilor vegetale.
|
7
|
http://www.cttecotech.ro/salon/postere/P746.gif
|
0
|
747
|
Stefirta Anastasia
|
Procedeu de cultivare a plantelor de castraveti
|
During years of laboratory and field experiences, the
possibility of exogenous regulation of growth and fruitification processes of
Cucumis sativus L. plants was studied by utilizing thrinuclear clusters with
[Fe3+CO], which contain in their molecule vitamin PP(B5) – conventional
trifenamid. A positive effect of these compounds was established on
germination energy and growth processes already at initial stages of
ontogenesis, as well as on productivity elements formation at mature plants.
The maximum effect on productivity and yield was registered at plants treated
with trifenamid. The experimental results serve as argument for practice
utilization of compounds derived from vitamin PP in the scope of more
advantageous realization of genetic potential of Cucumis sativus L. plants.
|
9
|
http://www.cttecotech.ro/salon/postere/P747.png
|
0
|
748
|
Stockel S. si al.
|
Procedeu de obtinere a polifenilenoxidului bromurat
|
Obtinerea unui polimer cu grupare functionala activa utilizat la prepararea
de membrane schimbatoare de ioni, pentru separarea gazelor sau ca suport
pentru fixarea de enzime.
|
6
|
http://www.cttecotech.ro/salon/postere/P748.png
|
0
|
749
|
Stoenescu Ghe.
|
Cutie de valori, cu dispozitiv de inchidere
|
Inventia se refera la o cutie de valori (bani, acte, bijuterii…) dotata cu dispozitiv
de inchidere. Cutia consta din doua placi plane solidarizate prin surub care
tine „prizonieri” peretii 2, 3 si 4. Peretele 3 este capacul cutiei. Al
patrulea perete este o rigla 5. Translatia riglei de-a lungul muchiei cutiei
este permisa sau nu prin manevra unor piese de cifru 6.
|
17
|
http://www.cttecotech.ro/salon/postere/P749.ppt
|
0
|
750
|
Stoenescu Ghe.
|
Racheta de tenis, coarda din material plastic pentru reglarea cordajului
rachetei si procedeu de realizare a cordajului
|
Conform cu inventia, coarda pentru realizarea cordajului rachetei este in
sectiune de forma rectangulara. Procedeul de realizare a cordajului consta in
aceea ca intreteserea corzilor se realizeaza intr-o pozitie rotita cu 450
fata de axul longitudinal al rachetei, fapt care reduce miscarea relativa a
firelor fata de geometria lor initiala.
|
17
|
http://www.cttecotech.ro/salon/postere/P750.png
|
0
|
751
|
Stoian Adrian
|
Vas cu incalzire electrica
|
The invention relates to an electrically heated vessel for household or travel
purposes, meant to be used for heating and/or cooking food, e.g. tea or
meals. According to the invention, the electrically heated vessel comprises a
vessel made up of dielectric material, two disk-shaped electrodes, a bowl
provided with some passes and some spurs, for securing and supporting a metal
vessel coated with dielectric material, e.g. enamel, inside where there are
the useful water content and food ingredients, and a gap separating the metal
vessel from the vessel which contains the water employed only for heating,
the gap extending into a handle having a funnel-shape, the upper part
continuing with a vertical branch useful for viewing the level of the heating
water in the vessel and completing it through the funnel, when necessary.
|
3
|
http://www.cttecotech.ro/salon/postere/P751.png
|
0
|
752
|
Stoian Adrian
|
Dispozitiv de suspendare si fixare a perdelelor
|
The invention refers to a device for hanging curtains made of textile and
other materials, used for interior decorations, in order to obtain a tidy
appearance. According to the invention, the curtain hanging and fixing device
comprises a stiff support from non-magnetic material, in the form of a rod
whereon some supporting rings glide, the said rings having on their lower
part some clips for gripping a curtain, each supporting ring being located
over a permanent cylindrical magnet being mounted so that, due to the
magnetic force of repulsion between the two adjacent magnets, the rings be
placed at equal distances relative to one another on the entire length of the
bearing support.
|
3
|
http://www.cttecotech.ro/salon/postere/P752.png
|
0
|
753
|
Stoian Adrian
|
Plita electrica
|
The invention relates to a household or voyage electric stove for heating
vessels of various dimensions and contents with variable weights. According
to the invention, the electric stove consists of a central metal disc located
at a determined height against a metal ring concentric with the metal disc
which, in its turn is located at a height determined relative to another
metal ring concentrical with the metal disc, all being sustained relative to
a metal plate by some springs which ensure the vertical movement of the metal
disc and of the two metal rings depending on the weight and dimension of the
used vessel, the discs determining the successive and independent
closing/opening of some electric circuits formed by some resistors and some
microswitches driven by some limiting rods, each of them fastened to the
metal disc and the metal rings .
|
3
|
http://www.cttecotech.ro/salon/postere/P753.png
|
0
|
754
|
Stoian Adrian
|
Grebla
|
The invention refers to a rake for household use, for gardening, cleaning the
lawns and the green grass among the trees and other similar spaces, saving time
by fast cleaning the teeth. According to the invention, the rake is provided
with teeth cleaning system, made up of a cross support, having some rings
which glide along some teeth mounted on a beam which is continued with a
metal cylindrical support on which there glides a sleeve limited, while is
moving, by a collar acting on an elastic lamella mounted on the cross support
and on the cylindrical support, determining the movement of the rings and the
returning thereof, under the action of some curved laminated springs.
|
9
|
http://www.cttecotech.ro/salon/postere/P754.png
|
0
|
755
|
Stoica Ligia, Filip Dorin, Aurelian Florian, Vacariu Vintila Teodoru
|
Procedeu de separare a componentelor organice, a molibdenului si a silicei
coloidale din solutii uranifere
|
The procedure according to the invention consists of
uranium-bearing solution acidification to a pH =1.5; solution filtration,
filtrate treatment with active carbon and the effluent treatment with sodium
carbonate. A pre-purified technical concentrate is separated from the final
solution using the precipitation with sodium hydroxide.
|
5
|
http://www.cttecotech.ro/salon/postere/P755.png
|
0
|
756
|
Subbota N.
|
Biostimulator «Zriohor» and Method of it Getting
|
Biostimulator on the basis of extract of man’ horion, what getting with using
of cycles of freeze-warm, centrifugation, separation of last product with
next freeze.
|
11
|
|
0
|
757
|
Svet S. si al.
|
Procedeu de obtinere a substantelor biologic active si utilizarea lor pentru
sporirea productiei semintelor hibride
|
Substantele biologic active se obtin din semintele de Atropa belladonna,
radacini de Solanum melongena care sporesc productivitatea semintelor
hibride, ceea ce ofera posibilitatea de a largi spectrul varietatilor genice
pentru a obtine noi forme productive de plante si soiuri.
|
9
|
http://www.cttecotech.ro/salon/postere/P757.png
|
0
|
758
|
Svichenskaya I.
|
Method of harmonical development of person
|
Invention directed to restoration of harmony in one and awakening of creative
activity of a person. Open possibility for optimal conditions during study
and cognitive processes without of traumatic factors. Small expense.
Effective in pedagogic and development of person. From age of 3 years.
|
11
|
|
0
|
759
|
Szabo Sigfrid
|
REG-ENOR
|
Medicament cu componente polifenolice din sambure de grape fruit cu rol
antioxidant de protectia organismului uman.
|
12
|
|
0
|
760
|
Tamas, R., Pop, I.I., Deacu, L
|
Mecanism de deplasare liniara proportionala pentru roboti
|
Inventia descrie mecanismul de deplasare liniara proportionala pentru roboti
|
3
|
|
0
|
761
|
Tataru Sever, Bobe Mircea, Vacariu Vintila -
|
Procedeu de recuperare a uraniului din apele muma rezultate la precipitarea
diuranatului de amoniu
|
The procedure according to the invention is allowing
uranium recovery from the residual waters resulted at DUA precipitation using
four basic operations: pH adjustment to 7, the extraction with naphtenic
acids diluted in kerosene uranium re-extraction from the organic phase with
an acid solution or with a cations exchange resin and the technical
concentrate precipitation using a basic reagent (NaOH or NH4OH).
|
5
|
http://www.cttecotech.ro/salon/postere/P761.png
|
0
|
762
|
Tataru Sever, Bejenaru Constantin, Aldea Aron, Bobe Mircea, Vacariu Vintila,
Filip Gheorghe, Matyas Carol
|
Procedeu de prelucrare a eluatilor uraniferi carbonatici
|
Procedeul, conform inventiei consta in tratarea eluatului cloro-carbonatic cu
rasini schimbatoare de cationi slab acid dupa o corectare necesara a pH-ului
si spalarea produsului final cu o solutie de sulfat de amoniu in scopul
imbunatatirii calitatii DUNa.
|
5
|
http://www.cttecotech.ro/salon/postere/P762.png
|
0
|
763
|
Tataru Sever, Bejenaru Constantin, Aldea Aron, Bobe Mircea, Vacariu Vintila,
Filip Gheorghe, Matyas Carol
|
Procedeu de obtinere a uraniului de puritate nucleara
|
The procedure according to the invention is consisting of
the uranium advanced concentration from ore lixiviation solutions, the
accompanying anions and cations removal using the alternation of anionic
exchange with the cationic one and finally using the evaporation. The
concentrated solution is treated with TBP and the final result is represented
by nuclear purity grade uranium.
|
5
|
http://www.cttecotech.ro/salon/postere/P763.png
|
0
|
764
|
Tataru Sever, Vacariu Vintila Teodoru
|
Procedeu de obtinere a peroxidului de uraniu direct in ciclul hidrometalurgic
|
The procedure according to the invention is consisting of
the chloride-carbonated elute treatment with slightly acid cations exchange
resins after the required pH adjustment, and the final product washing with
an ammonium sulfate solution with a view to improving the DUNa quality.
|
5
|
http://www.cttecotech.ro/salon/postere/P764.png
|
0
|
765
|
Theodoru S., Antohi Constantin, Lazarescu C.
|
Panou solar cu absorbtie multipla
|
The invention refers to a solar panel for warming the water used in domestic
activities. The panel is formed by a metallic case with isolation on the
interior, with metallic pipes inside, painted in black, welded between them
and from a support; through the spaces created circulates the water which is
heated due to multiple absorption of the caloric radiation by the black
surface of the pipes.
|
1
|
http://www.cttecotech.ro/salon/postere/P765.png
|
0
|
766
|
Tikerpuu L.
|
Resonator «Fractal of Organization of Space-Time»
|
Device for organization space-time, produced on the basis of fractal
«Telger», absorb non-organize energetic-informartional fields and structure
its to order in concordance with frequency characteristics. Organize support
these fieds’ normalization in time.
|
11
|
|
0
|
767
|
Tipa Roxana Silvia, Baltag Octavian
|
Perie de dinti
|
The invention fated to dental brush and gum massage using a washing sollution
injected through cilies from the head of the brush. The emulsion (washing sollution)
is stored in a tank darkling in the handle of the brush.
|
11
|
http://www.cttecotech.ro/salon/postere/P767.png
|
0
|
768
|
Tiumeneva E.
|
Pictographic method of one’ states harmonization and social groups’ internal
relations
|
Pictographic method of harmonization open possibility to transform internal
pre-stress’ states and pre-conflict situations in family ore members of group
with common interests (work, study, creativity). Harmonization go through
contemplation and contact with Runic ornament on everyday’ objects, clothing,
other.
|
11
|
|
0
|
769
|
Toderas I., V.Rudic, V.Derjanschi, T.Chiriac, L.Toderas, V.Gudumac, V.Bogdan
|
APISPIR – the new preparation for the stimulation of the bees’ families
growth
|
On the base of APISPIR obtained results the procedure of stimulation of bees’
families and their productivity growth (40-50%) has been invested. There has been
observed that stimulated bees were less
|
9
|
http://www.cttecotech.ro/salon/postere/P769.png
|
0
|
770
|
Toma S., N. Bujoreanu, dr. Gh. Tudorake, E. Kirilova, G. Gomoja
|
Procedeu de cultivare a plantelor pomicole
|
The proposed method includes the treatment of the fruit
plants with the biologically active substance Regalis in concentrations of
0,0125…0,0250% what contributes to the increase of yield on 25-30 q/ha and
the carbohydrates contents on 10-15% in comparison to control
|
9
|
http://www.cttecotech.ro/salon/postere/P770.png
|
0
|
771
|
Toma S., A.Kirilov, G.Tudorache, N.Bujoreanu, S. Veliksar
|
Diagnosticarea, reglarea rezistentei si productivitatii plantelor perene
|
There is proposed a method, which ensures the express
determination of the freeze and drought resistance levels, as well as
nutritional disbalance that permits the optimization of nutritional regime
and phzsiological processes development by applying of exogenous factors –
insufficient trace elements, steroidal glycozides, brassinosteroids,
auxin-like substances, both individually and in combination.
|
9
|
http://www.cttecotech.ro/salon/postere/P771.png
|
0
|
772
|
Topor B. s.a.
|
Transplante morfoinductive in recuperarea defectelor osoase
|
Ciclul de inventii se refera la biotehnologii noi,care prevad utilizarea
preparatelor morfoinductive pentru restabilirea defectelor oaselor plate,
lungi si scurte. Activitatea morfoinductorie a preparatelor propuse asigura
restabilirea tesuturilor deteriorate si regenerarea activa la nivelul
defectelor.
|
11
|
http://www.cttecotech.ro/salon/postere/P772.doc
|
0
|
773
|
Trandafir Viorica, Georgeta Popescu, Mariana Mihăilă, Demetra Nuţă,
Marin Radu, Viorel Buda, Ioan Hărănguş, Cornelia Zaharia, Georgeta
Bumbeneci
|
Compus bioactiv si procedeu de obtinere a acestuia
|
Invenţia se referă la un compus bioactiv din colagen şi extracte
vegetale conţinând principii active din Rosa canina (măceşe)
respectiv Mallus sylvestris (mere pădureţe) şi la procedeul de
preparare al acestuia sub formă de pulberi bioactive, fitoproteice destinate
domeniului cosmetic şi medical.
|
12
|
http://www.cttecotech.ro/salon/postere/P773.ppt
|
0
|
774
|
Tripon Avram
|
Metoda creativa EFI-ROM
|
La méthode EFI-ROM permette d’entamer un probl?me en corrélation
avec les sous conscient de la personne qui l’applique. La méthode EFI-ROM a
deux variante : 1. Variante applicable aux personnes prépondéremment
logiques, conduites par la raison 2. Variante applicable aux personnes
prépondéremment imaginatives
|
20
|
http://www.cttecotech.ro/salon/postere/P774.png
|
0
|
775
|
Tudor Gheorghe, Arsene Sorin, Botoi Alexandru, Tudor Dragostina
|
Linie tehnologica compatibila CAD-CAM, pentru asamblarea si sudarea sectiilor
curbe ale corpurilor navelor
|
Noua linie tehnologica este destinata pentru modernizarea fabricarii
sectiilor curbe cu raze de curbura variabila si dimensiuni diferite, ale corpurilor
navelor, prin formarea suprafetelor curbe si sudarea imbinarilor curbe cu
ajutorul unor sisteme automatizate-conduse si actionate in control
numeric-virtual.
|
3
|
http://www.cttecotech.ro/salon/postere/P775.png
|
0
|
776
|
Tudor Gheorghe, Mocanu Zamfirel, Mocanu Mircea, Enescu Dan, Tudor Dragostina
|
Sistem tehnologic complex, condus numeric virtual, pentru fabricarea tronsoanelor
de tubulatura,din tevi metalice rotunde
|
Noul sistem, condus numeric-virtual, este destinat pentru fabricarea
tronsoanelor de tubulatura metalica din tevi rotunde, cu si fara coturi
dispuse spatial, cu si fara flanse sau inele la capete, necesare
instalatiilor din constructiile navale, constructiile industriale si
constructiile civile, cu o noua tehnologie.
|
3
|
http://www.cttecotech.ro/salon/postere/P776.png
|
0
|
777
|
Ursachi T., Butean V.
|
Substanta dezinfectanta cu activator
|
It is a farmaceuticaly formula who is contain two differently dry substances,
who distruct Bacillus anthracis’s spors, the hepatic B virus and other pathogen
microorganisms for people and animals.
|
11
|
http://www.cttecotech.ro/salon/postere/P777.png
|
0
|
778
|
Usatii Agafia, Chitita Elena, Topala Lilia, Moldoveanu Taisia, Molodoi Elena
|
Technology of production of microbiological oleogenic products for
pharmaceutics, cosmetology, and food industry
|
This is a complex no waste technology for production ofmicrobiological oleogenic
compounds, that is based on new elements – yeast strain with enhanced
productivity, efficient nutritive media, original procedures for extraction
of lipids, procedures for directed cultivation and synthesis – and permits to
obtain from 10 kg of yeast biomass 4.0-4.5 kg of lipids, 5.5-6.0 kg of yeast
biosrot and 500-550 l of cultural liquid enriched with vitamins, carotinoid
pigments, exolipids, lipolytic enzymes, aminoacids and other protein
metabolites. It increases the diversity of biopreparations
|
12
|
http://www.cttecotech.ro/salon/postere/P778.doc
|
0
|
779
|
Vacariu Vintila Teodoru
|
Procedeu de recuperare a elementelor utile continute in bateriile electrice
epuizate
|
The invention refers to a procedure to valorize the useful
elements contained by The used electrical accumulators (type Leclanché dried
elements) are mechanic dismantled and component elements are specific
treated. Zinc is malted and valorized as ingots. The melting cinder and zinc
salts are treated to obtain ZnO2
(zink wiess). The pirollusite is washed and depolarized with a view to
recycling. The iron is delivered to the ferrous metallurgy. Plastic, bitumen
and textile are neutralized.
|
1
|
http://www.cttecotech.ro/salon/postere/P779.png
|
0
|
780
|
Vacariu Vintila Teodoru, David Boris
|
Procedeu de obtinere a monocarbonatului de uranil
|
In order to obtain the uranyl-monocarbonate it is used the
uranium chloro-carbonated elute resulted from the phase of uranium recovery
and concentration from alkaline leach. The elute is neutralized with
hydrochloric acid to a pH = 4.5±5%. Uranyl-monocarbonate owns superior
physical-chemical properties and is a technical concentrate useful for the
nuclear power industry.
|
5
|
http://www.cttecotech.ro/salon/postere/P780.png
|
0
|
781
|
Vacariu Vintila Teodoru, Niederkorn Ioan, Hostuc Petre
|
Procedeu de separare a niobiului din solutii sulfurice complexe
|
In order to separate the niobium from complex sulphuric
solutions the extraction with TBP 100% solution from sulphuric - hydrofluoric
medium is used. The sulphuric solution is treated with concentrated
hydrofluoric acid when the thorium and rare earths fluoride is eliminated.
Niobium is extracted from the sulphuric-hydrofluoric solution with TBP 100%.
The niobium is separated as Nb2O5
concentrate of 99.99% purity grade from the aqueous re-extract. The titanium
is separated from the aqueous refined as a complex salt , namely K2TiF6.
|
5
|
http://www.cttecotech.ro/salon/postere/P781.png
|
0
|
782
|
Vacariu Vintila-Teodoru, Georgescu Petre-Dan, Iuhas Tiberius Flaviu, Vasile
Constantin
|
Procedeu de purificare si recuperare a azotatului de amoniu din ape reziduale
|
The procedure according to the invention eliminates
through the appropriate treatments methods uranium molybdenum and organic
substances contained by the wastewaters. So the uranium is retained on a
strong acid cationite at a pH =3-4; the molybdenum is retained on a strong
basic anionite at a pH=2-3 and the organic substances are retained by the
active carbon after the molybdenum removal. The purified ammonium nitrate
solution is concentrated via vaporization.
|
5
|
http://www.cttecotech.ro/salon/postere/P782.png
|
0
|
783
|
Vacariu Vintila-Teodoru, Matyas Carol, Georgescu Petre-Dan, Vasile
Constantin, Petrescu Stefan
|
Procedeu de recuperare a uraniului continut si tulbureli provenite din
lesierea carbonatica a minereurilor uranifere bogate
|
The procedure according to the invention is combining the
technique of direct precipitation of uranium from solution with the ion
exchange . Uranium pregnant solution resulted from the alkaline attack on the
ore containing more then 0.5% uranium is filtrated. The uranium is
precipitated from the filtrated uranium-bearing solution using the sodium
hydroxide. The solid phase separated by filtration is re-pulped with water
and the uranium content is extracted using the ion exchange with a strong
basic anionit. The sodium diuranate is precipitated from the
chloro-carbonated elute. Both sodium diuranate concentrates are mixed,
filtrated, washed and dried. The final product contains over 60% uranium.
|
5
|
http://www.cttecotech.ro/salon/postere/P783.png
|
0
|
784
|
Vasilache Valeriu, Pahteanu Boris
|
Instalatie energetica neconventionala multisursa
|
Installation providing energy using a propeller in an ascensional flow
located in an hyperboloidal tower. The flow is amplified by hot green house air
effect. In synergic regime with ejection effect applied to the flow. Both,
they put in motion an eolian construction using a double propulsion source.
|
3
|
http://www.cttecotech.ro/salon/postere/P784.ppt
|
0
|
785
|
Vasilache Virgilius, Vasilache Marius
|
Sistem de incalzire pt. unitatile de injectat mase plastice
|
The invention relates to a heating system usable on the
plastics injection moulding machines. The system consists of some heating
resistors following a channel turned on the body of the unit and being
covered by some semicircular reflectors provided with thermal insulators.
|
3
|
http://www.cttecotech.ro/salon/postere/P785.png
|
0
|
786
|
Vasilache Virgilius, Vasilache Marius
|
Dispozitiv de rulare-ghidare pt. platoul mobil si platoul unitatii de
injectie
|
The invention relates to a device for sliding-guiding the
mobile plates of the plstics injection moulding machines. The device consists
of some pairs of inclined wedges for positioning and sliding, attached to the
mobile plate respectively to the frame of the machine and working due to some
steel balls.
|
3
|
http://www.cttecotech.ro/salon/postere/P786.png
|
0
|
787
|
Vasilache Virgilius, Vasilache Marius
|
Dispozitiv de actionare a mecanismului de inchidere la masinile de injectat
mase plastice
|
Inventia se refera la un dispozitiv de actionare a mecanismului de inchidere
utilizabil la masinile orizontale de injectat mase plastice. Dispozitivul
este format dintr-un surub de miscare cu piulita aferenta actionat de un
motor cu rotor-disc. The invention relates to a driving device for the
closing mechanism of the horizontal plastics injection moulding machines. The
device consists of a movement screw with its related nut, being driven by a
motor with disc-rotor.
|
3
|
http://www.cttecotech.ro/salon/postere/P787.png
|
0
|
788
|
Vasilache Virgilius, Vasilache Marius
|
Scula pentru slefuirea canalelor
|
The invention relates to a tool for lapping the channels.
The interior walls of the channels provided on the circumference of drums.
The tool consists from a body provided with some lateral holes through which
an abrasive yarn enters and then the yarn passes through some radial holes
being finally rolled on some channels from the external edges of the body.
|
3
|
http://www.cttecotech.ro/salon/postere/P788.png
|
0
|
789
|
Vasilache Virgilius, Vasilache Marius
|
Manipulator automat
|
The invention relates to an automatic handling device
usable especially for hiking and transporting the preforms from a work
position to another within stretching-blowing machines. The handling device
consists form a mobile platform sliding on some rails. Some hiking devices
are placed on the platform and they consist from some hiking levers provided
with hiking clutches, being driven by a vertical mobile slide which is pushed
by a spring or by a push-rod. The slide is provided with some inclined
channels where some rolls are rolling; the rolls are fitted on the end of
some levers which drive the hiking levers.
|
3
|
http://www.cttecotech.ro/salon/postere/P789.png
|
0
|
790
|
Vasilache Virgilius, Vasilache Marius
|
Mecanism de actionare a platoului mobil sau a unitatii de injectie
|
The invention relates to a driving mechanism for the
mobile plate or for the injection unit of a horizontal plastics injection
moulding machine. The driving is performed by some step-by-step liniar
motors, while blocking is performed by means of a latch which is provided
with a teeth sector; the teeth have a triangular profile and interact with a
teeth sector having the same profile on the frame-plate.
|
3
|
http://www.cttecotech.ro/salon/postere/P790.png
|
0
|
791
|
Vasilache Virgilius, Vasilache Marius
|
Mecanism de actionare a melcului de alimentare
|
The invention relates to a driving mechanism for the
feeding screw of the horizontal plastics injection moulding machines. The rotation
of the screw is driven by a half-clutch provided with internal grooves, while
the translation of the screw is drivenby a group consisting of a halt-clutch
provided with internal thread and a pressing element; a low inertia motor
with high speed drives the whole mechanism.
|
3
|
http://www.cttecotech.ro/salon/postere/P791.png
|
0
|
792
|
Vasilache Virgilius, Vasilache Marius
|
Dispozitiv hidraulic de protectie pentru masinile de injectat mase plastice
|
The invention relates to a safety device used to protect
against the involuntary opening of the sliding doors of the injection
machines, doubling the electrical protection. The device is provided with two
rods equipped with rolls and driven by two cams, the cams being actioned by
the sliding doors. The cams position is adjustable related to some axles
which are pushed each one in a groove of a ball; a hole punching through the ball
connects or disconnects the hydraulic circuit of the machine.
|
3
|
http://www.cttecotech.ro/salon/postere/P792.png
|
0
|
793
|
Vasilache Virgilius, Vasilache Marius
|
Racitor de ulei pentru masinile de injectat mase plastice
|
The invention relates to a spiral type cooler which is
sank in the oil tank, the cooler having the possibility to be easily and
completely purged. The cooler consists of several concentric coiled tubular
spirals transporting the cooling agent; the spirals are sank in the oil tank.
The inferior connections between the spirals are all connected to a tap which
is placed outside of the oil tank and is connected to the outlet of the
cooler.
|
3
|
http://www.cttecotech.ro/salon/postere/P793.png
|
0
|
794
|
Vasilache Virgilius, Vasilache Marius
|
Masina de injectat mase plastice
|
The invention relates to an all-electric injection machine
for plastics. Some levers press upon a fix and a mobile plate, a small force
being required for opening because the injection unit is not constrained to
the mobile plate. Closing the mobile plate is performed by a linear
step-by-step motor driving a locking hydraulic cylinder which behaves like a
rigid because its rod is completely retained; a spring is compressed only
after the mobile plate has no more moving possibilities and pressure is
produced in the locking cylinder by a rod which is actioned by the same
linear motor. The locking force is applied after some levers immobilize the
plate by means of some rods. Things happen in the same way for the plate of
the injection unit.
|
3
|
http://www.cttecotech.ro/salon/postere/P794.png
|
0
|
795
|
Vasilache Virgilius, Vasilache Marius
|
Moara pentru deseuri de mase plastice
|
The invention relates to a mill for plastics wastes, even
for PET bottles. The mill consists of a star shape rotor which is inclined to
the horizontal and which is provided with some knives on the flanks and with
a breaker on the frontal face. The geometry of the rotor and of the knives
make it possible even the PET bottles to be grinded. A water cooling is
provided for the bearing of the main axle. A motor with adjustable position
drives the rotor by means of a belt transmission.
|
3
|
http://www.cttecotech.ro/salon/postere/P795.png
|
0
|
796
|
Vasilache Virgilius, Vasilache Marius
|
Torpila pentru dozat-injectat
|
The invention relates to a torpedo for dozing-injection,
uzable on horizontable plastic injection moulding machines. The torpedo
consists from a body which is provided with 4 holes distributed at 90o around the body
circumference, the axles of the holes being inclined related to the body axle
and communicating all of them in a larger axial hole which carries a sphere
which is retained due to a pin.
|
3
|
http://www.cttecotech.ro/salon/postere/P796.png
|
0
|
797
|
Vasile C., Georgescu P.D., Popa N., Nica L., Mardare F., Filip Gh., Radu M
|
Procedeu de procesare a minereurilor uranifere
|
The invention presents an uranium ores processing procedure
using the alkaline treatment. The exhausted effluent, resulted from uranium
recovery on ion exchange resin stage, which contains 40-50% solid, is
separated using a settlement operation, resulting a clarified solution, which
contains minimum 3 kg Na2CO3
/m3 and is recycled into the process. The Na2CO3 solution recycling in process is
causing sodium carbonate consumption decreasing.. The invention is
industrially applied
|
5
|
http://www.cttecotech.ro/salon/postere/P797.png
|
0
|
798
|
Vasile C., Georgescu P.D., Popa N., Nica L., Petrescu S., Filip Gh., Radu M.
|
Procedeu de purificare a uraniului prin extractie cu solutie de
tri-n-butilfosfat
|
It is presented a purification process for uranium
contained in impure uranyl nitrate aqueous solutions – AUI UO2(NO3)2 through
solvent extraction with TBP in kerosene. The procedure according to the
invention consists of AUI solution conditioning, uranium extraction from the
aqueous phase into the organic one, washing of the pregnant organic solvent
with pure uranyl nitric solution (AUP), uranium re-extraction in the aqueous
phase and the exhausted solvent regeneration in two stages: through its
subsequently treatment with an aqueous solution of 10% Na2CO3 and aqueous
solution of O.5 N HNO3.
The AUP solution, which was unpurified due to the uranium pregnant organic
solvent washing, is re-introduced into the uranium purification circuit
starting with AUI conditoning stage.
|
5
|
http://www.cttecotech.ro/salon/postere/P798.png
|
0
|
799
|
Vasylchenko N.
|
Method of Using New Runes for Diagnosis and Correction of Psychic Processes
|
Using of Runic Symbols for diagnosis open possibility to fix such manifestation
of psychic, what impossible to study with using of traditional methods of
diagnosis. Diagnosis consist in integration Causal approach, Runic texts in
concordance with approaches of geshtalt-therapy, fairy-therapy
|
11
|
|
0
|
800
|
Verdes Nicolae, Sandu Ion, Mangalagiu Ionel
|
Procedeu de dezinfectare a silozurilor in stare incarcata sau dupa golire
|
Inventia se refera la un procedeu de dezinfectare a silozurilor pentru furaje,
tutun, seminte, cereale, fructe, legume, in stare incarcata sau dupa golire.
|
9
|
http://www.cttecotech.ro/salon/postere/P800.png
|
0
|
801
|
Vernescu Mihail, Marioara Godeanu, Serban Stainovici
|
Decantor pentru epurarea apelor reziduale
|
Inventia se refera la descrierea unui decantor pentru epurarea apelor
reziduale
|
1
|
http://www.cttecotech.ro/salon/postere/P801.png
|
0
|
802
|
Vernescu Mihail, Marioara Godeanu, Serban Stoianovici
|
Instalatie pentru epurarea apelor reziduale
|
Se descrie instalatia pentru epurarea apelor reziduale
|
1
|
http://www.cttecotech.ro/salon/postere/P802.png
|
0
|
803
|
Vincze Gyorgy
|
Sursa electrica pentru telefonie mobila
|
Inventia se refera la o sursa electrica pentru telefoane mobile utilizata în
locuri izolate si pentru situatii speciale
|
13
|
http://www.cttecotech.ro/salon/postere/P803.png
|
0
|
804
|
Vizitiu Alexandru
|
Sistem de irigatii
|
The system is based on a lot of microeolian stations with Savonius profile
which through a transmission chain collect the water from some fountains, the
water being then falled into some tanks which open some taps situated at same
distance with culture rows.
|
1
|
http://www.cttecotech.ro/salon/postere/P804.png
|
0
|
805
|
Vizitiu Alexandru
|
Pompa manuala
|
Manual pump intended for extraction of the fluids, provided with four vents
wich works in cross, one of left face with one of right back, and one of left
back with one of right face, in relationship with action of a handle,
turn-return, all the time the existing fluid at penting linkage.
|
3
|
http://www.cttecotech.ro/salon/postere/P805.png
|
0
|
806
|
Vizitiu Alexandru
|
Dispozitiv de prindere si rotire
|
Device for catching and whirling of cylinder with mass by two tons, specialy
for loading, unloading and stovage operations this ciliynders in and from
merchandiser trucks. The contrivance acts some jaws for catching trough a
hydraulic mechanism.
|
3
|
http://www.cttecotech.ro/salon/postere/P806.png
|
0
|
807
|
Vizitiu Alexandru
|
Dispozitiv modulat pentru incarcare si transport
|
Module device for loading and transport, integrated from lateral ears for
catching the ensemble at installation used for loading, solidarly with a
elevation beam on wich there are attached some plates for catching, provided
with bolts (5) for catching the body of contrivance provided with teh bolts
(7) where are instalated hydraulic cylinders acted by a hydraulic panel
trough some articulations (10) which acts taking arms where there are fixed
the loading bowls.
|
3
|
http://www.cttecotech.ro/salon/postere/P807.png
|
0
|
808
|
Vizitiu Alexandru
|
Metoda de profilare elicoidala
|
Helical shaping method Abstract: The vertical displacement of a lather kife (1)
concurrent with his horizontal displacement, beyond a CNC programme dependent
of the shape of a rotor (2) which rotates solidarly with the horizontal dish
(3), resulting an helical shaping which repeats similar at a thread with many
firsts.
|
3
|
http://www.cttecotech.ro/salon/postere/P808.png
|
0
|
809
|
Voicu V.
|
Aplicarea filtrului cu doua trepte de filtrare la o camera de sablare
|
Powder collecting with descending air current and their
keeping in two stage filters enclosed in a common device. The first stage
provides the coarse powder keeping and the second stage keeps the fine
powders (microns and less).
|
6
|
http://www.cttecotech.ro/salon/postere/P809.ppt
|
0
|
810
|
Voicu V. si al.
|
Instalatie pentru captarea si retinerea noxelor de la cuptoare electrice
|
Instalatie pentru captarea si retinerea noxelor de la cuptoare electrice
pentru elaborarea otelului in scopul protectiei mediului si al imbolnavirilor
profesionale.
|
1
|
http://www.cttecotech.ro/salon/postere/P810.png
|
0
|
811
|
Voicu V. si al.
|
Dispozitiv reglabil pentru captarea noxelor
|
The adjustable device has five freedom points and is
designated to local collection of the contaminants exhausted from the
metallic and non-metallic pieces working on the machine-tools. The freedom
points permit the contaminants aspiration hole to be directed in different
work positions, according to technological process, in order to capture all
contaminants and avoiding the environmental pollution.
|
1
|
http://www.cttecotech.ro/salon/postere/P811.png
|
0
|
812
|
Voicu V. si al.
|
Epurator umed cu sicane, pentru aer
|
This invention refers to a device for wet purification of
the air. It is designated to technological or hygienic – sanitary facilities
in order to retain agglomerable dust, as those containing fibres, which are
retained with a high efficiency. The efficiency of the wet purifier is due to
the adjustable baffle system that performs the moistening and retention of
the finest dust.
|
1
|
http://www.cttecotech.ro/salon/postere/P812.png
|
0
|
813
|
Voicu V. si al.
|
Filtru cu autocuratire centrifugal
|
The invention deals with a local collecting and retaining
system mineral oil for cooling or other technological purposes.Thesystem is
made up of a self cleaning filter with plate cyclone, a fine wire net case
filled with glass fibres and felt, and an electric engine entraining the
filter self cleaning mechanism when loaded.
|
1
|
http://www.cttecotech.ro/salon/postere/P813.png
|
0
|
814
|
Voicu V. si al.
|
Instalatie de ventilare pentru statiile de sablare
|
The invention deals with a ventilation plant for the
abrasive cleaning stations in order toprotect the environment and provide
work safety. The plant is provided with a containment chamb er where cleaning
of the pieces cast by compressed air jet with metallic shots is carried out.
The plant is provided with two suction dust down upwards slots, a frontal
filter for filtering the air that comes in through an upside down punctured
ceiling, a suction dust device out of the chamber bin, a cyclone battery of
automatic discharge for dust collection, a ventilator and a filtrated air
exhaust chimney.
|
1
|
http://www.cttecotech.ro/salon/postere/P814.png
|
0
|
815
|
Voicu V. s.a.
|
Instalatie mobila pentru captarea si retinerea noxelor in spatii inchise
|
The invention deals with a mobile or fixed plant for
collecting and retaining contaminants from the electric welding operation in
confined spaces. The plant is provided with a contaminant suction devicefixed
on a flexible hose, an air distributor, an internal pressing ventilator
connected to a contaminant retaining filter mounted on a wheel metallic
framework. The ventilator of special construction can provide all contaminant
collection and retaining at about 6 working stations.
|
1
|
http://www.cttecotech.ro/salon/postere/P815.png
|
0
|
816
|
Voicu V. s.a.
|
Instalatie pentru captarea noxelor la sudarea electrica in CO2 si jet de
plasma
|
Adjustable device allowing contaminant collection in any
cutting position and electric weld in CO2 and plasma jet on which an
adjustable welding guard provided with a fastening device is set.
|
1
|
http://www.cttecotech.ro/salon/postere/P816.png
|
0
|
817
|
Voicu V. s.a.
|
Instalatie pentru captarea locala si retinerea aerosolilor de plumb si a
vaporilor de acid clorhidric la fabricarea radiatoarelor pentru autovehicule
|
The equipment provides the collection of two contaminants
(vapors of chlorine hydride and lead aerosols) and their retention in a two
step filtering system included in the same unit. The first stepcollects the
vapors of chlorine hydride and the second step collects the lead aerosols.
|
1
|
http://www.cttecotech.ro/salon/postere/P817.png
|
0
|
818
|
Voicu Victor, Ciobanu Marin
|
Servo-valve miniaturisée
|
Structure électrohydraulique avec performances supérieures destinée ŕ régler les facteur de puvoir
hydraulique (débit, pression) dans les systčmes hydrauliques automatiques.
|
3
|
|
0
|
819
|
Voinescu T., Nicola G.
|
Procedeu pentru obtinerea unor poliesterimide flexibilizate pentru lacuri de
emailare
|
Procedeu pentru obtinerea unor poliesterimida flexibilizata pentru lacuri de
emailare prin solubilizarea poliesterimidei in amestec adecvat de solventi.
|
6
|
http://www.cttecotech.ro/salon/postere/P819.png
|
0
|
820
|
Vrajitoru Dan
|
Aparat pentru facilitarea învatarii
|
Aparatul este destinat practicarii unui joc logic, inspirat din jocul de sah,
obtinând prin aceasta ameliorarea conditiilor în care se începe, la copiii prescolari
si din primele clase primare, învatarea matematicii, a gândirii logice, a
unor deprinderi practice utile si a deprinderii cu competitia intelectuala.
|
17
|
http://www.cttecotech.ro/salon/postere/P820.doc
|
0
|
821
|
Weiss Wilhelm, Stanila Alexandru, Alecu Ioan, Sandu Ion
|
Procedeu de obtinere a unor betoane celulare
|
Inventia se refera la un procedeu de obtinere a betoanelor celulare, prin
expandare in situ, intarire si tratare termica pana la 60°C timp de 4 h, a
unui amestec de materii prime cu continut preponderent de cenusa de
termocentrala, turnat in tipare corespunzatoare, si decofrarea finala a
produselor intarite, astfel obtinute.
|
4
|
|
0
|
822
|
Weiss Wilhelm, Alecu Ioan, Stanila Alexandru, Sandu Ion
|
Procedeu de obtinere a betoanelor celulare
|
Procedeu in mai multe faze de obtinere a betoanelor celulare, implicand
malaxarea unui amestec de apa si cenusa de termocentrala sau silice
ultrafina, adaugarea de aditivi, deversarea in tipare adecvate si
maturarea-reticularea, cu expandare in situ si apoi uscare.
|
4
|
|
0
|
823
|
Decker Emanuela
|
Procedeu de consolidare a elementelor din beton armat si/sau precomprimat
|
Le procédé de consolidation réside en l’application d’une couche de mastic
polymčrique pour réparer la
surface de béton et la hybridation de section d’élément par la consolidation
avec des couches des fibres techniques.
|
4
|
http://www.cttecotech.ro/salon/postere/P823.png
|
0
|
824
|
Decker Emanuela
|
Procedeu de reparare si consolidare a barelor din lemn cu un grad maxim de
deteriorare
|
Pour le redressement de la forme géométriquee des barres du bois détériorées,
celles-lŕ se lutent par
imprégnation avec des résines synthétiques et s’introduissent des pieces
spéciales d’un matériau composite qui forme une éclisse spatiale.
|
4
|
http://www.cttecotech.ro/salon/postere/P824.png
|
0
|
825
|
Decker Emanuela
|
Element structural hibrid pentru acoperisuri
|
Un élément structurel hybride, en forme de cadre avec trois articulations et
section transversale double T, ayant comprimé en bois, la semelle etendus par
profil Ω de PAS
(polyester ranforceavec des fibres de verres) et le coeur – plaque onduleé de
PAS, assambleés par agglutination avec résine thermodurcissable aux
temperatures de 10-30°C.
|
4
|
http://www.cttecotech.ro/salon/postere/P825.png
|
0
|
826
|
Diaconu I., Ioanid E. G.
|
Aparat pentru determinarea gradului de antistatizare a maselor plastice
|
For obtaining the Corona effect and triboelectric charging
on a plastic foil, on the assay disc is mounted an adjustable friction piece
and a device for making the Corona effect; the gather and transmission of
data is realized by a device formed by a metallic disc, coaxial with the
support disc axle, which can move vertically on a cog rack.
|
2
|
http://www.cttecotech.ro/salon/postere/P826.ppt
|
0
|
827
|
Ioanid A., Ioanid E. G.
|
Procedeu de copiere
|
In the first phase a copy is realized on a small lucent
support, positioned afterwards toward the support for the copy executing a series
of markings; with the help of a copier machine with photoconductive plate a
1:1 copy is realized on translucent foil, the negative image being afterwards
transferred on the reference document by over posing followed by passing of a
corotron device.
|
16
|
http://www.cttecotech.ro/salon/postere/P827.ppt
|
0
|
828
|
Ioanid E. G., Rusu E., Avram E.
|
Dispozitiv pentru determinarea gradului de umflare a polimerilor reticulati
|
The device is formed by a cylindrical recipient sealed
with a thermostatically capote, filled with a solvent where is partially
submersed a floating corpus; a sealed room with weights, a drilled cylinder
through where the solvent reaches the plymeric assay inside the cylinder.
Therefore with the help of counter-balance the assay is brought in
superficially contact with the solvent or totally submersed.
|
6
|
http://www.cttecotech.ro/salon/postere/P828.ppt
|
0
|
829
|
Ioanid E. G., Besliu T., Popescu M.
|
Aparat de xerografiere
|
The device has a toner distribution device and an
illumination building block. The dosage device is rotating around his own axis.
To improve the safety in work, a cog which join a pressure plate is fitted;
the plate can move axially and give the needed motion to the photographic
room.
|
16
|
http://www.cttecotech.ro/salon/postere/P829.ppt
|
0
|
830
|
Ioanid E. G., Besliu T.
|
Dispozitiv pentru copierea microfilmelor
|
The device has a draw bar with circular marks to indicate
the copy format, backed on a mainspring inside a case; the visualization and alignement
of the photogram is made on a translucent screen, with a tilting mirror being
operated by an electromagnet.
|
17
|
http://www.cttecotech.ro/salon/postere/P830.ppt
|
0
|
831
|
Ioanid E. G., Toia M.
|
Aparat de xerografiere
|
The apparatus has a positioning device formed by a plate
with lugs and oblong holes, with a guiding device formed by a plate which
assure an unique position of the copy towards a photoconductive plate,
precise positioned by an indenture where a dropper is fitting.
|
16
|
http://www.cttecotech.ro/salon/postere/P831.ppt
|
0
|
832
|
Ioanid E. G., Neamtu I.
|
Metoda si dispozitiv pentru masurarea suprafetelor
|
The device is formed by a thermo isolating recipient
filled with distillated water, where the studied corpus is submersed; a temperature
homogenizer drives the corpus through a high-frequency electromagnetic field,
created by a spiral around the recipient, with the possibility of alternative
lening of the recipient towards the horizontal position.
|
2
|
http://www.cttecotech.ro/salon/postere/P832.ppt
|
0
|
833
|
Ioanid E. G., Avram E., Luca C.
|
Aparat pentru determinarea unor caracteristici fizico-mecanice ale
materialelor dentare
|
The apparatus allows the assay at 37°C to be brought in
contact with a mandrel before each test with the help of a plate, a pressing
buffer a an electromagnet; the mobile core of the electromagnet is
mechanically joined with the mandrel so at the electromagnet disconnection, a
weight press the mandrel onto the assay on a depth representing the hardening
degree.
|
11
|
http://www.cttecotech.ro/salon/postere/P833.ppt
|
0
|
834
|
Ioanid E. G., Popa M.
|
Dispozitiv pentru umflarea pneurilor
|
The device is formed by a metallic body with a
depressurized room where is unloaded the gaze contained by a capsule, pushed
onto the cotter. The gaze is evacuated through a tubular linkage filled up
with metallic wool. In this way the pressure and temperature shock is
attenuated.
|
15
|
http://www.cttecotech.ro/salon/postere/P834.ppt
|
0
|
835
|
Ioanid E. G., Balau M. T.
|
Instalatie pentru expandarea peliculelor si straturilor polimere
|
The installation is formed by a heating post with high
frequency currents realized as a condenser with two metallic capacitor
coatings, one fixed and one mobile, from stainless steel, connected to a high
frequency generator; in this way an optimal intensity for the field in the
worked material is assured.
|
6
|
http://www.cttecotech.ro/salon/postere/P835.ppt
|
0
|
836
|
Ioanid E. G.
|
Dispozitiv electromecanic pentru semnalizarea regimului de curgere a unui
fluid
|
The device is formed by a glass cylinder which has inside two
metallic clacks and on exterior a permanent magnet and a cylindrical textolit
piece, in a copper case which allows the axial translation of the magnet; the
rotation angle of the clacks is determined only by the equilibrium between
magnet’s force and fluid’s pressure force, and that allows a perception of
10-15% variation of the fluid’s pressure.
|
2
|
http://www.cttecotech.ro/salon/postere/P836.ppt
|
0
|
837
|
Ioanid E. G., Ioanid A.
|
Aparat pentru studierea imaginilor elecrono-microscopice
|
The apparatus is formed by a mechanical assembly with a
fixing-sealing piece through which the apparatus is fixing onto a wall of the
examining room and allows the displacement parallel with the screen of a
metallic check point connected to a polarization assembly for a potential
difference between the metallic check point and the screen; in this way the
image of the assay will be framed.
|
2
|
http://www.cttecotech.ro/salon/postere/P837.ppt
|
0
|
838
|
Ioanid E. G., Ruscior R., Pomarleanu V.
|
Aparat pentru prospectiuni decrepitofonice
|
The apparatus use a thermo acoustical probe made from a
case with cooling profiles, mounted onto a sound-absorbent chock, on the
upper side is an alcohol burner where is the assay’s chest, with a steel bar
backed on a piezoelectric transducer which transforms the sonorous signal
into an electrical signal.
|
2
|
http://www.cttecotech.ro/salon/postere/P838.ppt
|
0
|
839
|
Ioanid E. G., Balau M. T., Ioanid A.
|
Aparat pentru ozonizare
|
The apparatus is made from a glass cylinder who has inside
a corotron made from three cantal wires, sited radial at 120° between them,
around a steel bar, the bar and the wires being connected at a three-phase
source; the Corona discharge is having place between the wires and also
between wires and the bar; the stability and homogeneity is realized by a
mobile grid placed on the exterior of the cylinder.
|
11
|
http://www.cttecotech.ro/salon/postere/P839.ppt
|
0
|
840
|
Ioanid E. G., Ioanid A.
|
Aparat pentru determinare volumelor corpurilor solide
|
The apparatus is formed by a calibrated capsule filled with
at 2/3 with a fluid where the measured object is drowned; a micrometric
mechanism with a needle is posed on the micrometric bolt so this will reach
the fluid’s surface forming thereby a convex meniscus, relieved with a light
source and a loupe.
|
2
|
http://www.cttecotech.ro/salon/postere/P840.ppt
|
0
|
841
|
Ioanid E. G.
|
Instalatie de acoperire a fibrelor textile cu un polimer
|
The installation is made from a recipient where the
polymer is melted, an electro-mechanical calibration system and a control and
supply system, connected so that a textile wire, passing through the melting
recipient will be covered by a polymer pellicle 1,1-0,15 mm thin; the
thickness of the pellicle is determined by an electro magnetic calibrating
device, which covers a passing aperture.
|
8
|
http://www.cttecotech.ro/salon/postere/P841.ppt
|
0
|
842
|
Ioanid E. G.
|
Aparat de xerografiere
|
The exposal for photoduplicating is made during the
movement of the photoconductive plate in the photograph-development room, the
plate and the rotating port-document are moving with equal speed, the images
to be copied are transcripted by a camera lens on the photoconductive plate
through an adjustable aperture on the photograph-development room.
|
16
|
http://www.cttecotech.ro/salon/postere/P842.ppt
|
0
|
843
|
Ioanid E. G., Ioanid A.
|
Instalatie pentru depunerea seleniului pe tamburi xerografici
|
The selenium settlement is made from a short distance from
the surface to be covered by using a small cylindrical evaporator consisting
in an electric oven and a caster driven in a translating movement by a screw
united with a transmission wheel which gives a rotating movement to the reel
correlated with the evaporator through a gearing placed inside the
evaporating case.
|
16
|
http://www.cttecotech.ro/salon/postere/P843.ppt
|
0
|
844
|
Ioanid E. G., Simionescu B.
|
Aparat pentru determinarea curbelor termomecanice ale polimerilor
|
On a support are mounted cog racks, the upper one can
inveigle vertically a cylindrical crutch on which is mounted a comparator on
who’s bar are attached a mandrel and a turntable; the inferior cog rack
drives a piece for submersing an assay into a fluid; the values of the
assay’s deformation as a result of the mandrel piercing are read by a
comparator, the agitator getting through the piece and the support.
|
6
|
http://www.cttecotech.ro/salon/postere/P844.ppt
|
0
|
845
|
Ioanid E. G., Simionescu B.
|
Generator de inalta frecventa cu tensiunea si frecventa stabilizate
|
The generator is formed by two high-power and high
frequency oscillators, electrostatic shielded between them and can be used
independently or connected so one of the oscillators to be used a pilot
oscillator for the second one, which is used as high frequency amplifier, for
frequency stability assurance, from two adjustable condensers.
|
2
|
http://www.cttecotech.ro/salon/postere/P845.ppt
|
0
|
846
|
Telisca M.
|
Pluviometru sonor
|
The use of sound produced on the impact of water with the
reception surface to determine the rain intensity by placing microphones on
the lower side of the reception surface, on a resonator.
|
1
|
http://www.cttecotech.ro/salon/postere/P846.ppt
|
0
|
847
|
Vidrascu T.
|
Dispozitiv electronic de aprindere electrica de tip capacitiv pentru
motoarele cu ardere interna
|
The electronic device of capacitive type used on
combustion engines assures a constant energy of the electric spark
independently of the accumulator's voltage (1,5-14 volts). This energy can be
adjusted according to temperature and humidity of the environment.
|
3
|
http://www.cttecotech.ro/salon/postere/P847.ppt
|
0
|
848
|
Vidrascu T.
|
Metoda si dispozitiv electronic de aprindere, de tip capacitiv, pentru motoarele
cu turatii foarte mari
|
The invention presents an electronic capacitive device to
be used on combustion engines with very high revolution speed (1000
sparks/sec – 30000 rpm). On all the revolution scale the energy of the spark
is the same, allowing a proper usage of the cold engine, a complete burn of
the fuel and a reduction of the polluting degree.
|
3
|
http://www.cttecotech.ro/salon/postere/P848.ppt
|
0
|
849
|
Vidrascu T.
|
Dispozitiv electronic de aprindere de tip inductiv pentru motoarele Otto
|
The invention presents an electronic inductive device for
ignition with an inductive bobbin, different from the classical one, which
maintains a voltage of 25 000 volts an the central rod of spark-plug until
300 sparks/sec (9000 rpm). In this way a proper start of the engine is
realized down to -25°C.
|
3
|
http://www.cttecotech.ro/salon/postere/P849.ppt
|
0
|
850
|
D. Simion, I. Mitrană, V. Trandafir, M. Radu, E. Sandu, F. Radu
|
Utilizarea extractelor vegetale prelucrate în câmpuri de radiaţii gama
şi ultrasunete la obţinerea de bioprodus
|
Lucrarea pune în evidenţă, în premieră, posibilitatea utilizării unor
metode moderne combinate: introducerea în câmp de ultrasunete şi apoi în
unul de radiaţii pentru separarea unor principiilor active din extracte
vegetale. Se poate utiliza cu succes această combinaţie de metode pentru
extractele analizate (fapt observat experimental prin analiză
spectrofotometrică în cazul vitaminelor), având aplicaţii în domeniul
cosmetic şi medical, prin înglobarea lor în diverse preparate.
|
6
|
http://www.cttecotech.ro/salon/postere/P850.doc
|
0
|
851
|
Radu Stefan, Delca Ion
|
Collecting loader trice-rotation
|
Inventia are drept scop optimizarea operatiei de colectare a recoltei de la masini
pentru evitarea risipei de boabe si a reincarcarilor inutile.
|
3
|
http://www.cttecotech.ro/salon/postere/P851.ppt
|
0
|
852
|
Lupu Vasile
|
Independent device for aquatic massage and aerosols
Dispositif independent de hydromassage et aerosols
|
The invention is about an device used for aquatic massage
and parfumed aerosols , attached to an common bathtub or to other similar recipient.
Is useful for treatment or relaxing bath. The invention is making in the same
time the aquatic massage and the parfumed with aerosols, by an independent
device.
Il s’agit d’un dispositif pour hydromassage et aerosols
aromatiques pose dans d’autres recipients similaires utilises pour la
therapie ou la relaxation.
|
11
|
|
1
|
853
|
Lupu Vasile
|
Device for perfumed and ozoning of the air. Made for
stomatological unit.
Dispositif pour embaumer l’air adaptable sur l’unite dentaire
|
The invention is an device wich can be modulated on any
stomatological unit. In this way the comfort of the medic and patient in
incresing.
Il est constitue d’un tube d’admission qui est connecte d’un part au
compresseur de l’unit dentaire, d’autre part a une tige(barre) qui est
embaume l’air.
|
11
|
|
1
|
854
|
Lupu Vasile
|
Shower with massaging by vibration and self shampooning
Douche a vibromassage et autoshampooing
|
The shower has in composition an rotary brush operated by water pressure. In
this way, durring the shower, you may have an pleasant massage with the
rotary brush and an abundant and continous saopy.
La douche contient une brosse rotative activee par la pression de l’eau et un
reservoir a gel de douche. On beneficie de la sorte d’un massage agreable et
stimulant et d’un savonnage abondant et continue.
|
10
|
|
1
|
855
|
Lupu Vasile
|
Recipient for completing the joining
Recipient pour le finissage des joints de maconnerie
|
The recipient is useful for completing the joining among
faience and gritstone plates, ensuring an high efficiency and upper quality.
On peut utiliser le recipient surtout pour le finissage des joints des grés
céramés et des plaquues de faience. L’utilisation du recipient mene au
perfectionnement de, l’eficience et de la qualite du et du rendement du
travail finissage.
|
4
|
|
55
|
856
|
Lupu Vasile
|
Waggon with a band for roll
|
The invention is about an waggon with a band for roll. Is
useful to cross over some trenches, as for climbing or descenting of
stairways.
|
15
|
|
10
|
857
|
Colpos Bogdan Paul
|
Device for cleaning the black board
Dispositif de mettoyage pour le tableau noir.
|
The invention reffers to a device for cleaning the
blackboard , consisting of two hoists fixed on the blackboard’s edges
supporting three stems – two reprezenst sponge holders (wet.dry ) and one
with displacement handle (from right to left ) for the whole device. The
advantage of this device is that cleaning the blackboard is integral made by
only one move and the cleaning quality is superior . It is hygienic and
ecological.
L’invention se rapporte a un dispositif de mettoyage pour le tableau noir qui
est constitue par 2 (deux) poulies a garge qui dovient etre fixer sur le
bornes (marges ) du tableau noir et elle soutiennent 3 (trois) tiges: 2
(deux) represent de support pour l’eponge (mouille-seche) et l’un avec une
anche de manoeuvre (droit-gouche) pour le dispositif complet . Le dispositif
present l’avantage que l’effacement du tableau noir peut etre integralement
realise d’un mouvement exclusif (en un tour de main) et l’efficience est
superieure d’un facon voyante.
|
17
|
|
11
|
858
|
Colpos Bogdan Paul
|
Casing for school chalk
Etui pour le craie scolaire
|
The invention refers to a casing for the school chalk used
for protecting the chalk and the hands of the users .
L’invention se refere a une etui pour la craie scolaire utilisé pour protegér
la craire et le main de l’utilisant
|
17
|
|
70
|
859
|
Colpos Bogdan Paul
|
Pisoar (men toillet) upward positioning device
Dispositif pour l’orientation en plan vertical d’une piece d’eau (un
Bassinet) au toilette
|
The invention refers to a device for the height adjustment
upwards of pisoar position.Usually, the pisoar is positioned considering a medium
height of the potential user.This construction does not allow the height
adjustment upwards of the pisoar position.The invention has the advantage of
upward positioning the pisoar at different height level depending upon the
user height.
L’invention se rapporte a un dispositif de reglage en plan vertical pour
l’haussement de la position de cette piece d’eau (d’un basinet )dans une
toilette. On voit bien des toilettes ou ces bassinets sont ranges a une
hauteur moyenne pour les utilisateurs.Ces constructions ne peuvent pas
permettre le reglage de la position de cette piece , en plan
vertical.L’invention a l’avantage qu’on peut placer ces pieces d’eau (ces
bassinets) en plan vertical,de degre en degre ,en fonction de la stature de
l’utilisateur.
|
10
|
|
1
|
860
|
Marin Radu, Constantin Cristoi, Christian Poulalion, Mircea Dinescu, Florica
Radu, Marius Arghirescu, Dan Badea, Constantin Minciu, Gheorghe Mocuţa,
Bujor Gabriel Albu
|
Sistem informatic şi metodă pentru transfer tehnologic şi ştiinţific
|
Inventia se refera la un sistem informatic si la o metoda
pentru transfer tehnologic si stiintific, utilizabila de catre birourile
specializate in probleme de transfer tehnologic si stiintific ale unor firme
sau institutii de profil tehnico-stiintific sau de catre alti expozanti de
creatie stiintifico-tehnica.
|
2
|
http://www.cttecotech.ro/salon/postere/P860.ppt
|
0
|
861
|
Goch V., Goncharenko M., Gudim O., Ignatenko I.
|
Device for improvenment of health of the person
"aromoeisal-pendant"
|
The device for improvement of health of the person, containing a capsule from
white porcelain clay, the element of an improving orientation established in
its cavity, and the device for accommodation on a body of the person. On
internal surfaces of a capsule are imprinted pictographic resonators - New
Runes, and on external surfaces of the pendant executed an aperture for
submission of an aromatic improving composition in the connected condition,
for example, oils of a pine or a sage. It is shown, that applications of the
device leads to increase of activity of an organism at a cellular level, and
also functional reserves of cardiovascular system, work capacity, and the
most significant influence of the aromaeisal-pendants has appeared on
functional condition of CNS. Patent of Ukraine.
|
11
|
|
0
|
862
|
Goch V., Goncharenko M., Skomorovskyi Yu., Kamnieva T., Sergienko A.
|
Method of harmonization of psychological condition of an organism of the
person
|
For harmonization of physiological condition of an organism of the person
with a pathology of sight by a reconstruction on visual the center of a brain
from the external carrier the image directed on improvement of health of a
phrase in language of New runes – pictographic resonators, the person
preliminary acquaint with the maintenance, a tactile kind and sounding runes
phrases then spend tactile readings and pronouncings of a phrase and recreate
its image through channels of tactile and sound perception. After work with
runes power reserves increase and the condition of an organism is harmonized,
positive dynamics at a cellular level is observed, stability of functional activity
of cardio-respiratory system and its power inputs raises, the condition of
internal rest is formed. Patent of Ukraine.
|
11
|
|
99
|
863
|
xxx
|
Association of Producers of Herontological Valuable Products of Ukraine
|
Association aim – realization new trademark
“Herontological Valuable Product”. This is method of qualitative valuation of
herontological valuable resolution in producing, services and next growth of
quality existing products or services to level of herontological valuable…
|
20
|
|
0
|
864
|
xxx
|
Lviv Centre for Scientific, Technical and Economic Information
|
The Lviv Center for Scientific Technical and Economic Information is a
leading state scientific-information structure of Western Ukraine. The
activity of LvCSTEI is directed, first of all, towards studying and
satisfying the needs of enterprises and organizations of different possession
forms, and also individual persons, towards researching the problems and
forming approaches to organization of the activity of regional information
centers at state of economic and political reforms in Ukraine.
|
20
|
|
0
|
865
|
xxx
|
Ukrainian Institute of Scientific-Technical and Economical Information
|
UkrISTEI is a National informational centre, which provides the cooperation
of Ukraine in international exchange of scientific-technical information,
provides the development, running and organization of using the informational
funds, bases, databases from different types of scientific-technical
information and results of scientific-technical activity etc. UkrISTEI
proposes to seize the opportunity in: informational services results of
searching in different databases by request information as to news about
legislation in science, technics, economics, etc information about the most
important establishments in the sphere of scientific-technical and economical
activity scientific and informational publishing publishing and polygraphic
services services in organizing and carrying out scientific-technical and
other arrangements possibility in taking part in conferences, seminars and
exhibitions which are carried out by UkrISTEI. To find out about our services
more specifically you can visit our web-site! Addressing to us will let you
can: get information about modern science, technics, economics etc find
national and foreign partners and rivals raise competitiveness of your
product create informational and advertising product of your company.
|
20
|
|
0
|
866
|
Pryazovskyi State Technical University
|
Bell-type blast furnace charging device
|
Bell-type blast furnace charging device is similar to bell-less type in technological
parameters, however, 10 – 12 times more cost-effective in terms of capital
investments and operation cost. In addition, application of this device
produces at least UAH4 million annual profit due reduced specific consumption
of coke by 15 – 25 kg/t hm (data from Zaporozhstal Iron and Steel Works).
Such coke saving can be attributed to a specific structural feature –
technological centerline opening in the bigger bell through which part of the
coke is fed directly to the BF top center that making it possible to:
• Form a centerline coke column of a given form and size,
including a continuous one up the height of the furnace;
• Maintain a distributed centerline gas flow thus eliminating the reasons for
clogging the hearth;
• Form efficient L-type softening zone;
• Increase degree of application of recouping capability of the blast furnace
gas by 2-4%;
• Ensure stability in blast furnace operation.
Optimal radial gas distribution is characterized with the following
circumference CO2
concentration in the BF top gas: 14-18% at the walls, 20-22% in the top, 4-6%
in the centerline zone. Different modifications of charging devices – with
quick rotating burden distribution devices, with movable plates in inter-cone
space – considerably expand technical possibilities of control of radial and
circumference distribution of burden and gases and additionally reduce coke
consumption by 3-5kg/t iron. All modifications are protected with patents.
Operation period is 3-3,5 years, installation costs are paid back after half
a year.
|
3
|
|
0
|
867
|
Pryazovskyi State Technical University
|
Steel deoxidation method in tilting open-hearth furnace
|
Steel deoxidation method in tilting open-hearth furnace is a rational technology
of preliminary deoxidation of carbon steel, including rail steel before
tapping. Rationality lies in using the following materials as deoxidizers: •
Low-cost ferroalloys with low content of deoxidizing element, which reduces
the amount of deoxidation products; • Low silicon ferrous abrasive waste,
whose usage allows 5-20 kg/t higher yield due to 100% recovery of iron.
Lower coke consumption by 0.5 kg/t steel makes this method even more
cost-effective. It can also be employed in steel deoxidation in stationary
open-hearth and electric arc furnaces. Method novelty is probed by the patent
of Ukraine and its economic and technical feasibility is supported be the
results obtained after its application at Azovstal Iron and Steel Works
(Mariupol).
|
3
|
|
0
|
868
|
Pryazovskyi State Technical University
|
Casting method for steels intended for enameling
|
Casting method for steels intended for enameling: includes feeding of titanium
containing material into the steel jet providing chemical capping of ingots.
Feeding conditions are based on calculation of the feeding moment by which
titanium is fully dissolved while the mould is being filled, resulting in
less amount of non-metallic inclusions in steel, lower ferrotitanium
consumption by 0.1 kg/t steel, and lower steel consumption for rolling by 3
kg/t. Calculation of feeding moment offers lower process cost compared with
conventional method where ferrotitanium is supplied on the liquid metal
surface which causes greater titanium oxidation in air and pulling of the
oxides inside the ingot. The new method of reducing oxidation and enhancing
recovery of titanium which binds hydrogen ensures the conformity of low-cost
08KP steel to the requirements of GOST 24244-80 to extra deep drawing steel
products, first grade of quality. The method is patented in Ukraine and its
efficiency is confirmed by pilot production testing at Ilyich Iron and Steel
Works of Mariupol.
|
3
|
|
0
|
869
|
Pryazovskyi State Technical University
|
Using palladium as catalyst in metallurgy
|
Using palladium as catalyst in metallurgy: provides a means of intensive iron
recovery form iron ores. Feeding micro-doses of palladium and its compounds
into the reaction space of the recovery furnace enhances the process of
recovery 3 to 8 times. The efficient method of palladium compounds feeding is
in combination with carbon materials such as on the surface of the blast
furnace coke. Catalyst consumption does not exceed 0.00001 of carbon
consumption. And the catalytic effect of a single feed is retained for
prolonged time as a result of formation of volatile palladium compounds. This
method has no analogs in ferrous metallurgy. Its patentability is supported by
laboratory testing.
|
3
|
|
0
|
870
|
Pryazovskyi State Technical University
|
Nickel-free metastable functional steels and irons
|
Nickel-free metastable functional steels and irons: high-strength, wear, heat,
and corrosion-resistant structural, instrumental and strengthening
technologies of thermal, chemicothermal, thermomechanical treatments, repair
by surfacing for the proposed and widely used materials creating metastable
phase conditions which provide controlled strain phase transformations during
operation that ensure:
• self-control of parts and tools;
• enhancing of mechanical and operational parameters (strength, ductility,
wear-resistance, life, cavitation strength, etc.);
• ensuring or exceeding the operation life and reliability of conventionally
used high-cost materials;
• saving of deficit alloying components – nickel (to 90-100 kg per 1t of
steel), molybdenum, vanadium, niobium when replacing high-cost conventional
materials by the new ones.
All technical solutions are patented and positive experience of introduction
is available and probed by cost and profit estimations.
|
3
|
|
0
|
871
|
Pryazovskyi State Technical University
|
High strength wear resistant steels and irons
|
High strength wear resistant steels and irons of various structural classes
and applications are obtained based on the principle of self-hardening when
stressed in the process of operation. This principle is realized by alloying
and heat-treatment taking into account the stressing conditions for specific
parts, tools and the equipment. As a result, the surface life increases 1.5-2
times which is a proof of power and material saving effect of the technical
solutions, also including replacement of:
• conventional heat treatment conditions by the advanced accelerated methods
with the cycle reduced by 20%;
• alloying by expensive and scarce ferroalloys with alloy steel waste;
• heat-resistant high-nickel steels by economically alloyed by nickel or
nickel-free manganese-based steels;
• nickel-containing surfacing materials by nickel-free manganese-based
materials.
Manganese containing materials have equal or even higher strength than nickel
containing materials. Complex approach providing for recycling of production
waste, replacement of nickel by manganese, optimization of heat treatment and
the achieved level of strength, wear resistance and durability of new
materials ensures process variations, flexibility of a wide range of alloys
production, as well as profiting three times as much as invention realization
costs.
|
3
|
|
0
|
872
|
Pryazovskyi State Technical University
|
High quality automotive sheet
|
High quality automotive sheet is manufactured from new low-cost steel by cold
rolling ensuring the world standard mechanical properties and surface
quality. As introduction of this method does not require any capital
investments but only certain rearrangement of steel making and rolling mill
facilities, it may serve as a base for creation of a national metallurgical
base for automotive industry. Laboratory testing was performed, major quality
parameters were established, production testing facilities are available. The
entire complex of technical solutions is protected by 27 author’s
certificates and patents of Ukraine and Russia; and patents of Bulgaria,
Germany and Czech Republic have also been received.
|
3
|
|
0
|
873
|
Pryazovskyi State Technical University
|
High precision high quality disks
|
High precision high quality disks for radio and electronic, machine building,
automotive industries are manufactured using environmentally safe rotary
rolling method using special disk rolling mill. Its design allows rolling of
products of different materials and alloys of various grades and types with
specified properties. Rolling conditions at various strain rates increases
productivity by increasing rotary velocity of work rolls. The method is
unique in the opportunities it offers for controlling the high-speed rolling,
optimizing its conditions, and manufacturing of:
• magnetic disks from non-magnetic materials for memory storage devices;
• circular texture reducing anisotropic magnetic properties in reciprocal
perpendicular directions;
• mirror-like surface of products that may be used as light decorating
elements for lamps, chandeliers, panels, etc.
This method excludes:
• rough grinding using diamond tools;
• exit of internal defects onto the surface of the blank;
• metal loss in chip scrap.
The method was tested under the programs of industrial and military complexes
and is protected by patents of Ukraine and Russia. Trial lots of disks may be
manufactured in the university laboratories. Disk apcher-type mills are being
designed for commercial production in the existing industries.
|
3
|
|
0
|
874
|
Pryazovskyi State Technical University
|
Grease for liquid metal rolling
|
Grease for liquid metal rolling: safely screens and prevents metal sticking
on the rolls, particularly in aluminum production. This is a simple mixture
of organic and non-organic products in the brińketed form convenient for
transportation and storing which makes application of the grease more
efficient. Direct contact with rotating rolls forms, due to presence of
hydrophobic components, a thin uniform layer of grease having light
tangential sliding and sufficient strength at high loads. The technological
process of grease production is waste-free, by-product-free, does not produce
any hazardous substances and does not require any complicated or specialized
equipment. The list of grease ingredients, the process of manufacture, test
results and service recommendations are available.
|
3
|
|
0
|
875
|
Pryazovskyi State Technical University
|
Microalloying of melts by core wire
|
Microalloying of melts by core wire with highly active elements enhances the
efficiency of ladle treatment of hot metal and steel. Performed by in-line
treatment at various conversion stages, characterized by mobility and
reliability of feeding of reagents. The process is low-cost, ensures 1.5-2
times saving of chemical reagents and 3-4 times less heat loss. Environmental
advantage includes threefold reduction of gas and dust emissions, and
technological advantage includes prevention of clogging of steel casting
nozzles. The result of microalloying is increased cold resistance and 1.5-3
times higher through-thickness isotropic mechanical properties of the rolled
plates. It is used for manufacture extra clean critical application steels
for gas and oil big diameter pipelines, floating oil-drilling plat forms,
ship-building. Patentability of the developed method is supported by 18
protection certificates.
|
3
|
|
0
|
876
|
Pryazovskyi State Technical University
|
Energy-saving and reliable machine drives for various applications
|
Energy-saving and reliable machine drives for various applications –
developed by optimization of the design using minimum mass criterion that
reduces the mass of the machine and hence, the motor starting moment thus
minimizing the specific power consumption of the motor. They are made with
progressive fine-module high-capacity wave gears smaller in size and 1.7 –
2.5 times less in weight compared to similar non-wave gears. It results in
their high kinematical precision and 35 – 40% lower dynamic load. Parts for
such gears are manufactured from economically alloyed steels (30HGSA etc.).
Reliability of the drives, their high technological and economical levels are
substantiated by their application for construction of basic oxygen furnace,
mobile 600-t mixer vessel, ore-crushing mills, rotor and single-bucket
excavators. The technological solutions contained in 52 patents offer
research-cost-free production of the new drives that ensure extended service
life of metallurgical, transport, ore mining, lifting and other
machine-types. Calculation methods and monographs on the development and
manufacture of drives with progressive wave gears are available.
|
3
|
|
0
|
877
|
Pryazovskyi State Technical University
|
Failure control of heavy industry equipment
|
Failure control of heavy industry equipment including various types of
rolling mills, presses, cranes etc. using buffer and shock-absorbing devices
based on polyurethane elastomers, and using safety devices with consumable
elements as well as automated. They include buffers, damping devices, shock
absorbers, spring couplings, expansion clutches reducing non-technological
stresses, and overload controls. Technologically effective, self-contained,
safe and reliable, they increase the service life of equipment 2 – 5 times.
They can be employed in mining, transport and other heavy-duty machinery.
Novelty of the devices is supported by 15 patents of Ukraine and Russia.
Positive results from the production-scale use are available; certain devices
have been in operation in steel industries for 8 – 10 years. Supplies of
finished products may be organized. Collection of scientific papers “Failure
control of metallurgical machines” is issued annually.
|
3
|
|
0
|
878
|
Pryazovskyi State Technical University
|
|
Building-up method for jointed parts, tools, assemblies of equipment and
safety devices, in which fixation of conjugating components is achieved by straining
under the effect of a local heat source: welding arc, plasma jet, laser beam
etc. Based on the entirely new principle of connection of elements and the
level of useful properties of the parts, it excludes labor and power costs on
heat treatment and machining required for achieving the specified tightening
conditions for the components and for assembling, making possible to avoid:
• using of high-precision machining equipment;
• oxidation of the connecting surfaces at high temperatures.
Use of the thermotension effect during local heating for modification of the
tensioning conditions of the enclosed rod or shaft allows manufacturing of:
• built-up mill rolls, wheels and other parts having different requirements
to service properties of individual components, as well as alternative
requirements in certain cases;
• safety couplings and other safety devices that protect machines and units
from failure under overload conditions.
Fixation of model built-up unit components using local heat source was
performed successfully testifying to the reliability of the proposed method.
The patent of Ukraine was received.
|
3
|
|
0
|
879
|
Pryazovskyi State Technical University
|
Broad-zoned surfacing of the wear-resistant layer
|
Broad-zoned surfacing of the wear-resistant layer: used both for
reconditioning and hardening of wearing parts of rolling mills, metallurgical
and machine-building equipment, and for manufacturing of new components.
Surfacing is performed using cold rolled electrode tape, which improves the
quality of the components’ work surface enhancing their performance.
Application of a wide layer of metal on the work surface ensures the process
productivity, thus reducing the cost of equipment reconditioning. Thus, surfacing
of the worn components of rolling and metallurgical equipment at Ilyich Iron
& Steel Works, Mariupol, using electrode tape expedited the process of
reconditioning 1.5 times, and performance of the surfaced components improved
by 20 – 25% as a result of hardening.
|
3
|
|
0
|
880
|
Pryazovskyi State Technical University
|
Disposable technological coatings for chill molds and replacement steel
casting equipment
|
Disposable technological coatings for chill molds and replacement steel casting
equipment are volatile-insulating, diffusion-active suspensions, density 1.17
g/ cm2, pH 6.8 –
7.2. In addition to nonsticking properties during casting of rimming steel
grades and manufacture of iron castings in metallic molds, they protect the
mold work surface from metal matrix oxidation as well as from
decarburization, improve erosion resistance and stabilize mold metal
structure. This effect is supplemented by the property of the coating to
prevent such defects as “sliver”, “bead” and “torsion” in rimming steel
castings, i.e. to produce high quality material. The coatings are applied by
spraying with automatic / semiautomatic suspension flow control and
autocleaning. Technological solutions representing this innovation are
protected by three patents of Ukraine.
|
3
|
|
0
|
881
|
Pryazovskyi State Technical University
|
Pulse pump for explosion-free demolition of concrete structures, rock
drifting and lance-free breaking of metallurgical vessels’ lining
|
Pulse pump for explosion-free demolition of concrete structures, rock
drifting and lance-free breaking of metallurgical vessels’ lining,
manufactured based on percussion-type universal hydraulic drive maintaining
high efficiency independently of the selected intensifier ratio. Test
operations performed on concrete “500”, exceeding coal rock in hardness,
demonstrate higher productivity of the explosion-free drifting. Improvement
of concrete breaking efficiency compared to pneumatic method, explosive
actuated rock breaking and pulse water-jet method is 100, 50 and 8 times
higher, respectively, and is supplemented by high manufacturability of the
pump due to three-fold shorter run of movable components. Use of hydraulic
drive in place of pneumohydraulic drive makes feasible:
• simplification of pump design and control;
• safe pump operation due to initialization and acceleration of movable parts
by liquid pressure only;
• employing natural seepage through seals for controlling the work run and
the idle run of the pump.
The technological level is proved by the patents and by the successful
operation over a few years in high-speed cutting of profiles during pressing
at Stupinsky and Belokalitvinsky iron and steel works.
|
3
|
|
0
|
882
|
Pryazovskyi State Technical University
|
Non-clogging devices for application of low stability solutions
|
Non-clogging devices for application of low stability solutions (e.g.
technological lubricants) on working components of the machines, in which
non-clogging of pipelines is achieved by the operation conditions during
lubricant feeding or during pipeline purging when lubricant residues are
removed. It makes unnecessary to use oversize high-cost and unreliable sine
control systems for air and solution flows. Simplicity and high
manufacturability of the device can be attributed to the absence of
complicated small-section piping and presence of only one pipeline operating
under successive feeding and purging conditions. This device was implemented
in the Rail Fasteners Mill of Azovstal Iron & Steel Works, Mariupol. It
would be appropriate to make use of this device at industries incorporating
hot and cold pressure forming. Patentability is confirmed by protective
documents.
|
3
|
|
0
|
883
|
Pryazovskyi State Technical University
|
Polyurethane compensator of slide run errors for open-type presses
|
Polyurethane compensator of slide run errors for open-type presses is
manufactured in the form of an elastic plate having variable through-width
toughness, due to which it has many-fold less thickness compared to similar
devices, thus providing deformation of less than 30%. Having such
deformation, it can withstand 7x106 stress cycles thus increasing the service
life of certain structures. Through-width toughness variability of the
compensation plate is achieved by the presence of a certain (calculated)
number of holes with unequal pitch in the specified direction. Errors caused
by the frame opening are compensated by non-uniform compression of the plate,
and inaccuracies of slide movement in the horizontal plane are compensated by
polyurethane sliding against the support surfaces of the die and of the
slide. Application of grease filled into the plate openings is also possible.
Application of the compensators in presses IPR1812 and KA1739 in the Rail
Fasteners Mill of Azovstal Iron & Steel Works, Mariupol, increased their
service life. Compensator designs are patented. It allows simplification of
the design thus reducing the manufacture cost ten-fold.
|
3
|
|
0
|
884
|
Pryazovskyi State Technical University
|
Reconditioning of the designed dimensions of the roll cradles using
metal-polymeric materials
|
Reconditioning of the designed dimensions of the roll cradles using
metal-polymeric materials is performed without rolling stand dismantling and
machining and within the period not exceeding the rolling mill overhaul
schedule. Special properties of metal-polymeric materials ensure:
• damping of impact stresses acting upon the frame;
• reduction of specific loads during rolling as a result of the perfect
contact between the protection bar face and the frame surface;
• protection of the support surface from water that prevents corrosion and
fracturing of the corroded zones.
In addition, the service properties, exceeding those of metal (compression
strength 180 – 200 MPa, heat resistance to 200o C, specific weight 2.5 – 2.8 g/ cm3) are contributing to the
advanced nature of the new repair technologies. The results of repair of
various components amounting to over 20 items prove their increased service
life 1.8 – 2.5 times. Labor and time consumption also decreases, the cost is
10-50 times less. Reconditioning of the worn support surfaces of the frames
was performed in rolling mills 1700, 3000, 3600 of Mariupol iron and steel
works Azovstal and Ilyich.
|
3
|
|
0
|
885
|
Pryazovskyi State Technical University
|
Reconditioning of bearing housing with metal-polymeric materials
|
Reconditioning of bearing housing with metal-polymeric materials without full
disassembling of the equipment and without machining is advisable when:
• the machine frame cannot be dismantled from the foundation and sent for
surfacing and machining;
• the repair shall take 24-36 hours due to operation conditions;
• the machine frame is made from cast iron and surfacing presents difficulty;
• machine shops are overloaded;
• traditional methods of bearing housing reconditioning do not guarantee
long-time operation due to dynamic loads acting upon the bearing housing.
Mandatory repair conditions:
• environment temperature not below 10°C;
• free access to the bearing housing.
Guaranteed operation 1 to 5 years (depending on the conditions).
This technology is successfully employed at Azovstal Iron & Steel Works,
Nikopol Pipe Works and other industries.
|
3
|
|
0
|
886
|
Pryazovskyi State Technical University
|
Reinforced concrete baseplate for railway switches
|
Reinforced concrete baseplate for railway switches replaces wooden bars whose
service life (6 – 8 years) implies expenses for deficit high-cost industrial
wood. It is also more effective from technical and economical viewpoints: 4.5
– 5 times in terms of costs of one year of operation; 2 – 2.2 times in terms
of maintenance labor costs. Cost-effectiveness of reinforced concrete
baseplates (in all operation environments) increases with growing of traffic
concentration and axial loads – profit from each set is UAH24 thousand. Among
advantages is also the possibility of laying the railway switch in L-H and
R-H directions using building cranes for this purpose and for unit-wise
erection, replacement without removing the reinforcement concrete plates,
insulation of rail lines, reliable operation of the track switch. Three sets
of of baseplates for R65 railway switches are successfully operating at
Azovstal Iron & Steel Works.
|
4
|
|
0
|
887
|
Pryazovskyi State Technical University
|
Technology for passenger car components repair
|
Technology for passenger car components repair allows organization of
systematic reconditioning of wearing spring suspension performed
spontaneously using available means. Spring suspension components are
reconditioned by surfacing using powder tape, inexpensive material provided
by the designers-manufacturers and made from carbon containing waste
improving the quality of the surfacing. Physical and mechanical properties of
the surfacing material ensure higher performance of the reconditioned
components; labor intensiveness of reconditioning, however, is 2 times lower.
The efficiency of such repair was demonstrated by trial operations at
Azovmash machine-building concern.
It is supported by the following results:
• lower labor consumption of the repair;
• higher reliability of the components;
• longer service life between repairs.
|
15
|
|
0
|
888
|
Pryazovskyi State Technical University
|
Composition for pipe scale removal
|
Composition for pipe scale removal is made from the waste material of
chemical and biological industries of Ukraine, which are the base operations
for production of such composition. Use of the waste material makes unnecessary
importing of raw materials to produce pipe scale removal agents; besides, the
new composition is more efficient as it is designed for pipelines where hard
water is added into the heat carrying agent to make up for the breakthroughs
in the line. It is a critical material for Donetsk region because of high
content of hardness salts in the regional water resources; it is also
applicable for cleaning of cooling systems in automobiles, for washing
machines etc., while specific cost of the chemical treatment is by far lower
compared to electromagnetic pulse or impact wave generation methods. Cost
effectiveness of the proposed composition is realized not only through low
prime cost but also through cheaper operation costs of heat exchange systems,
as cleaning using this composition will reduce the expenses for:
• energy carriers due to improved heat transfer;
• replenish energy carrier to make up for the losses caused by the equipment
malfunction;
• dismantling of the failed equipment, purchase and installation of the new
equipment;
• repair and maintenance.
The database of scale removing agents is available, patent information review
has been made, the new composition formula has been developed, laboratory
tests have been performed.
|
6
|
|
0
|
889
|
Pryazovskyi State Technical University
|
Microbiological anaerobic treatment of sewage effluents and manure in situ
without transportation and connection into the sewage system
|
Microbiological anaerobic treatment of sewage effluents and manure in situ
without transportation and connection into the sewage system ensures
elimination of helminth eggs and obtaining of:
• methane biogas providing 550 – 700 billion kWhr of electric power in the
world (recycling of 1 t of manure may produce 350 - 500 m3 of methane, calorific value
5000 kcal/m);
• disinfected fertilizers with minimum availability of minerals (the amount
of available nitrogen may be as high as 100%, potassium 80%, phosphorus 70%).
However, most importantly, methane fermentation of liquid manure and sewage
effluents meets all the environmental requirements. The process is performed
in a biological installation consisting of an accumulating tank, methane
tank, methane combustion and water heating unit and, if required, electric
generator and fertilizer briquetting machine. Such installations may be
manufactured on site or at a factory. The design of an installation is
available, working capacity of the methane tank 5 m3, capable of recycling of
one farm or a 50 – head pigsty, or a standard recreation base toilet.
|
1
|
|
0
|
890
|
Pryazovskyi State Technical University
|
Production of light oil and bitumen (or goudron)
|
Production of light oil and bitumen (or goudron) in recycling of
oil-containing waste (ship waste water, used oils, water-oil mixtures) by
separation of the material in a special installation. The process includes:
• step-wise heating for liquid and vapor separation, decomposition of oils
into light unsaturated hydrocarbons;
• saturation of gas mixture by hydrogen compounds producing hydrocarbons;
• condensation of individual fractions followed by their homogenization, out
of which light oil is shipped to the customer.
Bitumen or goudron are formed in the boiler as a result of decomposition.
Heat required for the process is produced by non-condensed gases and by
combustion of oil products to be recycled, of which 10% are used. Upon
recycling, the output of light oil is 40%, M40 fuel oil 20%.
|
1
|
|
0
|
891
|
Pryazovskyi State Technical University
|
Environmentally friendly method of increasing oil and gas extraction by 10 –
50% using plasma generator of high-power elastic pulses
|
Environmentally friendly method of increasing oil and gas extraction by 10 –
50% using plasma generator of high-power elastic pulses whose effect on the
layer allows overcoming the 20% oil extraction limit due to clogging of
channels. It replaces environmentally non-friendly acid and alkaline method
where dozens tons of concentrated acid and alkali are poured into the
borehole. Maximum transformation of the accumulated energy into pulse energy
is achieved by the control method, which is impossible when using explosion
sources. The specification excludes placing of the generator into the well
bottom zone, which contributes to intensification of oil and gas extraction
process. Structural features are given in the patents of Ukraine. The pilot
generator was tested on the wells of Akhtyrka, Sumy region. It is recommended
to introduce it in the process of extraction.
|
1
|
|
0
|
892
|
Pryazovskyi State Technical University
|
Synthesizing of resistant diamond coating area up to 100 x 100 mm
|
Synthesizing of resistant diamond coating area up to 100 x 100 mm is done in
carbon-hydrogen low-temperature plasma at near to atmospheric pressure with
chemical composition of the activating medium controlled. The process
includes growing of diamond grains on a metallic substrate in plasma reactor
followed by their separation from the substrate in powder form and
classification of the powder. This method is advantageous compared to
synthesizing of diamond coating in high-pressure apparatuses due to low cost
of the process equipment, minor operation and power costs, high environmental
compatibility. In addition, crystal growth rate is as high as 100 mm/hr, the
diamond quality is much higher than of the natural material, the diamond is
more wear- and heat resistant, which makes suitable application of diamond
coatings in the electronic industry for manufacture of high heat conductivity
components. This technology enables addition of alloying elements into the
diamond, which is important in manufacture of semi-conductors. In
instrumentation industry extra-hard materials are manufactured from synthetic
diamonds and diamond film is applied on the cutting edge of tools.
|
3
|
|
0
|
893
|
Pryazovskyi State Technical University
|
Device for information read-out from moving components of rail-way transport
|
Device for information read-out from moving components of rail-way transport
is used in automated control systems in rail-way transport (and other types
of transport). Retains speed of operation and high credibility of the
read-out information at any speed of movement. Compact and convenient in
operation, reliable at various degrees of rolling-stock wear, dirt
accumulation, icing, exposure to dust, snow, fog, steam; does not depend on
car fluctuations or temperature deviations within the range of -60…+125
degrees C; allows to speed-up the wagon- turnover through reducing detention
of cars to 11.8 mln car/hour a year, decrease by 4 persons the maintenance
personnel per one piece of automatic railway scales. The results from various
testing sites are available, patents of Ukraine and Russia.
|
2
|
|
0
|
894
|
Pryazovskyi State Technical University
|
Heat-resistant alloys with stable properties
|
Heat-resistant alloys with stable properties are obtained through
optimization of their composition and structure, as well as through
activation of the surface of initial metallic powders and mechanically
alloyed granules in glow discharge. Basically new methods of chemical and
thermal treatment of powders in glow discharge and
magnetic-electrical-liquefied layer provide cleansing the surface of
admixtures, removal of not only adsorbed gases but oxide film as well. To
achieve this, appropriate installations have been created; to realize the
entire technological cycle, installations for mechanical alloying of alloys,
filling and patching in vacuum have been additionally developed. The press of
OAO “Azov” Company is used for compacting mechanically alloyed granules in
the capsule. Physical and chemical principles of obtaining mechanically
alloyed alloys have been developed; optimization of composition and structure
of nickel- and ferrum-based alloys has been performed; a pilot batch of
semi-products of the above alloys had been produced and their properties have
been tested. The properties of the new alloys being guaranteed, they are sure
to find wide application in industries. The achieved enhancement of their
heat- and acid-resistant properties allows manufacturing high-temperature
units for nuclear and chemical reactors, engines for aviation with an
increased by 5-7% efficiency factor.
|
3
|
|
0
|
895
|
Pryazovskyi State Technical University
|
Making of complex cutting tool
|
Making of complex cutting tool (blade, bore, saw, lathe cutters, face-milling
cutters, end mills) tipped with diamond hard-alloyed plates and cubic
boron-nitride, is performed following the technique of welding under pressure
at temperatures not exceeding 700-900 degrees C in vacuum approximately 0.01
Pa in the modules of thermo mechanical compression. Disuse of scarce and
expensive argentums-containing solders excludes application of carcinogenic
re-agents, thus reducing the costs and making the technology more
environmentally-friendly. Besides, the compound of super-hard elements based
on argentums-containing solders is 2 times less strong. Wear resistance of
this tool as compared with carbide-tungsten has increased by 5-6 times when
machining ferrous metals and 15-20 times when processing thermo reactive
polymer composite materials, high carbon and high silicon silumin alloys and
other, thus increasing the processing speed. By surface finish parameters the
processed materials do not yield in their characteristics to the polished
surfaces. New tool can be used for machining hardened steels and irons,
non-ferrous metals, special non-metallic materials, in mining, boring,
wood-processing and civil construction industries. Technological parameters
of its fabrication and application are protected with 5 patents of Ukraine.
|
3
|
|
0
|
896
|
Pryazovskyi State Technical University
|
Charging system for blast furnace with tray-type charging device
|
Charging system for blast furnace with tray-type charging device, is used at
blast furnaces Nos. 3 and 4 at OAO “MK Azovstal”. Ensured feeding of coke
both to the center of the furnace mouth and to the ore ridge. Intensifying
the gas flow in this area allows reducing coke consumption by 16kg/t iron and
enhancing the furnace productivity by 60t per day.
|
3
|
|
0
|
897
|
Pryazovskyi State Technical University
|
New energy saving methods of heating open-hearth furnaces
|
New energy saving methods of heating open-hearth furnaces, allow to reduce
the specific consumption of fuel and energy carriers, expand the
opportunities for technological process control and decrease hazardous
emissions into environment. Have been introduced at 5 open-hearth furnaces in
the shop of OAO “MK Azovstal”. Using the new methods of heating resulted in
1999 in saving of 10 thou t of fuel (mazut + natural gas); the annual
economic effect amounted to more than 2 mln UAH in the prices of 1999.
|
3
|
|
0
|
898
|
Pryazovskyi State Technical University
|
Oxygen nozzle stock and differentiated technology of converter melting
|
Introduction of this technology at OAO “ML Azovstal” allows a real-time
control of the blast, slag and temperature conditions of melting. As a
result, the process of slag formation and blast conditions of melting were
stabilized, heat losses and waste of metal in BOF were reduced, technical and
economic parameters of steel melting were improved in the conditions of
repeating changes of the initial operational conditions (burden and energy
carriers parameters, intensity of the aggregates operation, etc.). Specific
consumption of metallocharge was decreased by 5.5kg/t steel, durability of
copper nosepieces of oxygen nozzles was 1.4 times increased. Annual
summarizing benefits from implementation amounted to $1mln US.
|
3
|
|
0
|
899
|
Pryazovskyi State Technical
University
|
New method of rolling slabs
|
New method of rolling slabs, has been introduced at OAO “MMK Ilyich” allowing
to roll without failure unkilled amd semikilled steels including those cast
into moulds with high degree of wear. Consumption coefficients have been
reduced by 10 kg/t steel through decreasing bottom cutting. Average mass of
hot-rolled coils increased from 8.1 to 8.2 tons. Overall economic effect
during one year of operation amounted to 4.267 mln UAH. The technological
solution was awarded the prize at the “Vinahid-2001” competition and
acknowledged as the best in Donetsk region.
|
3
|
|
0
|
900
|
Pryazovskyi State Technical
University
|
Anti-corrosion lubrication compositions and lubricants for working metals
with pressure
|
Anti-corrosion lubrication compositions and lubricants for working metals
with pressure, have been created on the basis of environmentally-friendly
safe mineral substances using the by-products of various types of production.
Realization of the lubricants at the enterprises of Ukraine ensured overall
economic effect of 316 th UAH.
|
6
|
|
0
|
901
|
Pryazovskyi State Technical University
|
Sorbent for safe burial of radioactive isotopes
|
Sorbent for safe burial of radioactive isotopes, is intended for catching
radioactive anions in gaseous and liquid medium, in waste waters in
particular. The sorbent is not toxic, its high stability allows converting
the absorbed substances into insoluble state, which makes the burial safe,
protecting it from being carried over by underground waters.
|
1
|
|
0
|
902
|
Pryazovskyi State Technical University
|
Installation for washing cisterns
|
Installation for washing cisterns, is designed on a principally new
kinematical system. Allows performing deep input of washing heads into the
vessels with narrow neck. Ensures quality of washing at low pressure and
reduced consumption of washing liquid.
|
3
|
|
0
|
903
|
Pryazovskyi State Technical
University
|
Technological processes and specilaized auxiliaries for plasma surface
hardening of metal-working tools
|
Technological processes and specilaized auxiliaries for plasma surface hardening
of metal-working tools, allow to achieve a qualitatively new, higher level of
operational properties of structural materials (steels, alloys) through:
high-productivity, economical, easy-in-operation and available equipment;
vast area of the hardened zone; using of plasma hardening methods in
combinations with volumetric thermal treatment, induction tempering and
surfacing. The developed technologies of hardening provide means for
obtaining composite many-layer structural materials possessing both high
degree of hardness of the surface layer and high degree of crack resistance
of the entire composition. During plasma hardening, economically-alloyed
structural materials acquire properties of high-alloy materials. Specialized
auxiliaries have been developed, i.e. a series of plasmatrons of indirect
effect, using inert gas (argon) which are compatible with conventional
equipment manufactured for plasma cutting, welding, surfacing and spraying.
Overall economic effect is achieved due to decreasing labour-output ratio and
increasing processing productivity, reducing tool consumption, saving
expensive high-alloy materials and energy resources. Plasma hardening
technologies have been introduced at OAO “MK Ilyich”, OAO “MK Krivirozhstal”,
Vitebsk Television Plant (Belarus), Novomoskovskii Pipe Works and at other
enterprises.
|
3
|
|
0
|
904
|
Pryazovskyi State Technical
University
|
Technology and materials for wear-resistant surfacing of hot-rolled mills
rollers
|
Technology and materials for wear-resistant surfacing of hot-rolled mills
rollers, are used in metallurgy, heavy and power-engineering
machine-building. Are intended for:
• Sheet-rolling rollers made of steel grades 75XM, 90 XO, etc. (e.g. rollers
KUŃ-1700 of scalebreaker; working and back-up rolls of roughing and finishing
stands);
• Primary mills’ rolls, 40-69 XH steel (blooming, slabing);
• Plate mill rolls, NEŃ 300i NEŃ 3600 (back-up banded and )
• Pilger mill rolls;
• Continuous casting plant rollers;
• Rollers of the bed group, rollgangs (conical and cylindrical);
• Back-up rolls of straightening machines, etc.
Were introduced at the facilities of OAO “MMK Ilyich”, OAO “MK Azovstal”,
etc.
|
3
|
|
0
|
905
|
Pryazovskyi State Technical University
|
Electrical energy flow controller
|
Electrical energy flow controller, is intended for smoothed changes in
voltage and current strength flowing through the load . Can be used in the
articles which require variations of engine rpm, variations of temperature
conditions, i.e. electric stoves, electric cabinets, greenhouses; to control
illumination, e.g. stairs or entrance. Is characterized with the absence of
the contact groups, simplicity in design, optional models for overhead
assemble which allow locating the controller elements in most convenient
places with consideration of the temperature effect of the heating elements.
Application of the controller in electric stoves is in line with the
requirements to the technology of heat treatment of food products, reduces
fire risk. Simplicity of circuit solution makes it possible to manufacture
small-size controllers without specific preparations of production facilities
and does not require any additional personnel training. Testing the
controller in long-time operation at pilot installations of electrical
heating units confirmed its reliability and enhanced operational parameters.
Technical solution is protected with the patent of Ukraine and contains
“know-how”.
|
2
|
|
0
|